The Influence of Anatomical Characteristics and Orthodontic Force on Pulpal Oxygen Saturation: A Clinical Study Using Cone-Beam Computed Tomography (CBCT)
The primary objective of this clinical protocol is to evaluate and compare the physiological responses of dental pulp to two different magnitudes of orthodontic force during active orthodontic treatment. Participants are assigned to either a 150g orthodontic force group (experimental group) or a 50g orthodontic force group (active comparator group).
Orthodontic Force Application: A continuous orthodontic force of approximately 150g is applied to the target teeth in the experimental group, whereas a continuous force of approximately 50g is applied to the target teeth in the active comparator group. The magnitude of the applied force is verified using a tension gauge to ensure standardized force delivery.
Pulse Oximetry (SpO₂) Measurement: Pulp oxygen saturation (SpO₂) is assessed using the same standardized protocol in both groups. The target teeth are isolated with cotton rolls to control moisture, and the dental chair light is turned off to minimize optical interference with the pulse oximeter. Three consecutive measurements are obtained at each assessment time point, and the mean value is recorded for analysis.
This standardized protocol enables comparison of pulp oxygen saturation responses between teeth subjected to 150g and 50g orthodontic forces while minimizing variability related to force application and measurement procedures.
Studieoversikt
Status
Forhold
Intervensjon / Behandling
Studietype
Registrering (Faktiske)
Fase
- Ikke aktuelt
Kontakter og plasseringer
Studiesteder
-
-
-
Can Tho, Vietnam, 900000
- Can Tho University of Medicine and Pharmacy
-
-
Deltakelseskriterier
Kvalifikasjonskriterier
Alder som er kvalifisert for studier
- Barn
- Voksen
Tar imot friske frivillige
Beskrivelse
Inclusion Criteria:
- Patients aged between 15 and 35 years old.
- Patients undergoing routine fixed orthodontic treatment with indications for premolar extractions and subsequent canine retraction phase.
- Target canines must be vital with healthy dental pulp and no periapical pathology.
- Pre-existing Cone-Beam Computed Tomography (CBCT) scans of acceptable diagnostic quality available in the patient's records, taken prior to the canine retraction phase.
- Patient or legal guardian provides written informed consent to participate in the study.
Exclusion Criteria:
- Target canines with a history of dental trauma, extensive caries, periodontal disease, or previous endodontic treatment.
- Patients with systemic diseases affecting peripheral blood circulation or microvasculature (e.g., cardiovascular diseases, severe anemia, diabetes, chronic respiratory conditions).
- Patients currently using systemic vasoconstrictors or anti-inflammatory medications during the active monitoring period.
- Pregnancy or lactation.
- Refusal to sign the informed consent form.
Studieplan
Hvordan er studiet utformet?
Designdetaljer
- Primært formål: Diagnostisk
- Tildeling: Randomisert
- Intervensjonsmodell: Crossover-oppdrag
- Masking: Enkelt
Våpen og intervensjoner
Deltakergruppe / Arm |
Intervensjon / Behandling |
|---|---|
|
Eksperimentell: 150g Orthodontic Force Group
Participants in this group receive a controlled orthodontic force of approximately 150 g applied to the target teeth.
The applied force is verified using a tension gauge.
Pulp oxygen saturation (SpO₂) is assessed at predefined time points.
At each assessment, three consecutive measurements are obtained under moisture isolation with the dental chair light turned off to minimize optical interference, and the mean SpO₂ value is recorded.
|
A controlled mechanical orthodontic force of approximately 150g is applied to the target teeth and verified using a tension gauge.
The force is applied to induce orthodontic tooth movement, and pulp oxygen saturation (SpO₂) is monitored at predefined follow-up time points.
|
|
Aktiv komparator: 50g Orthodontic Force Group
Participants in this group receive a controlled orthodontic force of approximately 50 g applied to the target teeth.
The applied force is verified using a tension gauge.
Pulp oxygen saturation (SpO₂) is assessed at the same predefined time points and using the same standardized measurement protocol as in the 150-g group.
Three consecutive measurements are obtained at each assessment, and the mean SpO₂ value is recorded.
|
A controlled mechanical orthodontic force of approximately 50g is applied to the target teeth and verified using a tension gauge.
The force serves as the active comparator, and pulp oxygen saturation (SpO₂) is monitored at the same predefined follow-up time points as in the 150g group.
|
Hva måler studien?
Primære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Changes in Dental Pulp Oxygen Saturation (SpO2) Levels
Tidsramme: Baseline (pre-force), 20 minutes, 24 hours, 7 days, and 4 weeks post-force application
|
Dental pulp oxygen saturation levels are measured in percentages (%) using a customized pulse oximeter probe adapted for dental use.
The objective is to evaluate the physiological microcirculatory response of the canine pulp following orthodontic force application.
|
Baseline (pre-force), 20 minutes, 24 hours, 7 days, and 4 weeks post-force application
|
Sekundære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
Alveolar Bone and Root Anatomical Measurements on CBCT
Tidsramme: Baseline (at the time of the pre-existing CBCT scan prior to the canine retraction phase)
|
Three-dimensional anatomical variables are measured secondarily from pre-existing Cone-Beam Computed Tomography (CBCT) scans using specialized imaging software.
Variables include cortical bone thickness (mm) at the canine apex region, root apex-to-cortical plate distance (mm), and total root length (mm).
These baseline metrics will be correlated with the observed SpO2 changes.
|
Baseline (at the time of the pre-existing CBCT scan prior to the canine retraction phase)
|
Samarbeidspartnere og etterforskere
Etterforskere
- Hovedetterforsker: Lam Nguyen Le, Assoc. Prof., Faculty of Odonto-Stomatology, Can Tho University of Medicine and Pharmacy
Studierekorddatoer
Studer hoveddatoer
Studiestart (Faktiske)
Primær fullføring (Faktiske)
Studiet fullført (Faktiske)
Datoer for studieregistrering
Først innsendt
Først innsendt som oppfylte QC-kriteriene
Først lagt ut (Faktiske)
Oppdateringer av studieposter
Sist oppdatering lagt ut (Faktiske)
Siste oppdatering sendt inn som oppfylte QC-kriteriene
Sist bekreftet
Mer informasjon
Begreper knyttet til denne studien
Nøkkelord
Andre studie-ID-numre
- Prof. Le Nguyen Lam
Legemiddel- og utstyrsinformasjon, studiedokumenter
Studerer et amerikansk FDA-regulert medikamentprodukt
Studerer et amerikansk FDA-regulert enhetsprodukt
Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .