3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment
Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial
調査の概要
状態
詳細な説明
Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.
Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.
研究の種類
入学 (推定)
段階
- 適用できない
連絡先と場所
研究連絡先
- 名前:Salma A Daabis, BDS
- 電話番号:+201066600270
- メール:salma.daabis@pua.edu.eg
研究連絡先のバックアップ
- 名前:Ahmed Sh Hashem, Professor
- 電話番号:+201002024437
- メール:ahmedshawkydent@yahoo.com
参加基準
適格基準
就学可能な年齢
- 大人
健康ボランティアの受け入れ
説明
Inclusion Criteria:
- Age range 21-35 years old after finishing orthodontic treatment.
- Presence of all maxillary and mandibular anterior teeth with normal shape and size.
- Completion of orthodontic treatment with full fixed appliances.
Exclusion Criteria:
- Patients with cleft lip and/or palate or any other craniofacial syndrome
- Patients with compromised oral hygiene or periodontal disease
- Patients who had orthognathic surgery
- Lingual appliance treatments
- Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
- Patients who had separate arch debondings with a difference of more than 2 months in-between jaws
研究計画
研究はどのように設計されていますか?
デザインの詳細
- 主な目的:処理
- 割り当て:ランダム化
- 介入モデル:並列代入
- マスキング:なし(オープンラベル)
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的:Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
|
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
|
|
実験的:3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
|
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
|
|
実験的:3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
|
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.
|
この研究は何を測定していますか?
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Orthodontic stability assessed using Little's Irregularity Index
時間枠:12 months
|
Orthodontic stability will be assessed using Little's Irregularity Index on digital models.
The Little's Irregularity Index ranges from 0 mm to higher positive values.
A score of 0 mm indicates perfect alignment.
Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
|
12 months
|
二次結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
Retainer failure rate
時間枠:12 months
|
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
|
12 months
|
|
Probing Pocket Depth (PPD)
時間枠:12 months
|
Assessment of periodontal pocket depth using a periodontal probe.
Pocket depth will be recorded in millimeters (mm).
Lower values indicate better periodontal health.
|
12 months
|
|
Plaque Index (Silness and Löe Plaque Index)
時間枠:12 months
|
Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3: 0: No plaque
Lower scores indicate better oral hygiene. |
12 months
|
|
Gingival Index (Löe and Silness Gingival Index)
時間枠:12 months
|
Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3: 0: Normal gingiva
Lower scores indicate better gingival health. |
12 months
|
|
Bleeding on Probing (BOP)
時間枠:12 months
|
Assessment of bleeding on probing as an indicator of gingival inflammation.
Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%).
Lower percentages indicate better periodontal health.
|
12 months
|
協力者と研究者
スポンサー
捜査官
- 主任研究者:Salma A daabis, BDS、Minia University
- 主任研究者:Ahmed Sh Hashem, Professor、Minia University
研究記録日
主要日程の研究
研究開始 (推定)
一次修了 (推定)
研究の完了 (推定)
試験登録日
最初に提出
QC基準を満たした最初の提出物
最初の投稿 (実際)
学習記録の更新
投稿された最後の更新 (実際)
QC基準を満たした最後の更新が送信されました
最終確認日
詳しくは
本研究に関する用語
キーワード
その他の研究ID番号
- SDD-RCT-2026-01
個々の参加者データ (IPD) の計画
個々の参加者データ (IPD) を共有する予定はありますか?
IPD プランの説明
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
米国FDA規制機器製品の研究
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。