Temperature Change of the Pulpal Floor and Restoration With Preheated Resin Composite (A Randomized Clinical Trial)
19. november 2021 opdateret af: Alshimaa Nasser Mahmoud
clinical evaluation of the effect of preheating BIS-GMA free resin composite at different temperatures on temperature change of the pulpal floor and restorations and compare it with BIS-GMA containing resin composite.
Hypothesis: Could the preheated composite affect the temperature of the pulpal floor
Studieoversigt
Status
Afsluttet
Betingelser
Intervention / Behandling
Undersøgelsestype
Interventionel
Tilmelding (Faktiske)
20
Fase
- Ikke anvendelig
Kontakter og lokationer
Dette afsnit indeholder kontaktoplysninger for dem, der udfører undersøgelsen, og oplysninger om, hvor denne undersøgelse udføres.
Studiesteder
-
-
-
Minya, Egypten, 61519
- Faculty of Dentistry - Minia University
-
-
Deltagelseskriterier
Forskere leder efter personer, der passer til en bestemt beskrivelse, kaldet berettigelseskriterier. Nogle eksempler på disse kriterier er en persons generelle helbredstilstand eller tidligere behandlinger.
Berettigelseskriterier
Aldre berettiget til at studere
25 år til 45 år (Voksen)
Tager imod sunde frivillige
Ja
Køn, der er berettiget til at studere
Alle
Beskrivelse
Inclusion Criteria:
- Healthy men and women patients of 25-45 years.
- They should have a good oral hygiene level.
- Presence of at least two posterior class I or II carious lesions to be restored with two different composite resin restorations.
- All carious lesions in selected patients didn't close to the pulp in the preoperative radiograph.
- No preoperative pain.
- Normal occlusal contact with opposing teeth.
- No history of periodontal treatment, including periodontal surgery, in the past year.
- All patients had to sign a written consent before being included.
- A good likelihood of recall availability.
Exclusion Criteria:
- patient with severe periodontitis or severe erosion damage.
- patients with a compromised medical history or had received therapeutic irradiation to the head and neck region.
- If analgesics or antibiotics had administered by the patient during the past 12 hours preoperatively as it might alter their pain perception.
- patients reported bruxism or clenching.
- Greater than grade I mobility or pocket depth greater than 5mm.
- Non-restorable teeth or hopeless teeth.
- Immature teeth.
- Radiographic evidence of external or internal root resorption.
- Alcoholic and smoker patients.
- Pregnant or breastfeeding ladies.
- Patients who had physical disabilities, or who are unable to brush their teeth.
- Individuals who had sensitive teeth but with one of the following conditions was excluded from the study, teeth with large restoration, abutment of teeth of removable partial dentures, dental restorations, abutment of teeth of removable partial dentures, enamel cracks, leakage of fillings or other restorations teeth, dental pulp lesions, dental abscesses, pulpitis, and atypical facial pain.
- Patients who had non-carious lesions like attrition, erosion, abrasion or abfraction.
- Patients had participated in a clinical trial within 6 months before commencement of this trial.
- Patients unable to return for a recall appointment.
Studieplan
Dette afsnit indeholder detaljer om studieplanen, herunder hvordan undersøgelsen er designet, og hvad undersøgelsen måler.
Hvordan er undersøgelsen tilrettelagt?
Design detaljer
- Primært formål: Andet
- Tildeling: Randomiseret
- Interventionel model: Parallel tildeling
- Maskning: Ingen (Åben etiket)
Våben og indgreb
Deltagergruppe / Arm |
Intervention / Behandling |
|---|---|
|
Aktiv komparator: Admira 50º C
in this subgroup the patient's teeth was restored with Admira fusion extra resin composite preheated to 50º C
|
evaluate the effect of preheating BIS-GMA free resin composite at different temperatures on temperature change of the pulpal floor and restorations and compare it with BIS-GMA containing resin composite.
Andre navne:
|
|
Aktiv komparator: Admira 70º C
in this subgroup the patient's teeth was restored with Admira fusion extra resin composite preheated to 70º C
|
evaluate the effect of preheating BIS-GMA free resin composite at different temperatures on temperature change of the pulpal floor and restorations and compare it with BIS-GMA containing resin composite.
Andre navne:
|
|
Aktiv komparator: Viscalor 50º C
in this subgroup the patient's teeth was restored with Viscalor resin composite preheated to 50º C
|
evaluate the effect of preheating BIS-GMA free resin composite at different temperatures on temperature change of the pulpal floor and restorations and compare it with BIS-GMA containing resin composite.
Andre navne:
|
|
Aktiv komparator: Viscalor 70º C
in this subgroup the patient's teeth was restored with Viscalor resin composite preheated to 70º C
|
evaluate the effect of preheating BIS-GMA free resin composite at different temperatures on temperature change of the pulpal floor and restorations and compare it with BIS-GMA containing resin composite.
Andre navne:
|
Hvad måler undersøgelsen?
Primære resultatmål
Resultatmål |
Foranstaltningsbeskrivelse |
Tidsramme |
|---|---|---|
|
pulpal floor temperature and restoration temperature
Tidsramme: one year
|
evaluation the effect of preheating BIS GMA free resin composite at different temperature on temperature change of pulpal floor and restoration and compare it with BIS GMA containing resin composite All readings were taken with the presence of a rubber dam and recorded in Celsius (°C). Five temperature readings were measured for each tooth; (C0): pulpal floor temperature before beginning the restorative procedure. (C1): pulpal floor temperature during placement of preheated composite. (C2): top composite surface after packing and before curing. (C3): pulpal floor temperature after curing of the preheated composite. (C4): top composite surface after curing. The pulpal floor and the restoration temperature of each tooth was measured by a K-type temperature Probe attached to portable mini type thermometer device |
one year
|
Sekundære resultatmål
Resultatmål |
Foranstaltningsbeskrivelse |
Tidsramme |
|---|---|---|
|
The effect of different preheating temperatures on restoration temperature and pulpal floor temperature
Tidsramme: one year
|
Five temperature readings were measured for each tooth; (C0): pulpal floor temperature before beginning the restorative procedure.
(C1): pulpal floor temperature during placement of preheated composite.
(C2): top composite surface after packing and before curing.
(C3): pulpal floor temperature after curing of the preheated composite.
(C4): top composite surface after curing.
The pulpal floor and the restoration temperature of each tooth was measured by a K-type temperature Probe attached to portable mini type thermometer device
|
one year
|
Andre resultatmål
Resultatmål |
Foranstaltningsbeskrivelse |
Tidsramme |
|---|---|---|
|
The difference in restoration and pulpal floor temperatures before and after curing of preheated resin composite
Tidsramme: one year
|
Five temperature readings were measured for each tooth; (C0): pulpal floor temperature before beginning the restorative procedure.
(C1): pulpal floor temperature during placement of preheated composite.
(C2): top composite surface after packing and before curing.
(C3): pulpal floor temperature after curing of the preheated composite.
(C4): top composite surface after curing.
The pulpal floor and the restoration temperature of each tooth was measured by a K-type temperature Probe attached to portable mini type thermometer device
|
one year
|
Samarbejdspartnere og efterforskere
Det er her, du vil finde personer og organisationer, der er involveret i denne undersøgelse.
Sponsor
Efterforskere
- Studieleder: Mona I Riad, Professor, Professor at Faculty of Dentistry Cairo University
- Studieleder: Nermin A Mahmoud, Lecturer, Lecturer at Faculty of Dentistry Minia University
Datoer for undersøgelser
Disse datoer sporer fremskridtene for indsendelser af undersøgelsesrekord og resumeresultater til ClinicalTrials.gov. Studieregistreringer og rapporterede resultater gennemgås af National Library of Medicine (NLM) for at sikre, at de opfylder specifikke kvalitetskontrolstandarder, før de offentliggøres på den offentlige hjemmeside.
Studer store datoer
Studiestart (Faktiske)
1. april 2021
Primær færdiggørelse (Faktiske)
15. juni 2021
Studieafslutning (Faktiske)
28. september 2021
Datoer for studieregistrering
Først indsendt
8. november 2021
Først indsendt, der opfyldte QC-kriterier
19. november 2021
Først opslået (Faktiske)
1. december 2021
Opdateringer af undersøgelsesjournaler
Sidste opdatering sendt (Faktiske)
1. december 2021
Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier
19. november 2021
Sidst verificeret
1. november 2021
Mere information
Begreber relateret til denne undersøgelse
Nøgleord
Andre undersøgelses-id-numre
- 490
Plan for individuelle deltagerdata (IPD)
Planlægger du at dele individuelle deltagerdata (IPD)?
JA
Lægemiddel- og udstyrsoplysninger, undersøgelsesdokumenter
Studerer et amerikansk FDA-reguleret lægemiddelprodukt
Ingen
Studerer et amerikansk FDA-reguleret enhedsprodukt
Ingen
Disse oplysninger blev hentet direkte fra webstedet clinicaltrials.gov uden ændringer. Hvis du har nogen anmodninger om at ændre, fjerne eller opdatere dine undersøgelsesoplysninger, bedes du kontakte register@clinicaltrials.gov. Så snart en ændring er implementeret på clinicaltrials.gov, vil denne også blive opdateret automatisk på vores hjemmeside .
Kliniske forsøg med preheating of resin composite
-
Istanbul UniversityAfsluttetIkke-kariøs cervikal læsionKalkun