Advanced Visuohaptic Surgical Planning for Trauma Surgery
2020年7月2日 更新者:VA Office of Research and Development
This study proposes to develop a computer-based software tool that will allow surgeons to plan and simulate surgery for patients with jaw trauma.
調査の概要
詳細な説明
The proposed tool will allow surgeons from different specialties to simulate, plan and iterate on complex procedures based on individual patient data in 3-D from a CT scan.
The software will allow surgeons to both see and feel the results of their interventions - for example, the quality of the bite or bone alignment of a reconstructed jaw following severe trauma - before the actual surgery, leading to better planning, fewer errors, shortened surgery time and improved outcomes for the patients.
The purpose of this study is the evaluation of a visuohaptic planning system for mandibular trauma surgery that is based on interactive manipulation of CT data.
研究の種類
観察的
入学 (実際)
3
連絡先と場所
このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。
研究場所
-
-
California
-
San Francisco、California、アメリカ、94121
- VA Medical Center, San Francisco
-
-
参加基準
研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。
適格基準
就学可能な年齢
18年歳以上 (大人、高齢者)
健康ボランティアの受け入れ
いいえ
受講資格のある性別
全て
サンプリング方法
非確率サンプル
調査対象母集団
Study population will veterans who present to the Oral/Maxillofacial Surgery Clinic at the San Francisco VA Medical Center.
The study will use pre-existing data from patients undergoing reconstructive facial surgery at the San Francisco VA with clinic indications that require preoperative CT scans and preoperative radiographs as well as model casts.
説明
Inclusion Criteria:
- Craniofacial deformity, including post-traumatic, congenital or acquired deformity
- Patients who have already have surgery because there was a clinical indication for surgical correction
Exclusion Criteria:
- No craniofacial deformity
- No clinical indication for surgical correction
- Contraindication for surgical correction
研究計画
このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。
研究はどのように設計されていますか?
デザインの詳細
コホートと介入
グループ/コホート |
介入・治療 |
|---|---|
|
Group 1
15 patients who underwent surgical repair of mandibular fractures at San Francisco VA Medical Center
|
Patients will undergo whatever needed surgical repair of maxillofacial trauma that is necessary.
Records such as CT imaging and plaster models of the jaws will be utilized in the standard way to plan and carry out the surgery.
The CT scan will also be used within the visuohaptic computational environment to develop and evaluate the user interface.
The amount of time taken to work up and plan surgery using standard surgical practice and using the computational platform will be compared.
Real surgical outcome will be compared to the simulated surgical outcome using the proposed software tool.
|
この研究は何を測定していますか?
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Percentage of Deviation From Actual Surgical Outcome During Virtual Repair of Mandibular Fractures, Using the Novel Visuohaptic Computational Platform That Was Developed by the Investigators
時間枠:6 months
|
The virtual surgical outcome was compared to the actual surgical outcome.
This was accomplished by measuring distances (mm) and angles between specific mandibular anatomic points in the virtual environment and comparing it to the same distances (mm) and angles between specific mandibular anatomic points in the actual surgical outcome, as seen in a 3D rendering derived from the patient's postoperative CT scan.
The actual surgical repair was considered to be the gold standard.
A deviation of more than 10% between the virtual surgical repair and the actual surgical repair was considered to be above threshold (inaccurate virtual fracture repair).
|
6 months
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Development and Evaluation of Automation Features for the Visuohaptic Virtual Surgery Planning Environment
時間枠:3 years
|
The addition of automation features for the visuohaptic virtual surgical planning environment was envisioned to make it possible to predict the number, type, size, and position of reconstruction hardware (bone plates and screws) that would best fit the virtually repaired mandibular fractures.
The goal was to compare the hardware configuration selected and used in the actual surgical repair for the 3 participating patients with what the software predicted.
Unfortunately, the software development proved to be difficult to add this automated feature.
|
3 years
|
|
Implementation and Test of the Telemedicine Prototype
時間枠:3 years
|
Measurement of the accuracy of the virtual surgical repair generated by the surgeon operating the software when a remote surgeon digitally sends a CT scan of a patient with an acute mandibular fracture(s).
The telemedicine interface would require an automated method to segment the CT scan into the fractured components.
The operator would manipulate the bone fractures, select the hardware type and size for "best fit", and generate a report back to the remote surgeon.
|
3 years
|
協力者と研究者
ここでは、この調査に関係する人々や組織を見つけることができます。
捜査官
- 主任研究者:Rebeka Silva, DMD、VA Medical Center, San Francisco
出版物と役立つリンク
研究に関する情報を入力する責任者は、自発的にこれらの出版物を提供します。これらは、研究に関連するあらゆるものに関するものである可能性があります。
一般刊行物
- Schvartzman SC, Silva R, Salisbury K, Gaudilliere D, Girod S. Computer-aided trauma simulation system with haptic feedback is easy and fast for oral-maxillofacial surgeons to learn and use. J Oral Maxillofac Surg. 2014 Oct;72(10):1984-93. doi: 10.1016/j.joms.2014.05.007. Epub 2014 May 24.
- Forsslund J, Chan S, Selesnick J, Salisbury K, Silva RG, Blevins NH. The effect of haptic degrees of freedom on task performance in virtual surgical environments. Stud Health Technol Inform. 2013;184:129-35.
- Girod S, Schvartzman SC, Gaudilliere D, Salisbury K, Silva R. Haptic feedback improves surgeons' user experience and fracture reduction in facial trauma simulation. J Rehabil Res Dev. 2016;53(5):561-570. doi: 10.1682/JRRD.2015.03.0043.
研究記録日
これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。
主要日程の研究
研究開始
2011年11月1日
一次修了 (実際)
2014年12月1日
研究の完了 (実際)
2016年2月1日
試験登録日
最初に提出
2010年1月22日
QC基準を満たした最初の提出物
2010年1月22日
最初の投稿 (見積もり)
2010年1月26日
学習記録の更新
投稿された最後の更新 (実際)
2020年7月7日
QC基準を満たした最後の更新が送信されました
2020年7月2日
最終確認日
2020年6月1日
詳しくは
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。