Comparison of Laboratory-Fabricated and 3D-Printed Rapid Maxillary Expansion Appliances
3 de septiembre de 2026 actualizado por: Baskent University
Comparison of the Skeletal and Dentoalveolar Effects and Patient Comfort of Conventional and 3D-Printed Maxillary Expansion Appliances in Mixed Dentition Patients
The goal of this clinical trial is to determine whether two types of rapid maxillary expansion (RME) appliances produce different outcomes in children. RME is a treatment utilized to expand a narrow upper jaw. This study will include children aged 8 to 10 years who need upper jaw expansion during the mixed dentition period (when they have both temporary and permanent teeth).
The main questions this study aims to answer are:
- Do 3D-printed expansion appliances produce different skeletal and dental changes compared to conventionally fabricated appliances?
- Do children feel more comfortable with one type of appliance?
- Is there a difference in pain levels or oral hygiene between the two groups?
Researchers aimed to compare a conventionally fabricated expansion appliance manufactured in a dental laboratory with a 3D-printed expansion appliance produced digitally to determine whether the method of production affects treatment outcomes and patient comfort.
Participants:
- Being treated with one of the two expansion appliances (assigned randomly)
- Follow a standard activation protocol at home with parental guidance
- Attend regular clinic visits during expansion and retention phases
- Have dental photographs, X-rays, and digital scans taken before and after treatment
- Complete an oral health-related quality of life questionnaire
- Rate their pain using a pain scale
- Have their oral hygiene measured
Descripción general del estudio
Estado
Activo, no reclutando
Condiciones
Descripción detallada
Treatment effectiveness, amount of expansion, and patient comfort will be evaluated between the two groups. Additionally, the impact of digital appliance production on treatment outcomes and patient satisfaction will be investigated.
This prospective, parallel-group, randomized clinical trial aims to compare the skeletal, dentoalveolar, and patient-reported effects of conventionally fabricated and three-dimensional (3D) printed rapid maxillary expansion (RME) appliances in children with transverse maxillary deficiency during the mixed dentition period.
Participants aged 8-10 years who meet the predefined inclusion criteria and require rapid maxillary expansion as part of their orthodontic treatment will be enrolled.
The results are expected to contribute evidence-based guidance for orthodontists when selecting appliance fabrication methods, balancing biological effectiveness with patient comfort and quality-of-life considerations.
Findings from this study may also support future digital workflow integration strategies in pediatric orthodontic treatment planning.
Tipo de estudio
Intervencionista
Inscripción (Actual)
48
Fase
- No aplica
Contactos y Ubicaciones
Esta sección proporciona los datos de contacto de quienes realizan el estudio e información sobre dónde se lleva a cabo este estudio.
Ubicaciones de estudio
-
-
-
Ankara, Turquía (Türkiye), 06490
- Baskent University Faculty of Dentistry, Department of Orthodontics
-
-
Criterios de participación
Los investigadores buscan personas que se ajusten a una determinada descripción, denominada criterio de elegibilidad. Algunos ejemplos de estos criterios son el estado de salud general de una persona o tratamientos previos.
Criterio de elegibilidad
Edades elegibles para estudiar
- Niño
Acepta Voluntarios Saludables
No
Descripción
Inclusion Criteria:
- Children aged between 7 and 11 years
- In the mixed dentition period
- Fully erupted permanent first molars
- Presence of primary canines and primary second molars suitable for use as anchorage units for at least 6 months
- Angle Class I or Class II molar relationship
- Presence of posterior crossbite and/or moderate maxillary transverse deficiency or moderate crowding
- Prepubertal growth stage corresponding to Cervical Vertebral Maturation Stage 1 (CVM1) or Stage 2 (CVM2)
- Receiving orthodontic treatment at the Başkent University Department of Orthodontics
- Parents or legal guardians willing to provide written informed consent
Exclusion Criteria:
- Previous orthodontic treatment
- Periodontal disease
- Enamel hypocalcification or significant calcium deficiency
- Root resorption
- Signs or symptoms of temporomandibular joint dysfunction
- Angle Class III molar relationship
- Craniofacial syndromes
- Cleft lip and/or palate
- Known allergy to acrylic materials or metal alloys
- Inability to maintain adequate oral hygiene during treatment
- Lack of cooperation during treatment
- Repeated appliance breakage or dislodgement (three or more times)
Plan de estudios
Esta sección proporciona detalles del plan de estudio, incluido cómo está diseñado el estudio y qué mide el estudio.
¿Cómo está diseñado el estudio?
Detalles de diseño
- Propósito principal: Tratamiento
- Asignación: Aleatorizado
- Modelo Intervencionista: Asignación paralela
- Enmascaramiento: Único
Armas e Intervenciones
Grupo de participantes/brazo |
Intervención / Tratamiento |
|---|---|
|
Experimental: Laboratory-fabricated rapid maxillary expansion appliance
Participants are treated with a laboratory-fabricated rapid maxillary expansion (RME) appliance produced on a dental cast obtained from conventional impressions.
The arms of the palatal expansion screw are adapted and soldered to orthodontic molar bands on the cast model.
Following adaptation, acrylic resin is added in the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated on a dental cast obtained from conventional impressions.
The expansion screw arms are adapted and soldered to orthodontic molar bands on the cast.
Otros nombres:
|
|
Experimental: 3D-printed rapid maxillary expansion appliance
Participants are treated with a rapid maxillary expansion (RME) appliance fabricated using digital intraoral scans.
Dental models are generated from intraoral scan data, and the appliance framework, including the arms and tooth-supporting components, is manufactured as a single-piece structure using three-dimensional (3D) metal printing technology with sintered cobalt-chromium alloy.
After fabrication, acrylic resin is added to the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated using digital intraoral scan data.
Dental models are generated from intraoral scans, and the appliance framework is manufactured as a single-piece structure using three-dimensional (3D) metal printing with sintered cobalt-chromium alloy.
Otros nombres:
|
¿Qué mide el estudio?
Medidas de resultado primarias
Medida de resultado |
Medida Descripción |
Periodo de tiempo |
|---|---|---|
|
Change in maxillary transverse skeletal width and intermolar width from T0 to T2
Periodo de tiempo: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
The primary outcome is the difference in transverse skeletal maxillary width and maxillary intermolar width between baseline (T0) and the end of the 3-month retention period (T2).
Skeletal measurements will be obtained from standardized posteroanterior cephalometric radiographs, and dental measurements will be obtained from digital model analysis.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Medidas de resultado secundarias
Medida de resultado |
Medida Descripción |
Periodo de tiempo |
|---|---|---|
|
Wong-Baker FACES Pain Rating Scale score
Periodo de tiempo: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Pain perception will be assessed using the Wong-Baker FACES Pain Rating Scale at predefined time points during treatment.
Scores will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Child Perceptions Questionnaire (CPQ 8-10)
Periodo de tiempo: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral health-related quality of life will be assessed using the validated Child Perceptions Questionnaire (CPQ 8-10).
Total and domain scores (oral symptoms, functional limitations, emotional well-being, social well-being) will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Modified Silness-Löe Plaque Index score
Periodo de tiempo: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral hygiene status will be evaluated using the Modified Silness-Löe Plaque Index at predefined time points during treatment to monitor plaque accumulation and compare oral hygiene changes between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Otras medidas de resultado
Medida de resultado |
Medida Descripción |
Periodo de tiempo |
|---|---|---|
|
3D digital model superimposition-based surface deviation
Periodo de tiempo: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Digital models obtained at T0 and T2 will be superimposed using the medial two-thirds of the third palatal rugae and the posterior palatal vault as stable reference areas.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Colaboradores e Investigadores
Aquí es donde encontrará personas y organizaciones involucradas en este estudio.
Patrocinador
Investigadores
- Silla de estudio: Habibe Sinem Ince Bingol, DDS, Orthodontist, Hacettepe Unversity, Faculty of Dentistry, Department of Orthodontics
- Investigador principal: Sinem Tekdemir, DDS, Baskent University, Faculty of Dentistry, Department of Orthodontics
Fechas de registro del estudio
Estas fechas rastrean el progreso del registro del estudio y los envíos de resultados resumidos a ClinicalTrials.gov. Los registros del estudio y los resultados informados son revisados por la Biblioteca Nacional de Medicina (NLM) para asegurarse de que cumplan con los estándares de control de calidad específicos antes de publicarlos en el sitio web público.
Fechas importantes del estudio
Inicio del estudio (Actual)
7 de agosto de 2025
Finalización primaria (Actual)
31 de julio de 2026
Finalización del estudio (Estimado)
1 de diciembre de 2026
Fechas de registro del estudio
Enviado por primera vez
23 de febrero de 2026
Primero enviado que cumplió con los criterios de control de calidad
14 de mayo de 2026
Publicado por primera vez (Actual)
20 de mayo de 2026
Actualizaciones de registros de estudio
Última actualización publicada (Actual)
4 de septiembre de 2026
Última actualización enviada que cumplió con los criterios de control de calidad
3 de septiembre de 2026
Última verificación
1 de septiembre de 2026
Más información
Términos relacionados con este estudio
Palabras clave
Otros números de identificación del estudio
- D-KA24/41
- 2025-066 (Otro identificador: Turkish Medicines and Medical Devices Agency Clinical Trial Authorization Number)
- 25/31 (Otro identificador: Baskent University Institutional Ethics Committee Approval Number)
Plan de datos de participantes individuales (IPD)
¿Planea compartir datos de participantes individuales (IPD)?
NO
Descripción del plan IPD
Individual participant data (IPD) will not be shared due to institutional policies, ethical committee regulations, and patient confidentiality considerations.
Información sobre medicamentos y dispositivos, documentos del estudio
Estudia un producto farmacéutico regulado por la FDA de EE. UU.
No
Estudia un producto de dispositivo regulado por la FDA de EE. UU.
No
Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .