Esta página se tradujo automáticamente y no se garantiza la precisión de la traducción. por favor refiérase a versión inglesa para un texto fuente.

3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment

30 de julio de 2026 actualizado por: Salma Daabis, Minia University

Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial

This randomized clinical trial aims to compare the clinical performance of two types of three-dimensionally printed fixed retainers (Cobalt-Chromium and Titanium Grade 5) with the conventional multistranded stainless steel fixed retainer following orthodontic treatment. Thirty-six participants will be randomly allocated into three parallel groups with a 1:1:1 allocation ratio. The primary outcome is post-treatment stability assessed by Little's Irregularity Index and lower arch dimensions. Secondary outcomes include bond failure rate and periodontal parameters over a 12-month follow-up period.

Descripción general del estudio

Descripción detallada

Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.

Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.

Tipo de estudio

Intervencionista

Inscripción (Estimado)

36

Fase

  • No aplica

Contactos y Ubicaciones

Esta sección proporciona los datos de contacto de quienes realizan el estudio e información sobre dónde se lleva a cabo este estudio.

Estudio Contacto

Copia de seguridad de contactos de estudio

Criterios de participación

Los investigadores buscan personas que se ajusten a una determinada descripción, denominada criterio de elegibilidad. Algunos ejemplos de estos criterios son el estado de salud general de una persona o tratamientos previos.

Criterio de elegibilidad

Edades elegibles para estudiar

  • Adulto

Acepta Voluntarios Saludables

Sí

Descripción

Inclusion Criteria:

  • Age range 21-35 years old after finishing orthodontic treatment.
  • Presence of all maxillary and mandibular anterior teeth with normal shape and size.
  • Completion of orthodontic treatment with full fixed appliances.

Exclusion Criteria:

  • Patients with cleft lip and/or palate or any other craniofacial syndrome
  • Patients with compromised oral hygiene or periodontal disease
  • Patients who had orthognathic surgery
  • Lingual appliance treatments
  • Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
  • Patients who had separate arch debondings with a difference of more than 2 months in-between jaws

Plan de estudios

Esta sección proporciona detalles del plan de estudio, incluido cómo está diseñado el estudio y qué mide el estudio.

¿Cómo está diseñado el estudio?

Detalles de diseño

  • Propósito principal: Tratamiento
  • Asignación: Aleatorizado
  • Modelo Intervencionista: Asignación paralela
  • Enmascaramiento: Ninguno (etiqueta abierta)

Armas e Intervenciones

Grupo de participantes/brazo
Intervención / Tratamiento
Experimental: Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
Experimental: 3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
Experimental: 3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.

¿Qué mide el estudio?

Medidas de resultado primarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Orthodontic stability assessed using Little's Irregularity Index
Periodo de tiempo: 12 months
Orthodontic stability will be assessed using Little's Irregularity Index on digital models. The Little's Irregularity Index ranges from 0 mm to higher positive values. A score of 0 mm indicates perfect alignment. Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
12 months

Medidas de resultado secundarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Retainer failure rate
Periodo de tiempo: 12 months
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
12 months
Probing Pocket Depth (PPD)
Periodo de tiempo: 12 months
Assessment of periodontal pocket depth using a periodontal probe. Pocket depth will be recorded in millimeters (mm). Lower values indicate better periodontal health.
12 months
Plaque Index (Silness and Löe Plaque Index)
Periodo de tiempo: 12 months

Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3:

0: No plaque

  1. A film of plaque detectable by probe
  2. Moderate plaque accumulation
  3. Abundant plaque accumulation

Lower scores indicate better oral hygiene.

12 months
Gingival Index (Löe and Silness Gingival Index)
Periodo de tiempo: 12 months

Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3:

0: Normal gingiva

  1. Mild inflammation
  2. Moderate inflammation
  3. Severe inflammation

Lower scores indicate better gingival health.

12 months
Bleeding on Probing (BOP)
Periodo de tiempo: 12 months
Assessment of bleeding on probing as an indicator of gingival inflammation. Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%). Lower percentages indicate better periodontal health.
12 months

Colaboradores e Investigadores

Aquí es donde encontrará personas y organizaciones involucradas en este estudio.

Patrocinador

Investigadores

  • Investigador principal: Salma A daabis, BDS, Minia University
  • Investigador principal: Ahmed Sh Hashem, Professor, Minia University

Fechas de registro del estudio

Estas fechas rastrean el progreso del registro del estudio y los envíos de resultados resumidos a ClinicalTrials.gov. Los registros del estudio y los resultados informados son revisados ​​por la Biblioteca Nacional de Medicina (NLM) para asegurarse de que cumplan con los estándares de control de calidad específicos antes de publicarlos en el sitio web público.

Fechas importantes del estudio

Inicio del estudio (Estimado)

1 de agosto de 2026

Finalización primaria (Estimado)

1 de agosto de 2027

Finalización del estudio (Estimado)

1 de septiembre de 2027

Fechas de registro del estudio

Enviado por primera vez

7 de julio de 2026

Primero enviado que cumplió con los criterios de control de calidad

22 de julio de 2026

Publicado por primera vez (Actual)

28 de julio de 2026

Actualizaciones de registros de estudio

Última actualización publicada (Actual)

31 de julio de 2026

Última actualización enviada que cumplió con los criterios de control de calidad

30 de julio de 2026

Última verificación

1 de julio de 2026

Más información

Términos relacionados con este estudio

Plan de datos de participantes individuales (IPD)

¿Planea compartir datos de participantes individuales (IPD)?

NO

Descripción del plan IPD

No plan to share individual participant data (IPD).

Información sobre medicamentos y dispositivos, documentos del estudio

Estudia un producto farmacéutico regulado por la FDA de EE. UU.

No

Estudia un producto de dispositivo regulado por la FDA de EE. UU.

No

Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .

Suscribir