Effectiveness of Clear Aligner Systems in Mixed Dentition Maxillary Transverse Deficiency
10 maja 2026 zaktualizowane przez: Celal Irgin, TC Erciyes University
Comparison of the Effectiveness of Different Clear Aligner Systems in Patients With Maxillary Transverse Deficiency During the Mixed Dentition Period: An In-Vivo Randomized Controlled Clinical Trial
he primary aim of this study is to compare the dentoalveolar and skeletal effects of arch expansion using an in-house clear aligner system, produced chairside with an indirect manufacturing technique, and commercially available clear aligner systems (Invisalign) in patients during the mixed dentition period.
Participants will be allocated into five groups: Group A-In-house aligners (5-day activation protocol), Group B-In-house aligners (2-day activation protocol), Group C-Invisalign First aligners, Group D-Invisalign Palatal Expander, and Group E-untreated control group.
Before treatment, demographic data, dental models, intraoral and extraoral photographs, radiographic images, and clinical measurements will be collected. Skeletal measurements, including maxillary and nasal widths, will be evaluated using posteroanterior cephalometric radiographs. Digital models of the maxilla and mandible will be obtained using an intraoral scanner and used for dental measurements before and after treatment.
Secondary outcomes include evaluation of facial soft tissue changes using stereophotogrammetry (3DMD), assessment of white spot lesions using quantitative light-induced fluorescence (QLF), and analysis of patient compliance using the Orthodontic Patient Cooperation Scale. In addition, changes in body mass index (BMI), maxillary-mandibular transverse discrepancies, and appliance wear time will be evaluated.
Przegląd badań
Status
Aktywny, nie rekrutujący
Warunki
Typ studiów
Interwencyjne
Zapisy (Rzeczywisty)
75
Faza
- Nie dotyczy
Kontakty i lokalizacje
Ta sekcja zawiera dane kontaktowe osób prowadzących badanie oraz informacje o tym, gdzie badanie jest przeprowadzane.
Lokalizacje studiów
-
-
Kayseri
-
Talas, Kayseri, Turcja (Türkiye), 38039
- Erciyes University Faculty of Dentistry
-
-
Kryteria uczestnictwa
Badacze szukają osób, które pasują do określonego opisu, zwanego kryteriami kwalifikacyjnymi. Niektóre przykłady tych kryteriów to ogólny stan zdrowia danej osoby lub wcześniejsze leczenie.
Kryteria kwalifikacji
Wiek uprawniający do nauki
- Dziecko
Akceptuje zdrowych ochotników
Nie
Opis
Inclusion Criteria:
- Patients in the early mixed dentition period;
- Maxillary intermolar width ≤ 31 mm;
- Presence of at least 5 mm transverse discrepancy between the maxillary and mandibular arches;
- Normal vertical growth pattern (Sn-GoGn: 32 ± 6°);
- Eruption of permanent first molars and central incisors;
- Presence of at least two primary posterior teeth in each quadrant;
- Posterior teeth with a clinical crown height of at least 4 mm;
- Patients aged between 7 and 10 years;
- Absence of any craniofacial anomalies;
- Good oral hygiene status; Healthy periodontal tissues.
Exclusion Criteria:
- Patients with the loss of more than one primary tooth
- Presence of stainless steel crowns on the maxillary permanent first molars, primary first molars, or primary second molars
- Patients with systemic or syndromic conditions
- Presence of palatal exostoses or morphological anomalies of the palatal surface
- Presence of active temporomandibular joint disorders
- Children with poor compliance
- History of allergy to any dental material
- Patients with multiple and/or advanced caries, tooth agenesis, or supernumerary teeth
- Patients with skeletal asymmetry
Plan studiów
Ta sekcja zawiera szczegółowe informacje na temat planu badania, w tym sposób zaprojektowania badania i jego pomiary.
Jak projektuje się badanie?
Szczegóły projektu
- Główny cel: Leczenie
- Przydział: Randomizowane
- Model interwencyjny: Przydział równoległy
- Maskowanie: Pojedynczy
Broń i interwencje
Grupa uczestników / Arm |
Interwencja / Leczenie |
|---|---|
|
Brak interwencji: Grupa kontrolna
|
|
|
Eksperymentalny: Invisalign Palatal Expander
|
In patients treated with the Invisalign Palatal Expander (IPE) (Align Technology, Santa Clara, CA), three-dimensional digital models were obtained using an intraoral scanner (iTero Lumina™, Align Technology).
Individualized maxillary expansion amounts were prescribed based on clinical objectives.
Unlike conventional aligner therapy, the IPE system does not involve full digital treatment simulation; expansion was defined by the planned transverse increase.
Following approval, customized IPE appliance sets were manufactured and delivered.
Patients were instructed to wear the appliance full-time, including during meals, removing it only for oral hygiene procedures.
The activation protocol consisted of appliance changes every 2 days, providing 0.25 mm transverse expansion per stage.
After completion of expansion, retention was achieved using Invisalign Palatal Holder appliances fabricated from new digital scans.
|
|
Eksperymentalny: In-House Aligner (2-Day Protocol)
|
In-house clear aligners were fabricated using a fully digital workflow.
Digital impressions were obtained with an intraoral scanner (3Shape TRIOS), and maxillary models were processed in CAD software for segmentation and attachment planning.
Buccal retention attachments were placed on primary canines, primary molars, and permanent first molars.
Maxillary models were digitally expanded in 0.2 mm increments per stage, generating sequential STL files.
Models were 3D-printed and thermoformed to fabricate aligners, which were then trimmed, polished, and labeled.
Patients received five aligners at each visit and were instructed to change them every 2 days.
Follow-up visits were scheduled at 10-day intervals.
At each visit, treatment progress was assessed, and the next series of aligners was provided.
|
|
Eksperymentalny: In-House Aligner (5-Day Protocol)
|
In-house clear aligners were fabricated using a fully digital workflow.
Digital impressions were obtained with an intraoral scanner (3Shape TRIOS), and maxillary models were processed in CAD software for segmentation and attachment planning.
Buccal retention attachments were placed on primary canines, primary molars, and permanent first molars to enhance retention and support transverse expansion.
Models were digitally expanded in 0.2 mm increments per stage and converted into sequential STL files.
These models were 3D-printed (Asiga MAX UV) and thermoformed (MINISTAR S) to produce aligners.
The appliances were trimmed, polished, and labeled with sequence numbers.
Patients received five aligners per visit and were instructed to change them every 5 days.
Follow-up visits were scheduled at 25-day intervals, during which treatment progress was evaluated and new aligners were delivered.
|
|
Aktywny komparator: Invisalign First Aligner
|
In patients treated with Invisalign First (Align Technology, Santa Clara, CA), three-dimensional digital models were obtained using an intraoral scanner (3Shape TRIOS).
Intraoral, extraoral photographs and radiographs were collected and uploaded to the ClinCheck digital treatment planning platform.
Individualized treatment objectives were defined, and expansion was planned without concurrent tooth movement to isolate maxillary transverse effects.
After achieving the desired expansion, comprehensive orthodontic treatment was continued.
Virtual treatment plans were reviewed and revised when necessary before approval.
Attachments were placed on posterior teeth to enhance retention and support expansion.
Enamel surfaces were etched, bonded, and light-cured using standard orthodontic protocols.
Patients were instructed to wear aligners 20-22 hours daily,and aligners were replaced every 5 days.
|
Co mierzy badanie?
Podstawowe miary wyniku
Miara wyniku |
Ramy czasowe |
|---|---|
|
Maxillary Transverse Dentoalveolar Dimension
Ramy czasowe: 20 weeks
|
20 weeks
|
Miary wyników drugorzędnych
Miara wyniku |
Ramy czasowe |
|---|---|
|
White spot lesion incidence
Ramy czasowe: 20 weeks
|
20 weeks
|
Współpracownicy i badacze
Tutaj znajdziesz osoby i organizacje zaangażowane w to badanie.
Sponsor
Daty zapisu na studia
Daty te śledzą postęp w przesyłaniu rekordów badań i podsumowań wyników do ClinicalTrials.gov. Zapisy badań i zgłoszone wyniki są przeglądane przez National Library of Medicine (NLM), aby upewnić się, że spełniają określone standardy kontroli jakości, zanim zostaną opublikowane na publicznej stronie internetowej.
Główne daty studiów
Rozpoczęcie studiów (Rzeczywisty)
26 maja 2025
Zakończenie podstawowe (Szacowany)
1 maja 2026
Ukończenie studiów (Szacowany)
1 lipca 2026
Daty rejestracji na studia
Pierwszy przesłany
3 maja 2026
Pierwszy przesłany, który spełnia kryteria kontroli jakości
10 maja 2026
Pierwszy wysłany (Rzeczywisty)
14 maja 2026
Aktualizacje rekordów badań
Ostatnia wysłana aktualizacja (Rzeczywisty)
14 maja 2026
Ostatnia przesłana aktualizacja, która spełniała kryteria kontroli jakości
10 maja 2026
Ostatnia weryfikacja
1 maja 2026
Więcej informacji
Terminy związane z tym badaniem
Słowa kluczowe
Dodatkowe istotne warunki MeSH
Inne numery identyfikacyjne badania
- 2025/189
Plan dla danych uczestnika indywidualnego (IPD)
Planujesz udostępniać dane poszczególnych uczestników (IPD)?
NIEZDECYDOWANY
Informacje o lekach i urządzeniach, dokumenty badawcze
Bada produkt leczniczy regulowany przez amerykańską FDA
Nie
Bada produkt urządzenia regulowany przez amerykańską FDA
Nie
Te informacje zostały pobrane bezpośrednio ze strony internetowej clinicaltrials.gov bez żadnych zmian. Jeśli chcesz zmienić, usunąć lub zaktualizować dane swojego badania, skontaktuj się z register@clinicaltrials.gov. Gdy tylko zmiana zostanie wprowadzona na stronie clinicaltrials.gov, zostanie ona automatycznie zaktualizowana również na naszej stronie internetowej .