Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment

torstai 30. heinäkuuta 2026 päivittänyt: Salma Daabis, Minia University

Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial

This randomized clinical trial aims to compare the clinical performance of two types of three-dimensionally printed fixed retainers (Cobalt-Chromium and Titanium Grade 5) with the conventional multistranded stainless steel fixed retainer following orthodontic treatment. Thirty-six participants will be randomly allocated into three parallel groups with a 1:1:1 allocation ratio. The primary outcome is post-treatment stability assessed by Little's Irregularity Index and lower arch dimensions. Secondary outcomes include bond failure rate and periodontal parameters over a 12-month follow-up period.

Tutkimuksen yleiskatsaus

Yksityiskohtainen kuvaus

Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.

Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.

Opintotyyppi

Interventio

Ilmoittautuminen (Arvioitu)

36

Vaihe

  • Ei sovellettavissa

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskeluyhteys

Tutki yhteystietojen varmuuskopiointi

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Aikuinen

Hyväksyy terveitä vapaaehtoisia

Joo

Kuvaus

Inclusion Criteria:

  • Age range 21-35 years old after finishing orthodontic treatment.
  • Presence of all maxillary and mandibular anterior teeth with normal shape and size.
  • Completion of orthodontic treatment with full fixed appliances.

Exclusion Criteria:

  • Patients with cleft lip and/or palate or any other craniofacial syndrome
  • Patients with compromised oral hygiene or periodontal disease
  • Patients who had orthognathic surgery
  • Lingual appliance treatments
  • Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
  • Patients who had separate arch debondings with a difference of more than 2 months in-between jaws

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

  • Ensisijainen käyttötarkoitus: Hoito
  • Jako: Satunnaistettu
  • Inventiomalli: Rinnakkaistehtävä
  • Naamiointi: Ei mitään (avoin tarra)

Aseet ja interventiot

Osallistujaryhmä / Arm
Interventio / Hoito
Kokeellinen: Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
Kokeellinen: 3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
Kokeellinen: 3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Orthodontic stability assessed using Little's Irregularity Index
Aikaikkuna: 12 months
Orthodontic stability will be assessed using Little's Irregularity Index on digital models. The Little's Irregularity Index ranges from 0 mm to higher positive values. A score of 0 mm indicates perfect alignment. Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
12 months

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Retainer failure rate
Aikaikkuna: 12 months
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
12 months
Probing Pocket Depth (PPD)
Aikaikkuna: 12 months
Assessment of periodontal pocket depth using a periodontal probe. Pocket depth will be recorded in millimeters (mm). Lower values indicate better periodontal health.
12 months
Plaque Index (Silness and Löe Plaque Index)
Aikaikkuna: 12 months

Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3:

0: No plaque

  1. A film of plaque detectable by probe
  2. Moderate plaque accumulation
  3. Abundant plaque accumulation

Lower scores indicate better oral hygiene.

12 months
Gingival Index (Löe and Silness Gingival Index)
Aikaikkuna: 12 months

Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3:

0: Normal gingiva

  1. Mild inflammation
  2. Moderate inflammation
  3. Severe inflammation

Lower scores indicate better gingival health.

12 months
Bleeding on Probing (BOP)
Aikaikkuna: 12 months
Assessment of bleeding on probing as an indicator of gingival inflammation. Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%). Lower percentages indicate better periodontal health.
12 months

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Sponsori

Tutkijat

  • Päätutkija: Salma A daabis, BDS, Minia University
  • Päätutkija: Ahmed Sh Hashem, Professor, Minia University

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Arvioitu)

Lauantai 1. elokuuta 2026

Ensisijainen valmistuminen (Arvioitu)

Sunnuntai 1. elokuuta 2027

Opintojen valmistuminen (Arvioitu)

Keskiviikko 1. syyskuuta 2027

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Tiistai 7. heinäkuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Keskiviikko 22. heinäkuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Tiistai 28. heinäkuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Perjantai 31. heinäkuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Torstai 30. heinäkuuta 2026

Viimeksi vahvistettu

Keskiviikko 1. heinäkuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Yksittäisten osallistujien tietojen suunnitelma (IPD)

Aiotko jakaa yksittäisten osallistujien tietoja (IPD)?

EI

IPD-suunnitelman kuvaus

No plan to share individual participant data (IPD).

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Ei

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Ei

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Tilaa