Comparison of Laboratory-Fabricated and 3D-Printed Rapid Maxillary Expansion Appliances
3. september 2026 oppdatert av: Baskent University
Comparison of the Skeletal and Dentoalveolar Effects and Patient Comfort of Conventional and 3D-Printed Maxillary Expansion Appliances in Mixed Dentition Patients
The goal of this clinical trial is to determine whether two types of rapid maxillary expansion (RME) appliances produce different outcomes in children. RME is a treatment utilized to expand a narrow upper jaw. This study will include children aged 8 to 10 years who need upper jaw expansion during the mixed dentition period (when they have both temporary and permanent teeth).
The main questions this study aims to answer are:
- Do 3D-printed expansion appliances produce different skeletal and dental changes compared to conventionally fabricated appliances?
- Do children feel more comfortable with one type of appliance?
- Is there a difference in pain levels or oral hygiene between the two groups?
Researchers aimed to compare a conventionally fabricated expansion appliance manufactured in a dental laboratory with a 3D-printed expansion appliance produced digitally to determine whether the method of production affects treatment outcomes and patient comfort.
Participants:
- Being treated with one of the two expansion appliances (assigned randomly)
- Follow a standard activation protocol at home with parental guidance
- Attend regular clinic visits during expansion and retention phases
- Have dental photographs, X-rays, and digital scans taken before and after treatment
- Complete an oral health-related quality of life questionnaire
- Rate their pain using a pain scale
- Have their oral hygiene measured
Studieoversikt
Status
Aktiv, ikke rekrutterende
Forhold
Detaljert beskrivelse
Treatment effectiveness, amount of expansion, and patient comfort will be evaluated between the two groups. Additionally, the impact of digital appliance production on treatment outcomes and patient satisfaction will be investigated.
This prospective, parallel-group, randomized clinical trial aims to compare the skeletal, dentoalveolar, and patient-reported effects of conventionally fabricated and three-dimensional (3D) printed rapid maxillary expansion (RME) appliances in children with transverse maxillary deficiency during the mixed dentition period.
Participants aged 8-10 years who meet the predefined inclusion criteria and require rapid maxillary expansion as part of their orthodontic treatment will be enrolled.
The results are expected to contribute evidence-based guidance for orthodontists when selecting appliance fabrication methods, balancing biological effectiveness with patient comfort and quality-of-life considerations.
Findings from this study may also support future digital workflow integration strategies in pediatric orthodontic treatment planning.
Studietype
Intervensjonell
Registrering (Faktiske)
48
Fase
- Ikke aktuelt
Kontakter og plasseringer
Denne delen inneholder kontaktinformasjon for de som utfører studien, og informasjon om hvor denne studien blir utført.
Studiesteder
-
-
-
Ankara, Tyrkia (Türkiye), 06490
- Baskent University Faculty of Dentistry, Department of Orthodontics
-
-
Deltakelseskriterier
Forskere ser etter personer som passer til en bestemt beskrivelse, kalt kvalifikasjonskriterier. Noen eksempler på disse kriteriene er en persons generelle helsetilstand eller tidligere behandlinger.
Kvalifikasjonskriterier
Alder som er kvalifisert for studier
- Barn
Tar imot friske frivillige
Nei
Beskrivelse
Inclusion Criteria:
- Children aged between 7 and 11 years
- In the mixed dentition period
- Fully erupted permanent first molars
- Presence of primary canines and primary second molars suitable for use as anchorage units for at least 6 months
- Angle Class I or Class II molar relationship
- Presence of posterior crossbite and/or moderate maxillary transverse deficiency or moderate crowding
- Prepubertal growth stage corresponding to Cervical Vertebral Maturation Stage 1 (CVM1) or Stage 2 (CVM2)
- Receiving orthodontic treatment at the Başkent University Department of Orthodontics
- Parents or legal guardians willing to provide written informed consent
Exclusion Criteria:
- Previous orthodontic treatment
- Periodontal disease
- Enamel hypocalcification or significant calcium deficiency
- Root resorption
- Signs or symptoms of temporomandibular joint dysfunction
- Angle Class III molar relationship
- Craniofacial syndromes
- Cleft lip and/or palate
- Known allergy to acrylic materials or metal alloys
- Inability to maintain adequate oral hygiene during treatment
- Lack of cooperation during treatment
- Repeated appliance breakage or dislodgement (three or more times)
Studieplan
Denne delen gir detaljer om studieplanen, inkludert hvordan studien er utformet og hva studien måler.
Hvordan er studiet utformet?
Designdetaljer
- Primært formål: Behandling
- Tildeling: Randomisert
- Intervensjonsmodell: Parallell tildeling
- Masking: Enkelt
Våpen og intervensjoner
Deltakergruppe / Arm |
Intervensjon / Behandling |
|---|---|
|
Eksperimentell: Laboratory-fabricated rapid maxillary expansion appliance
Participants are treated with a laboratory-fabricated rapid maxillary expansion (RME) appliance produced on a dental cast obtained from conventional impressions.
The arms of the palatal expansion screw are adapted and soldered to orthodontic molar bands on the cast model.
Following adaptation, acrylic resin is added in the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated on a dental cast obtained from conventional impressions.
The expansion screw arms are adapted and soldered to orthodontic molar bands on the cast.
Andre navn:
|
|
Eksperimentell: 3D-printed rapid maxillary expansion appliance
Participants are treated with a rapid maxillary expansion (RME) appliance fabricated using digital intraoral scans.
Dental models are generated from intraoral scan data, and the appliance framework, including the arms and tooth-supporting components, is manufactured as a single-piece structure using three-dimensional (3D) metal printing technology with sintered cobalt-chromium alloy.
After fabrication, acrylic resin is added to the palatal region to increase the force distribution area.
The appliance is cemented to the teeth using glass ionomer cement.
Activation and retention protocols are standardized across both groups.
|
A rapid maxillary expansion (RME) appliance fabricated using digital intraoral scan data.
Dental models are generated from intraoral scans, and the appliance framework is manufactured as a single-piece structure using three-dimensional (3D) metal printing with sintered cobalt-chromium alloy.
Andre navn:
|
Hva måler studien?
Primære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Change in maxillary transverse skeletal width and intermolar width from T0 to T2
Tidsramme: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
The primary outcome is the difference in transverse skeletal maxillary width and maxillary intermolar width between baseline (T0) and the end of the 3-month retention period (T2).
Skeletal measurements will be obtained from standardized posteroanterior cephalometric radiographs, and dental measurements will be obtained from digital model analysis.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Sekundære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Wong-Baker FACES Pain Rating Scale score
Tidsramme: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Pain perception will be assessed using the Wong-Baker FACES Pain Rating Scale at predefined time points during treatment.
Scores will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Child Perceptions Questionnaire (CPQ 8-10)
Tidsramme: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral health-related quality of life will be assessed using the validated Child Perceptions Questionnaire (CPQ 8-10).
Total and domain scores (oral symptoms, functional limitations, emotional well-being, social well-being) will be recorded and compared between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
|
Modified Silness-Löe Plaque Index score
Tidsramme: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Oral hygiene status will be evaluated using the Modified Silness-Löe Plaque Index at predefined time points during treatment to monitor plaque accumulation and compare oral hygiene changes between groups.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Andre resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
3D digital model superimposition-based surface deviation
Tidsramme: -Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Digital models obtained at T0 and T2 will be superimposed using the medial two-thirds of the third palatal rugae and the posterior palatal vault as stable reference areas.
|
-Preoperative (T0) -After appliance cementation (within 2 weeks) -1 week after the cementation -End of active expansion (approximately 6-8 weeks after cementation) (T1) -End of the 3 months retention period after T1, prior to appliance removal (T2)
|
Samarbeidspartnere og etterforskere
Det er her du vil finne personer og organisasjoner som er involvert i denne studien.
Sponsor
Etterforskere
- Studiestol: Habibe Sinem Ince Bingol, DDS, Orthodontist, Hacettepe Unversity, Faculty of Dentistry, Department of Orthodontics
- Hovedetterforsker: Sinem Tekdemir, DDS, Baskent University, Faculty of Dentistry, Department of Orthodontics
Studierekorddatoer
Disse datoene sporer fremdriften for innsending av studieposter og sammendragsresultater til ClinicalTrials.gov. Studieposter og rapporterte resultater gjennomgås av National Library of Medicine (NLM) for å sikre at de oppfyller spesifikke kvalitetskontrollstandarder før de legges ut på det offentlige nettstedet.
Studer hoveddatoer
Studiestart (Faktiske)
7. august 2025
Primær fullføring (Faktiske)
31. juli 2026
Studiet fullført (Antatt)
1. desember 2026
Datoer for studieregistrering
Først innsendt
23. februar 2026
Først innsendt som oppfylte QC-kriteriene
14. mai 2026
Først lagt ut (Faktiske)
20. mai 2026
Oppdateringer av studieposter
Sist oppdatering lagt ut (Faktiske)
4. september 2026
Siste oppdatering sendt inn som oppfylte QC-kriteriene
3. september 2026
Sist bekreftet
1. september 2026
Mer informasjon
Begreper knyttet til denne studien
Nøkkelord
Andre studie-ID-numre
- D-KA24/41
- 2025-066 (Annen identifikator: Turkish Medicines and Medical Devices Agency Clinical Trial Authorization Number)
- 25/31 (Annen identifikator: Baskent University Institutional Ethics Committee Approval Number)
Plan for individuelle deltakerdata (IPD)
Planlegger du å dele individuelle deltakerdata (IPD)?
NEI
IPD-planbeskrivelse
Individual participant data (IPD) will not be shared due to institutional policies, ethical committee regulations, and patient confidentiality considerations.
Legemiddel- og utstyrsinformasjon, studiedokumenter
Studerer et amerikansk FDA-regulert medikamentprodukt
Nei
Studerer et amerikansk FDA-regulert enhetsprodukt
Nei
Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .