- ICH GCP
- US Clinical Trials Registry
- Klinisk utprøving NCT07730476
3D-Printed vs Conventional Fixed Retainers After Orthodontic Treatment
Comparison Between Three-Dimensionally Printed Fixed Retainers Versus Conventional Multistranded Stainless Steel Fixed Retainers: Randomized Clinical Trial
Studieoversikt
Status
Forhold
Detaljert beskrivelse
Orthodontic relapse remains one of the greatest challenges following the completion of orthodontic treatment. Conventional multistranded stainless steel fixed retainers are considered the gold standard for long-term retention; however, they have several limitations, including operator-dependent adaptation, prolonged chairside time, structural instability, and possible unwanted tooth movement.
Advances in digital dentistry have introduced CAD/CAM technology and additive manufacturing (3D printing), enabling the fabrication of customized fixed retainers with improved adaptation and manufacturing accuracy. Three-dimensional printed retainers fabricated from Cobalt-Chromium (Co-Cr) and Titanium Grade 5 (Ti-6Al-4V) alloys may provide superior mechanical properties, greater manufacturing precision, and potentially improved clinical performance compared with conventional retainers.
Studietype
Registrering (Antatt)
Fase
- Ikke aktuelt
Kontakter og plasseringer
Studiekontakt
- Navn: Salma A Daabis, BDS
- Telefonnummer: +201066600270
- E-post: salma.daabis@pua.edu.eg
Studer Kontakt Backup
- Navn: Ahmed Sh Hashem, Professor
- Telefonnummer: +201002024437
- E-post: ahmedshawkydent@yahoo.com
Deltakelseskriterier
Kvalifikasjonskriterier
Alder som er kvalifisert for studier
- Voksen
Tar imot friske frivillige
Beskrivelse
Inclusion Criteria:
- Age range 21-35 years old after finishing orthodontic treatment.
- Presence of all maxillary and mandibular anterior teeth with normal shape and size.
- Completion of orthodontic treatment with full fixed appliances.
Exclusion Criteria:
- Patients with cleft lip and/or palate or any other craniofacial syndrome
- Patients with compromised oral hygiene or periodontal disease
- Patients who had orthognathic surgery
- Lingual appliance treatments
- Enamel hypoplasia, fluorosis, active caries, restorations, or fractures in the anterior teeth
- Patients who had separate arch debondings with a difference of more than 2 months in-between jaws
Studieplan
Hvordan er studiet utformet?
Designdetaljer
- Primært formål: Behandling
- Tildeling: Randomisert
- Intervensjonsmodell: Parallell tildeling
- Masking: Ingen (Open Label)
Våpen og intervensjoner
Deltakergruppe / Arm |
Intervensjon / Behandling |
|---|---|
|
Eksperimentell: Conventional Stainless Steel Fixed Retainer
Participants receive a conventional multistranded stainless steel fixed retainer bonded after orthodontic debonding.
|
Conventional 0.0215-inch six-stranded stainless steel bonded fixed retainer.
|
|
Eksperimentell: 3D-Printed Cobalt-Chromium Fixed Retainer
Participants receive a customized 3D-printed cobalt-chromium fixed retainer bonded after orthodontic debonding
|
Customized 3D-printed cobalt-chromium bonded fixed retainer fabricated from intraoral scans.
|
|
Eksperimentell: 3D-Printed Titanium Fixed Retainer
Participants receive a customized 3D-printed titanium (Ti-6Al-4V) fixed retainer bonded after orthodontic debonding.
|
Customized 3D-printed titanium (Ti-6Al-4V) bonded fixed retainer fabricated from intraoral scans.
|
Hva måler studien?
Primære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Orthodontic stability assessed using Little's Irregularity Index
Tidsramme: 12 months
|
Orthodontic stability will be assessed using Little's Irregularity Index on digital models.
The Little's Irregularity Index ranges from 0 mm to higher positive values.
A score of 0 mm indicates perfect alignment.
Higher scores indicate greater relapse, whereas lower scores indicate better orthodontic stability.
|
12 months
|
Sekundære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Retainer failure rate
Tidsramme: 12 months
|
Assessment of the failure rate of conventional stainless steel, 3D-printed cobalt-chromium, and 3D-printed titanium fixed retainers.
|
12 months
|
|
Probing Pocket Depth (PPD)
Tidsramme: 12 months
|
Assessment of periodontal pocket depth using a periodontal probe.
Pocket depth will be recorded in millimeters (mm).
Lower values indicate better periodontal health.
|
12 months
|
|
Plaque Index (Silness and Löe Plaque Index)
Tidsramme: 12 months
|
Dental plaque accumulation will be assessed using the Silness and Löe Plaque Index, which is scored from 0 to 3: 0: No plaque
Lower scores indicate better oral hygiene. |
12 months
|
|
Gingival Index (Löe and Silness Gingival Index)
Tidsramme: 12 months
|
Gingival inflammation will be assessed using the Löe and Silness Gingival Index, which is scored from 0 to 3: 0: Normal gingiva
Lower scores indicate better gingival health. |
12 months
|
|
Bleeding on Probing (BOP)
Tidsramme: 12 months
|
Assessment of bleeding on probing as an indicator of gingival inflammation.
Bleeding on probing will be assessed as the percentage of bleeding sites (0-100%).
Lower percentages indicate better periodontal health.
|
12 months
|
Samarbeidspartnere og etterforskere
Sponsor
Etterforskere
- Hovedetterforsker: Salma A daabis, BDS, Minia University
- Hovedetterforsker: Ahmed Sh Hashem, Professor, Minia University
Studierekorddatoer
Studer hoveddatoer
Studiestart (Antatt)
Primær fullføring (Antatt)
Studiet fullført (Antatt)
Datoer for studieregistrering
Først innsendt
Først innsendt som oppfylte QC-kriteriene
Først lagt ut (Faktiske)
Oppdateringer av studieposter
Sist oppdatering lagt ut (Faktiske)
Siste oppdatering sendt inn som oppfylte QC-kriteriene
Sist bekreftet
Mer informasjon
Begreper knyttet til denne studien
Nøkkelord
Ytterligere relevante MeSH-vilkår
Andre studie-ID-numre
- SDD-RCT-2026-01
Plan for individuelle deltakerdata (IPD)
Planlegger du å dele individuelle deltakerdata (IPD)?
IPD-planbeskrivelse
Legemiddel- og utstyrsinformasjon, studiedokumenter
Studerer et amerikansk FDA-regulert medikamentprodukt
Studerer et amerikansk FDA-regulert enhetsprodukt
Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .