Ezt az oldalt automatikusan lefordították, és a fordítás pontossága nem garantált. Kérjük, olvassa el a angol verzió forrásszöveghez.

3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment

2026. július 30. frissítette: Salma Daabis, Minia University

Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial

This randomized clinical trial aims to compare the clinical performance of two types of three-dimensionally printed fixed retainers (Cobalt-Chromium and Titanium Grade 5) with the conventional multistranded stainless steel fixed retainer following orthodontic treatment. Thirty-six participants will be randomly allocated into three parallel groups with a 1:1:1 allocation ratio. The primary outcome is post-treatment stability assessed by Little's Irregularity Index and lower arch dimensions. Secondary outcomes include bond failure rate and periodontal parameters over a 12-month follow-up period.

A tanulmány áttekintése

Részletes leírás

Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.

Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.

Tanulmány típusa

Beavatkozó

Beiratkozás (Becsült)

36

Fázis

  • Nem alkalmazható

Kapcsolatok és helyek

Ez a rész a vizsgálatot végzők elérhetőségeit, valamint a vizsgálat lefolytatásának helyére vonatkozó információkat tartalmazza.

Tanulmányi kapcsolat

Tanulmányozza a kapcsolattartók biztonsági mentését

Részvételi kritériumok

A kutatók olyan embereket keresnek, akik megfelelnek egy bizonyos leírásnak, az úgynevezett jogosultsági kritériumoknak. Néhány példa ezekre a kritériumokra a személy általános egészségi állapota vagy a korábbi kezelések.

Jogosultsági kritériumok

Tanulmányozható életkorok

  • Felnőtt

Egészséges önkénteseket fogad

Igen

Leírás

Inclusion Criteria:

  • Age range 21-35 years old after finishing orthodontic treatment.
  • Presence of all maxillary and mandibular anterior teeth with normal shape and size.
  • Completion of orthodontic treatment with full fixed appliances.

Exclusion Criteria:

  • Patients with cleft lip and/or palate or any other craniofacial syndrome
  • Patients with compromised oral hygiene or periodontal disease
  • Patients who had orthognathic surgery
  • Lingual appliance treatments
  • Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
  • Patients who had separate arch debondings with a difference of more than 2 months in-between jaws

Tanulási terv

Ez a rész a vizsgálati terv részleteit tartalmazza, beleértve a vizsgálat megtervezését és a vizsgálat mérését.

Hogyan készül a tanulmány?

Tervezési részletek

  • Elsődleges cél: Kezelés
  • Kiosztás: Véletlenszerűsített
  • Beavatkozó modell: Párhuzamos hozzárendelés
  • Maszkolás: Nincs (Open Label)

Fegyverek és beavatkozások

Résztvevő csoport / kar
Beavatkozás / kezelés
Kísérleti: Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
Kísérleti: 3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
Kísérleti: 3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.

Mit mér a tanulmány?

Elsődleges eredményintézkedések

Eredménymérő
Intézkedés leírása
Időkeret
Orthodontic stability assessed using Little's Irregularity Index
Időkeret: 12 months
Orthodontic stability will be assessed using Little's Irregularity Index on digital models. The Little's Irregularity Index ranges from 0 mm to higher positive values. A score of 0 mm indicates perfect alignment. Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
12 months

Másodlagos eredményintézkedések

Eredménymérő
Intézkedés leírása
Időkeret
Retainer failure rate
Időkeret: 12 months
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
12 months
Probing Pocket Depth (PPD)
Időkeret: 12 months
Assessment of periodontal pocket depth using a periodontal probe. Pocket depth will be recorded in millimeters (mm). Lower values indicate better periodontal health.
12 months
Plaque Index (Silness and Löe Plaque Index)
Időkeret: 12 months

Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3:

0: No plaque

  1. A film of plaque detectable by probe
  2. Moderate plaque accumulation
  3. Abundant plaque accumulation

Lower scores indicate better oral hygiene.

12 months
Gingival Index (Löe and Silness Gingival Index)
Időkeret: 12 months

Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3:

0: Normal gingiva

  1. Mild inflammation
  2. Moderate inflammation
  3. Severe inflammation

Lower scores indicate better gingival health.

12 months
Bleeding on Probing (BOP)
Időkeret: 12 months
Assessment of bleeding on probing as an indicator of gingival inflammation. Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%). Lower percentages indicate better periodontal health.
12 months

Együttműködők és nyomozók

Itt találhatja meg a tanulmányban érintett személyeket és szervezeteket.

Szponzor

Nyomozók

  • Kutatásvezető: Salma A daabis, BDS, Minia University
  • Kutatásvezető: Ahmed Sh Hashem, Professor, Minia University

Tanulmányi rekorddátumok

Ezek a dátumok nyomon követik a ClinicalTrials.gov webhelyre benyújtott vizsgálati rekordok és összefoglaló eredmények benyújtásának folyamatát. A vizsgálati feljegyzéseket és a jelentett eredményeket a Nemzeti Orvostudományi Könyvtár (NLM) felülvizsgálja, hogy megbizonyosodjon arról, hogy megfelelnek-e az adott minőség-ellenőrzési szabványoknak, mielőtt közzéteszik őket a nyilvános weboldalon.

Tanulmány főbb dátumok

Tanulmány kezdete (Becsült)

2026. augusztus 1.

Elsődleges befejezés (Becsült)

2027. augusztus 1.

A tanulmány befejezése (Becsült)

2027. szeptember 1.

Tanulmányi regisztráció dátumai

Először benyújtva

2026. július 7.

Először nyújtották be, amely megfelel a minőségbiztosítási kritériumoknak

2026. július 22.

Első közzététel (Tényleges)

2026. július 28.

Tanulmányi rekordok frissítései

Utolsó frissítés közzétéve (Tényleges)

2026. július 31.

Az utolsó frissítés elküldve, amely megfelel a minőségbiztosítási kritériumoknak

2026. július 30.

Utolsó ellenőrzés

2026. július 1.

Több információ

A tanulmányhoz kapcsolódó kifejezések

Terv az egyéni résztvevői adatokhoz (IPD)

Tervezi megosztani az egyéni résztvevői adatokat (IPD)?

NEM

IPD terv leírása

No plan to share individual participant data (IPD).

Gyógyszer- és eszközinformációk, tanulmányi dokumentumok

Egy amerikai FDA által szabályozott gyógyszerkészítményt tanulmányoz

Nem

Egy amerikai FDA által szabályozott eszközterméket tanulmányoz

Nem

Ezt az információt közvetlenül a clinicaltrials.gov webhelyről szereztük be, változtatás nélkül. Ha bármilyen kérése van vizsgálati adatainak módosítására, eltávolítására vagy frissítésére, kérjük, írjon a következő címre: register@clinicaltrials.gov. Amint a változás bevezetésre kerül a clinicaltrials.gov oldalon, ez a webhelyünkön is automatikusan frissül. .

Iratkozz fel