Comparison of Laboratory-Fabricated and 3D-Printed Rapid Maxillary Expansion Appliances
2026年9月3日 更新者：Baskent University
Comparison of the Skeletal and Dentoalveolar Effects and Patient Comfort of Conventional and 3D-Printed Maxillary Expansion Appliances in Mixed Dentition Patients
The goal of this clinical trial is to determine whether two types of rapid maxillary expansion (RME) appliances produce different outcomes in children. RME is a treatment utilized to expand a narrow upper jaw. This study will include children aged 8 to 10 years who need upper jaw expansion during the mixed dentition period (when they have both temporary and permanent teeth).
The main questions this study aims to answer are:
- Do 3D-printed expansion appliances produce different skeletal and dental changes compared to conventionally fabricated appliances?
- Do children feel more comfortable with one type of appliance?
- Is there a difference in pain levels or oral hygiene between the two groups?
Researchers aimed to compare a conventionally fabricated expansion appliance manufactured in a dental laboratory with a 3D-printed expansion appliance produced digitally to determine whether the method of production affects treatment outcomes and patient comfort.
Participants:
- Being treated with one of the two expansion appliances (assigned randomly)
- Follow a standard activation protocol at home with parental guidance
- Attend regular clinic visits during expansion and retention phases
- Have dental photographs, X-rays, and digital scans taken before and after treatment
- Complete an oral health-related quality of life questionnaire
- Rate their pain using a pain scale
- Have their oral hygiene measured
調査の概要
状態
積極的、募集していない
条件
詳細な説明
Treatment effectiveness, amount of expansion, and patient comfort will be evaluated between the two groups. Additionally, the impact of digital appliance production on treatment outcomes and patient satisfaction will be investigated.
This prospective, parallel-group, randomized clinical trial aims to compare the skeletal, dentoalveolar, and patient-reported effects of conventionally fabricated and three-dimensional (3D) printed rapid maxillary expansion (RME) appliances in children with transverse maxillary deficiency during the mixed dentition period.
Participants aged 8-10 years who meet the predefined inclusion criteria and require rapid maxillary expansion as part of their orthodontic treatment will be enrolled.
The results are expected to contribute evidence-based guidance for orthodontists when selecting appliance fabrication methods, balancing biological effectiveness with patient comfort and quality-of-life considerations.
Findings from this study may also support future digital workflow integration strategies in pediatric orthodontic treatment planning.
研究の種類
介入
入学 (実際)
48
段階
- 適用できない
連絡先と場所
このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。
研究場所
-
-
-
Ankara、トルコ（Türkiye）、06490
- Baskent University Faculty of Dentistry, Department of Orthodontics
-
-
参加基準
研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。
適格基準
就学可能な年齢
- 子
健康ボランティアの受け入れ
いいえ
説明
Inclusion Criteria:
- Children aged between 7 and 11 years
- In the mixed dentition period
- Fully erupted permanent first molars
- Presence of primary canines and primary second molars suitable for use as anchorage units for at least 6 months
- Angle Class I or Class II molar relationship
- Presence of posterior crossbite and/or moderate maxillary transverse deficiency or moderate crowding
- Prepubertal growth stage corresponding to Cervical Vertebral Maturation Stage 1 (CVM1) or Stage 2 (CVM2)
- Receiving orthodontic treatment at the Başkent University Department of Orthodontics
- Parents or legal guardians willing to provide written informed consent
Exclusion Criteria:
- Previous orthodontic treatment
- Periodontal disease
- Enamel hypocalcification or significant calcium deficiency
- Root resorption
- Signs or symptoms of temporomandibular joint dysfunction
- Angle Class III molar relationship
- Craniofacial syndromes
- Cleft lip and/or palate
- Known allergy to acrylic materials or metal alloys
- Inability to maintain adequate oral hygiene during treatment
- Lack of cooperation during treatment
- Repeated appliance breakage or dislodgement (three or more times)
研究計画
このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。
研究はどのように設計されていますか？
デザインの詳細
- 主な目的：処理
- 割り当て：ランダム化
- 介入モデル：並列代入
- マスキング：独身
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的：Laboratory-fabricated rapid maxillary expansion appliance
Participants are treated with a laboratory-fabricated rapid maxillary expansion (RME) appliance produced on a dental cast obtained from conventional impressions.
The arms of the palatal expansion screw are adapted and soldered to orthodontic molar bands on the cast model.
Following adaptation, acrylic resin is added in the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated on a dental cast obtained from conventional impressions.
The expansion screw arms are adapted and soldered to orthodontic molar bands on the cast.
他の名前：
|
|
実験的：3D-printed rapid maxillary expansion appliance
Participants are treated with a rapid maxillary expansion (RME) appliance fabricated using digital intraoral scans.
Dental models are generated from intraoral scan data, and the appliance framework, including the arms and tooth-supporting components, is manufactured as a single-piece structure using three-dimensional (3D) metal printing technology with sintered cobalt-chromium alloy.
After fabrication, acrylic resin is added to the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated using digital intraoral scan data.
Dental models are generated from intraoral scans, and the appliance framework is manufactured as a single-piece structure using three-dimensional (3D) metal printing with sintered cobalt-chromium alloy.
他の名前：
|
この研究は何を測定していますか？
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Change in maxillary transverse skeletal width and intermolar width from T0 to T2
時間枠：-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
The primary outcome is the difference in transverse skeletal maxillary width and maxillary intermolar width between baseline (T0) and the end of the 3-month retention period (T2).
Skeletal measurements will be obtained from standardized posteroanterior cephalometric radiographs, and dental measurements will be obtained from digital model analysis.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Wong-Baker FACES Pain Rating Scale score
時間枠：-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Pain perception will be assessed using the Wong-Baker FACES Pain Rating Scale at predefined time points during treatment.
Scores will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Child Perceptions Questionnaire (CPQ 8-10)
時間枠：-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral health-related quality of life will be assessed using the validated Child Perceptions Questionnaire (CPQ 8-10).
Total and domain scores (oral symptoms, functional limitations, emotional well-being, social well-being) will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Modified Silness-Löe Plaque Index score
時間枠：-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral hygiene status will be evaluated using the Modified Silness-Löe Plaque Index at predefined time points during treatment to monitor plaque accumulation and compare oral hygiene changes between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
その他の成果指標
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
3D digital model superimposition-based surface deviation
時間枠：-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Digital models obtained at T0 and T2 will be superimposed using the medial two-thirds of the third palatal rugae and the posterior palatal vault as stable reference areas.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
協力者と研究者
ここでは、この調査に関係する人々や組織を見つけることができます。
スポンサー
捜査官
- スタディチェア：Habibe Sinem Ince Bingol, DDS, Orthodontist、Hacettepe Unversity, Faculty of Dentistry, Department of Orthodontics
- 主任研究者：Sinem Tekdemir, DDS、Baskent University, Faculty of Dentistry, Department of Orthodontics
研究記録日
これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。
主要日程の研究
研究開始 (実際)
2025年8月7日
一次修了 (実際)
2026年7月31日
研究の完了 (推定)
2026年12月1日
試験登録日
最初に提出
2026年2月23日
QC基準を満たした最初の提出物
2026年5月14日
最初の投稿 (実際)
2026年5月20日
学習記録の更新
投稿された最後の更新 (実際)
2026年9月4日
QC基準を満たした最後の更新が送信されました
2026年9月3日
最終確認日
2026年9月1日
詳しくは
本研究に関する用語
キーワード
その他の研究ID番号
- D-KA24/41
- 2025-066 (その他の識別子：Turkish Medicines and Medical Devices Agency Clinical Trial Authorization Number)
- 25/31 (その他の識別子：Baskent University Institutional Ethics Committee Approval Number)
個々の参加者データ (IPD) の計画
個々の参加者データ (IPD) を共有する予定はありますか?
いいえ
IPD プランの説明
Individual participant data (IPD) will not be shared due to institutional policies, ethical committee regulations, and patient confidentiality considerations.
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
いいえ
米国FDA規制機器製品の研究
いいえ
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。