이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

The Influence of Anatomical Characteristics and Orthodontic Force on Pulpal Oxygen Saturation: A Clinical Study Using Cone-Beam Computed Tomography (CBCT)

2026년 9월 9일 업데이트: Can Tho University of Medicine and Pharmacy

The primary objective of this clinical protocol is to evaluate and compare the physiological responses of dental pulp to two different magnitudes of orthodontic force during active orthodontic treatment. Participants are assigned to either a 150g orthodontic force group (experimental group) or a 50g orthodontic force group (active comparator group).

Orthodontic Force Application: A continuous orthodontic force of approximately 150g is applied to the target teeth in the experimental group, whereas a continuous force of approximately 50g is applied to the target teeth in the active comparator group. The magnitude of the applied force is verified using a tension gauge to ensure standardized force delivery.

Pulse Oximetry (SpO₂) Measurement: Pulp oxygen saturation (SpO₂) is assessed using the same standardized protocol in both groups. The target teeth are isolated with cotton rolls to control moisture, and the dental chair light is turned off to minimize optical interference with the pulse oximeter. Three consecutive measurements are obtained at each assessment time point, and the mean value is recorded for analysis.

This standardized protocol enables comparison of pulp oxygen saturation responses between teeth subjected to 150g and 50g orthodontic forces while minimizing variability related to force application and measurement procedures.

연구 개요

연구 유형

중재적

등록 (실제)

38

단계

  • 해당 없음

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 장소

      • Can Tho, 베트남, 900000
        • Can Tho University of Medicine and Pharmacy

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 어린이
  • 성인

건강한 자원 봉사자를 받아들입니다

예

설명

Inclusion Criteria:

  • Patients aged between 15 and 35 years old.
  • Patients undergoing routine fixed orthodontic treatment with indications for premolar extractions and subsequent canine retraction phase.
  • Target canines must be vital with healthy dental pulp and no periapical pathology.
  • Pre-existing Cone-Beam Computed Tomography (CBCT) scans of acceptable diagnostic quality available in the patient's records, taken prior to the canine retraction phase.
  • Patient or legal guardian provides written informed consent to participate in the study.

Exclusion Criteria:

  • Target canines with a history of dental trauma, extensive caries, periodontal disease, or previous endodontic treatment.
  • Patients with systemic diseases affecting peripheral blood circulation or microvasculature (e.g., cardiovascular diseases, severe anemia, diabetes, chronic respiratory conditions).
  • Patients currently using systemic vasoconstrictors or anti-inflammatory medications during the active monitoring period.
  • Pregnancy or lactation.
  • Refusal to sign the informed consent form.

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

  • 주 목적: 특수 증상
  • 할당: 무작위
  • 중재 모델: 크로스오버 할당
  • 마스킹: 하나의

무기와 개입

참가자 그룹 / 팔
개입 / 치료
실험적: 150g Orthodontic Force Group
Participants in this group receive a controlled orthodontic force of approximately 150 g applied to the target teeth. The applied force is verified using a tension gauge. Pulp oxygen saturation (SpO₂) is assessed at predefined time points. At each assessment, three consecutive measurements are obtained under moisture isolation with the dental chair light turned off to minimize optical interference, and the mean SpO₂ value is recorded.
A controlled mechanical orthodontic force of approximately 150g is applied to the target teeth and verified using a tension gauge. The force is applied to induce orthodontic tooth movement, and pulp oxygen saturation (SpO₂) is monitored at predefined follow-up time points.
활성 비교기: 50g Orthodontic Force Group
Participants in this group receive a controlled orthodontic force of approximately 50 g applied to the target teeth. The applied force is verified using a tension gauge. Pulp oxygen saturation (SpO₂) is assessed at the same predefined time points and using the same standardized measurement protocol as in the 150-g group. Three consecutive measurements are obtained at each assessment, and the mean SpO₂ value is recorded.
A controlled mechanical orthodontic force of approximately 50g is applied to the target teeth and verified using a tension gauge. The force serves as the active comparator, and pulp oxygen saturation (SpO₂) is monitored at the same predefined follow-up time points as in the 150g group.

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Changes in Dental Pulp Oxygen Saturation (SpO2) Levels
기간: Baseline (pre-force), 20 minutes, 24 hours, 7 days, and 4 weeks post-force application
Dental pulp oxygen saturation levels are measured in percentages (%) using a customized pulse oximeter probe adapted for dental use. The objective is to evaluate the physiological microcirculatory response of the canine pulp following orthodontic force application.
Baseline (pre-force), 20 minutes, 24 hours, 7 days, and 4 weeks post-force application

2차 결과 측정

결과 측정
측정값 설명
기간
Alveolar Bone and Root Anatomical Measurements on CBCT
기간: Baseline (at the time of the pre-existing CBCT scan prior to the canine retraction phase)
Three-dimensional anatomical variables are measured secondarily from pre-existing Cone-Beam Computed Tomography (CBCT) scans using specialized imaging software. Variables include cortical bone thickness (mm) at the canine apex region, root apex-to-cortical plate distance (mm), and total root length (mm). These baseline metrics will be correlated with the observed SpO2 changes.
Baseline (at the time of the pre-existing CBCT scan prior to the canine retraction phase)

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

수사관

  • 수석 연구원: Lam Nguyen Le, Assoc. Prof., Faculty of Odonto-Stomatology, Can Tho University of Medicine and Pharmacy

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2025년 5월 1일

기본 완료 (실제)

2026년 9월 1일

연구 완료 (실제)

2026년 9월 1일

연구 등록 날짜

최초 제출

2026년 6월 2일

QC 기준을 충족하는 최초 제출

2026년 6월 2일

처음 게시됨 (실제)

2026년 6월 5일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 9월 11일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 9월 9일

마지막으로 확인됨

2026년 9월 1일

추가 정보

이 연구와 관련된 용어

기타 연구 ID 번호

  • Prof. Le Nguyen Lam

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

구독하다