- ICH GCP
- Register voor klinische proeven in de VS.
- Klinische proef NCT07799558
Guided Biofilm Therapy Versus Conventional Polishing for Tooth Re-Staining
Guided Biofilm Therapy Versus Conventional Polishing for Extrinsic Tooth Re-Staining, Patient Comfort, and Procedure Time: A Randomized Split-Mouth Trial
This study compared Guided Biofilm Therapy with conventional polishing in adults with visible extrinsic tooth staining. Each participant received Guided Biofilm Therapy on one side of the mouth and conventional polishing on the other side.
The study evaluated whether the two methods differed in the amount of tooth re-staining after treatment, patient discomfort during the procedures, and total procedure time. Tooth color was measured with a spectrophotometer immediately after treatment, at 1 month, and at 2 months. Patient discomfort was recorded using a visual analog scale, and procedure time was measured with a stopwatch.
A total of 34 participants completed the study.
Studie Overzicht
Toestand
Conditie
Interventie / Behandeling
Gedetailleerde beschrijving
This randomized split-mouth clinical trial was conducted in adults with visible extrinsic tooth staining. The aim was to compare Guided Biofilm Therapy (GBT) with conventional polishing in terms of post-procedural extrinsic tooth re-staining, patient discomfort, and procedure time.
Each participant received both interventions. One side of the mouth was assigned to GBT and the contralateral side to conventional polishing. The right-left allocation of the interventions was determined by randomization, with the two allocation sequences equally distributed among participants.
In the GBT intervention, dental biofilm was first disclosed and then removed using an air-water-powder system with a low-abrasive erythritol-based powder. Supragingival ultrasonic instrumentation was performed where necessary. In the conventional polishing intervention, supragingival instrumentation was followed by mechanical polishing with a brush and polishing paste.
Tooth color was assessed using a SpectroShade Micro spectrophotometer and the CIELAB color system. Measurements were performed immediately after treatment at baseline (T0), at 1 month (T1), and at 2 months (T2). Color change between assessment periods was calculated using ΔE*ab values.
Patient-reported discomfort was assessed immediately after each half-mouth procedure using a visual analog scale. Total procedure time for each intervention was recorded with a stopwatch.
The primary outcome was color change from immediately after treatment to 2 months. Secondary outcomes included color change from immediately after treatment to 1 month, color change from 1 month to 2 months, patient discomfort, and procedure time.
A total of 34 participants completed all study visits and follow-up assessments.
Studietype
Inschrijving (Werkelijk)
Fase
- Niet toepasbaar
Contacten en locaties
Studie Locaties
-
-
Erzurum
-
Erzurum, Erzurum, Turkije (Türkiye), 25080
- Ataturk University
-
-
Deelname Criteria
Geschiktheidscriteria
Leeftijden die in aanmerking komen voor studie
- Volwassen
- Oudere volwassene
Accepteert gezonde vrijwilligers
Beschrijving
Inclusion Criteria:
- Age over 18 years.
- Willingness to participate in the study and provision of written informed consent.
- Good general health with no systemic disease.
- Clinical presence of extrinsic staining on tooth surfaces at a level warranting professional polishing.
- Right-handed tooth brushing.
- No professional dental cleaning within the previous 6 months.
Exclusion Criteria:
- Age under 18 years.
- Diagnosis of periodontitis.
- Current smoking.
- Antibiotic use within the previous 3 months.
- Presence of acute periodontal disease.
- Allergy to polishing powders, specifically erythritol.
- Presence of a communicable disease.
- Teeth to be measured with restorations, caries, excessive wear, or structural defects that could affect measurement.
- Active orthodontic treatment.
- Developmental or structural anomalies affecting enamel and potentially increasing susceptibility to extrinsic staining, including hypomineralization, amelogenesis imperfecta, or dentinogenesis imperfecta.
- Severe dental crowding preventing standardized measurements.
Studie plan
Hoe is de studie opgezet?
Ontwerpdetails
- Primair doel: Preventie
- Toewijzing: Gerandomiseerd
- Interventioneel model: Crossover-opdracht
- Masker: Enkel
Wapens en interventies
Deelnemersgroep / Arm |
Interventie / Behandeling |
|---|---|
|
Experimenteel: Sequence A: Right GBT / Left Conventional Polishing
Participants assigned to Sequence A received Guided Biofilm Therapy on the right half of the mouth and conventional polishing on the left half of the mouth.
Both interventions were performed within the split-mouth study design.
|
Dental biofilm was first disclosed to guide treatment.
Supragingival biofilm and extrinsic staining were then removed using an air-water-powder system with a low-abrasive erythritol-based powder.
Supragingival ultrasonic instrumentation was performed where necessary, followed by final surface control.
Andere namen:
Supragingival instrumentation was performed as needed, followed by mechanical polishing with a prophylaxis brush and polishing paste at 2500 to 3000 rpm.
The procedure was completed with final surface control.
Andere namen:
|
|
Experimenteel: Sequence B: Right Conventional Polishing / Left GBT
Participants assigned to Sequence B received conventional polishing on the right half of the mouth and Guided Biofilm Therapy on the left half of the mouth.
Both interventions were performed within the split-mouth study design.
|
Dental biofilm was first disclosed to guide treatment.
Supragingival biofilm and extrinsic staining were then removed using an air-water-powder system with a low-abrasive erythritol-based powder.
Supragingival ultrasonic instrumentation was performed where necessary, followed by final surface control.
Andere namen:
Supragingival instrumentation was performed as needed, followed by mechanical polishing with a prophylaxis brush and polishing paste at 2500 to 3000 rpm.
The procedure was completed with final surface control.
Andere namen:
|
Wat meet het onderzoek?
Primaire uitkomstmaten
Uitkomstmaat |
Maatregel Beschrijving |
Tijdsspanne |
|---|---|---|
|
Change in Tooth Color From Immediately After Treatment to 2 Months Assessed by CIELAB ΔE*ab Using a SpectroShade Micro Spectrophotometer
Tijdsspanne: Immediately after treatment (Day 1) and at 2 months
|
Tooth color was measured using a SpectroShade Micro spectrophotometer according to the CIELAB color system.
Color change between immediately after treatment (T0) and 2 months (T2) was calculated as ΔEab using the formula: ΔEab = [(ΔL*)² + (Δa*)² + (Δb*)²]^(1/2).
ΔEab is a continuous color-difference measure, with 0 indicating no color difference and higher values indicating greater color change.
Therefore, lower ΔEab values indicate greater color stability.
|
Immediately after treatment (Day 1) and at 2 months
|
Secundaire uitkomstmaten
Uitkomstmaat |
Maatregel Beschrijving |
Tijdsspanne |
|---|---|---|
|
Change in Tooth Color From Immediately After Treatment to 1 Month Assessed by CIELAB ΔE*ab Using a SpectroShade Micro Spectrophotometer
Tijdsspanne: Immediately after treatment (Day 1) and at 1 month
|
Tooth color was measured using a SpectroShade Micro spectrophotometer according to the CIELAB color system.
Color change between immediately after treatment (T0) and 1 month (T1) was calculated as ΔEab using the formula: ΔEab = [(ΔL*)² + (Δa*)² + (Δb*)²]^(1/2).
ΔEab is a continuous color-difference measure, with 0 indicating no color difference and higher values indicating greater color change.
Therefore, lower ΔEab values indicate greater color stability.
|
Immediately after treatment (Day 1) and at 1 month
|
|
Change in Tooth Color From 1 Month to 2 Months
Tijdsspanne: At 1 month and 2 months
|
Tooth color was measured using a SpectroShade Micro spectrophotometer according to the CIELAB color system.
Color change between 1 month (M1) and 2 months (M2) was calculated as ΔE*ab using the formula: ΔE*ab = [(ΔL*)² + (Δa*)² + (Δb*)²]^(1/2).
Lower ΔE*ab values indicate less color change.
|
At 1 month and 2 months
|
|
Patient-Reported Discomfort Assessed Using a 10-cm Visual Analog Scale
Tijdsspanne: Immediately after completion of each half-mouth intervention (Day 1)
|
Patient-reported discomfort was assessed immediately after each half-mouth procedure using a 10-cm visual analog scale ranging from 0 to 10, where 0 indicated no discomfort and 10 indicated unbearable discomfort.
The score reflected the overall perception of pain or sensitivity, heat, pressure or vibration, and discomfort related to water spray or aerosol.
Lower scores indicate greater patient comfort.
|
Immediately after completion of each half-mouth intervention (Day 1)
|
|
Total Procedure Time Measured Using a Digital Stopwatch
Tijdsspanne: Periprocedural
|
Total procedure time for each intervention was recorded using a digital stopwatch.
Timing began with the first clinical step of the relevant intervention and ended after completion of the final surface check.
Patient preparation, isolation, and oral hygiene instruction were excluded.
Procedure time was recorded in minutes and seconds, with shorter times indicating greater procedural efficiency.
|
Periprocedural
|
Medewerkers en onderzoekers
Sponsor
Onderzoekers
- Studie directeur: Recep Orbak, DDS, PhD, Ataturk University
Studie record data
Bestudeer belangrijke data
Studie start (Werkelijk)
Primaire voltooiing (Werkelijk)
Studie voltooiing (Werkelijk)
Studieregistratiedata
Eerst ingediend
Eerst ingediend dat voldeed aan de QC-criteria
Eerst geplaatst (Werkelijk)
Updates van studierecords
Laatste update geplaatst (Werkelijk)
Laatste update ingediend die voldeed aan QC-criteria
Laatst geverifieerd
Meer informatie
Termen gerelateerd aan deze studie
Trefwoorden
Aanvullende relevante MeSH-voorwaarden
Andere studie-ID-nummers
- 926
Plan Individuele Deelnemersgegevens (IPD)
Bent u van plan om gegevens van individuele deelnemers (IPD) te delen?
Beschrijving IPD-plan
IPD-tijdsbestek voor delen
IPD-toegangscriteria voor delen
IPD delen Ondersteunend informatietype
- LEERPROTOCOOL
Informatie over medicijnen en apparaten, studiedocumenten
Bestudeert een door de Amerikaanse FDA gereguleerd geneesmiddel
Bestudeert een door de Amerikaanse FDA gereguleerd apparaatproduct
product vervaardigd in en geëxporteerd uit de V.S.
Deze informatie is zonder wijzigingen rechtstreeks van de website clinicaltrials.gov gehaald. Als u verzoeken heeft om uw onderzoeksgegevens te wijzigen, te verwijderen of bij te werken, neem dan contact op met register@clinicaltrials.gov. Zodra er een wijziging wordt doorgevoerd op clinicaltrials.gov, wordt deze ook automatisch bijgewerkt op onze website .