Denna sida har översatts automatiskt och översättningens korrekthet kan inte garanteras. Vänligen se engelsk version för en källtext.

3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment

30 juli 2026 uppdaterad av: Salma Daabis, Minia University

Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial

This randomized clinical trial aims to compare the clinical performance of two types of three-dimensionally printed fixed retainers (Cobalt-Chromium and Titanium Grade 5) with the conventional multistranded stainless steel fixed retainer following orthodontic treatment. Thirty-six participants will be randomly allocated into three parallel groups with a 1:1:1 allocation ratio. The primary outcome is post-treatment stability assessed by Little's Irregularity Index and lower arch dimensions. Secondary outcomes include bond failure rate and periodontal parameters over a 12-month follow-up period.

Studieöversikt

Detaljerad beskrivning

Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.

Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.

Studietyp

Interventionell

Inskrivning (Beräknad)

36

Fas

  • Inte tillämpbar

Kontakter och platser

Det här avsnittet innehåller kontaktuppgifter för dem som genomför studien och information om var denna studie genomförs.

Studiekontakt

Studera Kontakt Backup

Deltagandekriterier

Forskare letar efter personer som passar en viss beskrivning, så kallade behörighetskriterier. Några exempel på dessa kriterier är en persons allmänna hälsotillstånd eller tidigare behandlingar.

Urvalskriterier

Åldrar som är berättigade till studier

  • Vuxen

Tar emot friska volontärer

Ja

Beskrivning

Inclusion Criteria:

  • Age range 21-35 years old after finishing orthodontic treatment.
  • Presence of all maxillary and mandibular anterior teeth with normal shape and size.
  • Completion of orthodontic treatment with full fixed appliances.

Exclusion Criteria:

  • Patients with cleft lip and/or palate or any other craniofacial syndrome
  • Patients with compromised oral hygiene or periodontal disease
  • Patients who had orthognathic surgery
  • Lingual appliance treatments
  • Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
  • Patients who had separate arch debondings with a difference of more than 2 months in-between jaws

Studieplan

Det här avsnittet ger detaljer om studieplanen, inklusive hur studien är utformad och vad studien mäter.

Hur är studien utformad?

Designdetaljer

  • Primärt syfte: Behandling
  • Tilldelning: Randomiserad
  • Interventionsmodell: Parallellt uppdrag
  • Maskning: Ingen (Open Label)

Vapen och interventioner

Deltagargrupp / Arm
Intervention / Behandling
Experimentell: Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
Experimentell: 3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
Experimentell: 3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.

Vad mäter studien?

Primära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
Orthodontic stability assessed using Little's Irregularity Index
Tidsram: 12 months
Orthodontic stability will be assessed using Little's Irregularity Index on digital models. The Little's Irregularity Index ranges from 0 mm to higher positive values. A score of 0 mm indicates perfect alignment. Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
12 months

Sekundära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
Retainer failure rate
Tidsram: 12 months
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
12 months
Probing Pocket Depth (PPD)
Tidsram: 12 months
Assessment of periodontal pocket depth using a periodontal probe. Pocket depth will be recorded in millimeters (mm). Lower values indicate better periodontal health.
12 months
Plaque Index (Silness and Löe Plaque Index)
Tidsram: 12 months

Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3:

0: No plaque

  1. A film of plaque detectable by probe
  2. Moderate plaque accumulation
  3. Abundant plaque accumulation

Lower scores indicate better oral hygiene.

12 months
Gingival Index (Löe and Silness Gingival Index)
Tidsram: 12 months

Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3:

0: Normal gingiva

  1. Mild inflammation
  2. Moderate inflammation
  3. Severe inflammation

Lower scores indicate better gingival health.

12 months
Bleeding on Probing (BOP)
Tidsram: 12 months
Assessment of bleeding on probing as an indicator of gingival inflammation. Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%). Lower percentages indicate better periodontal health.
12 months

Samarbetspartners och utredare

Det är här du hittar personer och organisationer som är involverade i denna studie.

Utredare

  • Huvudutredare: Salma A daabis, BDS, Minia University
  • Huvudutredare: Ahmed Sh Hashem, Professor, Minia University

Studieavstämningsdatum

Dessa datum spårar framstegen för inlämningar av studieposter och sammanfattande resultat till ClinicalTrials.gov. Studieposter och rapporterade resultat granskas av National Library of Medicine (NLM) för att säkerställa att de uppfyller specifika kvalitetskontrollstandarder innan de publiceras på den offentliga webbplatsen.

Studera stora datum

Studiestart (Beräknad)

1 augusti 2026

Primärt slutförande (Beräknad)

1 augusti 2027

Avslutad studie (Beräknad)

1 september 2027

Studieregistreringsdatum

Först inskickad

7 juli 2026

Först inskickad som uppfyllde QC-kriterierna

22 juli 2026

Första postat (Faktisk)

28 juli 2026

Uppdateringar av studier

Senaste uppdatering publicerad (Faktisk)

31 juli 2026

Senaste inskickade uppdateringen som uppfyllde QC-kriterierna

30 juli 2026

Senast verifierad

1 juli 2026

Mer information

Termer relaterade till denna studie

Plan för individuella deltagardata (IPD)

Planerar du att dela individuella deltagardata (IPD)?

NEJ

IPD-planbeskrivning

No plan to share individual participant data (IPD).

Läkemedels- och apparatinformation, studiedokument

Studerar en amerikansk FDA-reglerad läkemedelsprodukt

Nej

Studerar en amerikansk FDA-reglerad produktprodukt

Nej

Denna information hämtades direkt från webbplatsen clinicaltrials.gov utan några ändringar. Om du har några önskemål om att ändra, ta bort eller uppdatera dina studieuppgifter, vänligen kontakta register@clinicaltrials.gov. Så snart en ändring har implementerats på clinicaltrials.gov, kommer denna att uppdateras automatiskt även på vår webbplats .

Prenumerera