Digital vs Conventional VFR in Post-Orthodontic Retention
Comparison of Periodontal Health Parameters Using Conventional Versus Digital Vacuum Formed Retainer (VFR).
This study is comparing two ways of making a retainer, the clear, removable kind worn after braces to see whether the way it's made affects gum health. One type is made using a digital scan of the teeth, and the other is made the traditional way, using a plaster mold. The study will look at how each type affects plaque buildup, gum swelling, and the depth of the space between the tooth and gum over a six-month period.
About 52 people who have just finished braces on both their upper and lower teeth will take part. Participants will be assigned to one of two groups: one group will receive a digitally made retainer, and the other will receive a traditionally made retainer.
Retainer Fitting Before the study begins, each participant's retainer is custom-made for their teeth, either from a digital scan or a plaster mold, depending on which group they're in. Participants will wear their retainer for 22 hours a day, taking it out only to eat and brush their teeth.
Daily Care Throughout the study, participants will follow the same tooth-brushing and gum-care routine, so that any differences seen between the two groups can be linked to the retainer itself rather than to differences in oral hygiene. Participants will be asked to avoid using mouthwash while wearing the retainer.
Check-Up Visits
Participants will attend four check-ups over six months:
Before the retainer is placed (baseline) One month after placement Three months after placement Six months after placement
At each visit, a dentist will check the teeth and gums for plaque buildup, gum swelling or bleeding, and pocket depth (the space between the tooth and gum) using a small measuring tool called a probe.
Follow-Up The final check-up at six months marks the end of the study for each participant. Participants can leave the study at any time if they choose.
Visão geral do estudo
Status
Intervenção / Tratamento
Descrição detalhada
Orthodontic retention is essential to prevent relapse following active orthodontic treatment, and vacuum-formed retainers (VFRs) are widely used due to their aesthetics and ease of fabrication.
Conventional VFRs are fabricated over a plaster model derived from alginate impressions, while digital VFRs are fabricated over a 3D-printed model generated from an intraoral scan.
This randomized clinical trial compares periodontal health outcomes; Plaque Index, Gingival Index, and Periodontal Pocket Depth, between the two fabrication methods.
Fifty-two participants (26 per arm) aged 15-30 years who have completed non-extraction fixed orthodontic treatment on both arches within the last month will be enrolled via non-probability consecutive sampling. Group A will receive digitally fabricated VFRs; Group B will receive conventionally fabricated VFRs, both made of 1.5 mm PETG material. Participants will wear retainers 22 hours daily and follow standardized oral hygiene instructions.
Periodontal parameters will be assessed on index teeth 16, 21, 31, and 46 at baseline (T0) and at 1, 3, and 6 months (T1-T3) post-placement. Gingival Index will follow the Loe and Silness method; Plaque Index will follow the Silness and Loe method; pocket depth will be measured with a UNC-15 probe at six sites per tooth.
Data will be analyzed in SPSS v27 using independent-sample t-tests/Mann-Whitney U tests for between-group comparisons and paired t-tests for within-group change from baseline, with stratification for age and gender as effect modifiers.
Tipo de estudo
Inscrição (Estimado)
Estágio
- Não aplicável
Contactos e Locais
Contato de estudo
- Nome: Dr Syed Riaz Hashim Principal Investigator
- Número de telefone: +92 3312763463
- E-mail: syed.hashim@zu.edu.pk
Critérios de participação
Critérios de elegibilidade
Idades elegíveis para estudo
- Filho
- Adulto
Aceita Voluntários Saudáveis
Descrição
INCLUSION CRITERIA
- Patients aged 15-30 years
- Patients with good oral and general health
- Patients in which both the arches were treated with fixed orthodontic treatment on a non-extraction basis completed within the last 1 month
- Patients with minimum 24 permanent teeth present
EXCLUSION CRITERIA
- Patients that are medically compromised due to a systemic disease
- Patients having periodontal disease before debonding
- Patients with severe and uncontrolled caries
- Patients having cleft palate or any other severe facial deformity
- Patients using drugs that have direct or indirect effect on the periodontal health such as phenytoin, cyclosporine etc.
- Patients that have a habit of chronic smoking
- Pregnant patients
Plano de estudo
Como o estudo é projetado?
Detalhes do projeto
- Finalidade Principal: Outro
- Alocação: Randomizado
- Modelo Intervencional: Atribuição Paralela
- Mascaramento: Nenhum (rótulo aberto)
Armas e Intervenções
Grupo de Participantes / Braço |
Intervenção / Tratamento |
|---|---|
|
Experimental: Group A - Digital VFR
Participants receive a vacuum-formed retainer thermoformed over a 3D-printed model generated from intraoral scanning, worn 22 hours/day for 6 months.
|
PETG, 1.5 mm, fabricated via intraoral scan and 3D-printed model
|
|
Comparador Ativo: Group B - Conventional VFR
Participants receive a vacuum-formed retainer thermoformed over a plaster model generated from alginate impressions, worn 22 hours/day for 6 months.
|
PETG, 1.5 mm, fabricated via alginate impression and plaster model
|
O que o estudo está medindo?
Medidas de resultados primários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Plaque Index
Prazo: Baseline (T0), 1 month (T1), 3 months (T2), 6 months (T3).
|
(Silness and Loe method) 4-point scale (0-3) scored on four surfaces (facial, lingual, mesial, distal) of index teeth 16, 21, 31, 46
|
Baseline (T0), 1 month (T1), 3 months (T2), 6 months (T3).
|
|
Gingival Index
Prazo: Baseline (T0), 1 month (T1), 3 months (T2), 6 months (T3).
|
(Loe and Silness method) 4-point scale (0-3) assessing inflammation and bleeding on four surfaces of index teeth 16, 21, 31, 46
|
Baseline (T0), 1 month (T1), 3 months (T2), 6 months (T3).
|
|
Periodontal Pocket Depth
Prazo: Baseline (T0), 1 month (T1), 3 months (T2), 6 months (T3)
|
measured in mm with a UNC-15 probe at six sites per index tooth (mesiofacial, midfacial, distofacial, mesiolingual, midlingual, distolingual); deepest site recorded
|
Baseline (T0), 1 month (T1), 3 months (T2), 6 months (T3)
|
Colaboradores e Investigadores
Patrocinador
Datas de registro do estudo
Datas Principais do Estudo
Início do estudo (Estimado)
Conclusão Primária (Estimado)
Conclusão do estudo (Estimado)
Datas de inscrição no estudo
Enviado pela primeira vez
Enviado pela primeira vez que atendeu aos critérios de CQ
Primeira postagem (Real)
Atualizações de registro de estudo
Última Atualização Postada (Real)
Última atualização enviada que atendeu aos critérios de controle de qualidade
Última verificação
Mais Informações
Termos relacionados a este estudo
Termos MeSH relevantes adicionais
Outros números de identificação do estudo
- ZU-ORTHO-VFR-2026-001
Plano para dados de participantes individuais (IPD)
Planeja compartilhar dados de participantes individuais (IPD)?
Informações sobre medicamentos e dispositivos, documentos de estudo
Estuda um medicamento regulamentado pela FDA dos EUA
Estuda um produto de dispositivo regulamentado pela FDA dos EUA
Essas informações foram obtidas diretamente do site clinicaltrials.gov sem nenhuma alteração. Se você tiver alguma solicitação para alterar, remover ou atualizar os detalhes do seu estudo, entre em contato com register@clinicaltrials.gov. Assim que uma alteração for implementada em clinicaltrials.gov, ela também será atualizada automaticamente em nosso site .