Comparison of Laboratory-Fabricated and 3D-Printed Rapid Maxillary Expansion Appliances
14. května 2026 aktualizováno: Baskent University
Comparison of the Skeletal and Dentoalveolar Effects and Patient Comfort of Conventional and 3D-Printed Maxillary Expansion Appliances in Mixed Dentition Patients
The goal of this clinical trial is to determine whether two types of rapid maxillary expansion (RME) appliances produce different outcomes in children. RME is a treatment utilized to expand a narrow upper jaw. This study will include children aged 8 to 10 years who need upper jaw expansion during the mixed dentition period (when they have both temporary and permanent teeth).
The main questions this study aims to answer are:
- Do 3D-printed expansion appliances produce different skeletal and dental changes compared to conventionally fabricated appliances?
- Do children feel more comfortable with one type of appliance?
- Is there a difference in pain levels or oral hygiene between the two groups?
Researchers aimed to compare a conventionally fabricated expansion appliance manufactured in a dental laboratory with a 3D-printed expansion appliance produced digitally to determine whether the method of production affects treatment outcomes and patient comfort.
Participants:
- Being treated with one of the two expansion appliances (assigned randomly)
- Follow a standard activation protocol at home with parental guidance
- Attend regular clinic visits during expansion and retention phases
- Have dental photographs, X-rays, and digital scans taken before and after treatment
- Complete an oral health-related quality of life questionnaire
- Rate their pain using a pain scale
- Have their oral hygiene measured
Přehled studie
Postavení
Aktivní, ne nábor
Podmínky
Detailní popis
Treatment effectiveness, amount of expansion, and patient comfort will be evaluated between the two groups. Additionally, the impact of digital appliance production on treatment outcomes and patient satisfaction will be investigated.
This prospective, parallel-group, randomized clinical trial aims to compare the skeletal, dentoalveolar, and patient-reported effects of conventionally fabricated and three-dimensional (3D) printed rapid maxillary expansion (RME) appliances in children with transverse maxillary deficiency during the mixed dentition period.
Participants aged 8-10 years who meet the predefined inclusion criteria and require rapid maxillary expansion as part of their orthodontic treatment will be enrolled.
The results are expected to contribute evidence-based guidance for orthodontists when selecting appliance fabrication methods, balancing biological effectiveness with patient comfort and quality-of-life considerations.
Findings from this study may also support future digital workflow integration strategies in pediatric orthodontic treatment planning.
Typ studie
Intervenční
Zápis (Aktuální)
48
Fáze
- Nelze použít
Kontakty a umístění
Tato část poskytuje kontaktní údaje pro ty, kteří studii provádějí, a informace o tom, kde se tato studie provádí.
Studijní místa
-
-
-
Ankara, Turecko (Türkiye), 06490
- Baskent University Faculty of Dentistry, Department of Orthodontics
-
-
Kritéria účasti
Výzkumníci hledají lidi, kteří odpovídají určitému popisu, kterému se říká kritéria způsobilosti. Některé příklady těchto kritérií jsou celkový zdravotní stav osoby nebo předchozí léčba.
Kritéria způsobilosti
Věk způsobilý ke studiu
- Dítě
Přijímá zdravé dobrovolníky
Ne
Popis
Inclusion Criteria:
- Children aged between 7 and 11 years
- In the mixed dentition period
- Fully erupted permanent first molars
- Presence of primary canines and primary second molars suitable for use as anchorage units for at least 6 months
- Angle Class I or Class II molar relationship
- Presence of posterior crossbite and/or moderate maxillary transverse deficiency or moderate crowding
- Prepubertal growth stage corresponding to Cervical Vertebral Maturation Stage 1 (CVM1) or Stage 2 (CVM2)
- Receiving orthodontic treatment at the Başkent University Department of Orthodontics
- Parents or legal guardians willing to provide written informed consent
Exclusion Criteria:
- Previous orthodontic treatment
- Periodontal disease
- Enamel hypocalcification or significant calcium deficiency
- Root resorption
- Signs or symptoms of temporomandibular joint dysfunction
- Angle Class III molar relationship
- Craniofacial syndromes
- Cleft lip and/or palate
- Known allergy to acrylic materials or metal alloys
- Inability to maintain adequate oral hygiene during treatment
- Lack of cooperation during treatment
- Repeated appliance breakage or dislodgement (three or more times)
Studijní plán
Tato část poskytuje podrobnosti o studijním plánu, včetně toho, jak je studie navržena a co studie měří.
Jak je studie koncipována?
Detaily designu
- Primární účel: Léčba
- Přidělení: Randomizované
- Intervenční model: Paralelní přiřazení
- Maskování: Singl
Zbraně a zásahy
Skupina účastníků / Arm |
Intervence / Léčba |
|---|---|
|
Experimentální: Laboratory-fabricated rapid maxillary expansion appliance
Participants are treated with a laboratory-fabricated rapid maxillary expansion (RME) appliance produced on a dental cast obtained from conventional impressions.
The arms of the palatal expansion screw are adapted and soldered to orthodontic molar bands on the cast model.
Following adaptation, acrylic resin is added in the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated on a dental cast obtained from conventional impressions.
The expansion screw arms are adapted and soldered to orthodontic molar bands on the cast.
Ostatní jména:
|
|
Experimentální: 3D-printed rapid maxillary expansion appliance
Participants are treated with a rapid maxillary expansion (RME) appliance fabricated using digital intraoral scans.
Dental models are generated from intraoral scan data, and the appliance framework, including the arms and tooth-supporting components, is manufactured as a single-piece structure using three-dimensional (3D) metal printing technology with sintered cobalt-chromium alloy.
After fabrication, acrylic resin is added to the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated using digital intraoral scan data.
Dental models are generated from intraoral scans, and the appliance framework is manufactured as a single-piece structure using three-dimensional (3D) metal printing with sintered cobalt-chromium alloy.
Ostatní jména:
|
Co je měření studie?
Primární výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
Change in maxillary transverse skeletal width and intermolar width from T0 to T2
Časové okno: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
The primary outcome is the difference in transverse skeletal maxillary width and maxillary intermolar width between baseline (T0) and the end of the 3-month retention period (T2).
Skeletal measurements will be obtained from standardized posteroanterior cephalometric radiographs, and dental measurements will be obtained from digital model analysis.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Sekundární výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
Wong-Baker FACES Pain Rating Scale score
Časové okno: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Pain perception will be assessed using the Wong-Baker FACES Pain Rating Scale at predefined time points during treatment.
Scores will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Child Perceptions Questionnaire (CPQ 8-10)
Časové okno: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral health-related quality of life will be assessed using the validated Child Perceptions Questionnaire (CPQ 8-10).
Total and domain scores (oral symptoms, functional limitations, emotional well-being, social well-being) will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Modified Silness-Löe Plaque Index score
Časové okno: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral hygiene status will be evaluated using the Modified Silness-Löe Plaque Index at predefined time points during treatment to monitor plaque accumulation and compare oral hygiene changes between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Další výstupní opatření
Měření výsledku |
Popis opatření |
Časové okno |
|---|---|---|
|
3D digital model superimposition-based surface deviation
Časové okno: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Digital models obtained at T0 and T2 will be superimposed using the medial two-thirds of the third palatal rugae and the posterior palatal vault as stable reference areas.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Spolupracovníci a vyšetřovatelé
Zde najdete lidi a organizace zapojené do této studie.
Sponzor
Vyšetřovatelé
- Studijní židle: Habibe Sinem Ince Bingol, DDS, Orthodontist, Hacettepe Unversity, Faculty of Dentistry, Department of Orthodontics
- Vrchní vyšetřovatel: Sinem Tekdemir, DDS, Baskent University, Faculty of Dentistry, Department of Orthodontics
Termíny studijních záznamů
Tato data sledují průběh záznamů studie a předkládání souhrnných výsledků na ClinicalTrials.gov. Záznamy ze studií a hlášené výsledky jsou před zveřejněním na veřejné webové stránce přezkoumány Národní lékařskou knihovnou (NLM), aby se ujistily, že splňují specifické standardy kontroly kvality.
Hlavní termíny studia
Začátek studia (Aktuální)
7. srpna 2025
Primární dokončení (Odhadovaný)
1. července 2026
Dokončení studie (Odhadovaný)
1. září 2026
Termíny zápisu do studia
První předloženo
23. února 2026
První předloženo, které splnilo kritéria kontroly kvality
14. května 2026
První zveřejněno (Aktuální)
20. května 2026
Aktualizace studijních záznamů
Poslední zveřejněná aktualizace (Aktuální)
20. května 2026
Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality
14. května 2026
Naposledy ověřeno
1. května 2026
Více informací
Termíny související s touto studií
Klíčová slova
Další identifikační čísla studie
- D-KA24/41
- 2025-066 (Jiný identifikátor: Turkish Medicines and Medical Devices Agency Clinical Trial Authorization Number)
- 25/31 (Jiný identifikátor: Baskent University Institutional Ethics Committee Approval Number)
Plán pro data jednotlivých účastníků (IPD)
Plánujete sdílet data jednotlivých účastníků (IPD)?
NE
Popis plánu IPD
Individual participant data (IPD) will not be shared due to institutional policies, ethical committee regulations, and patient confidentiality considerations.
Informace o lécích a zařízeních, studijní dokumenty
Studuje lékový produkt regulovaný americkým FDA
Ne
Studuje produkt zařízení regulovaný americkým úřadem FDA
Ne
Tyto informace byly beze změn načteny přímo z webu clinicaltrials.gov. Máte-li jakékoli požadavky na změnu, odstranění nebo aktualizaci podrobností studie, kontaktujte prosím register@clinicaltrials.gov. Jakmile bude změna implementována na clinicaltrials.gov, bude automaticky aktualizována i na našem webu .