Denne siden ble automatisk oversatt og nøyaktigheten av oversettelsen er ikke garantert. Vennligst referer til engelsk versjon for en kildetekst.

3D-Printed PLA Guide Versus Resin Guide in Mandibular Molar Implant Placement (CGIIPMM-PLA-MR)

12. september 2026 oppdatert av: Mohamed Esmail Ahmed Hassan

Computer Guided Immediate Implant Placement in Mandibular Molars Using Patient Specific 3D Printed Polylactic Acid Guide Versus Modified Resin Guide

This randomized clinical trial compares two tooth-supported computer-guided surgical guide systems for immediate implant placement in mandibular molar extraction sockets: a patient-specific 3D-printed PLA guide system and a modified resin guide system. The study evaluates implant positioning accuracy, primary implant stability, and surgical time.

Studieoversikt

Status

Fullført

Forhold

Intervensjon / Behandling

Detaljert beskrivelse

This randomized clinical trial compares two tooth-supported computer-guided surgical guide systems for immediate implant placement in mandibular molar extraction sockets: a patient-specific 3D-printed polylactic acid (PLA) guide system and a modified resin guide system. Preoperative CBCT and digital intraoral scans were used for prosthetically driven virtual implant planning and fabrication of the surgical guides.

Implant positioning accuracy was assessed by comparing the planned and actual implant positions using preoperative and postoperative CBCT datasets. Angular deviation, coronal deviation at the implant platform, and apical deviation were recorded.

Primary implant stability was assessed immediately after implant placement using Implant Stability Quotient (ISQ) measurements obtained with an Osstell device. Surgical time was recorded from seating of the surgical guide and initiation of osteotomy until completion of implant insertion.

The study was designed to compare the performance of the two guide systems in immediate mandibular molar implant placement.

Studietype

Intervensjonell

Registrering (Faktiske)

20

Fase

  • Ikke aktuelt

Kontakter og plasseringer

Denne delen inneholder kontaktinformasjon for de som utfører studien, og informasjon om hvor denne studien blir utført.

Studiesteder

  • Egypt
    • New Cairo
      • Cairo, New Cairo, Egypt, 11511
        • Future University in Egypt (FUE)

Deltakelseskriterier

Forskere ser etter personer som passer til en bestemt beskrivelse, kalt kvalifikasjonskriterier. Noen eksempler på disse kriteriene er en persons generelle helsetilstand eller tidligere behandlinger.

Kvalifikasjonskriterier

Alder som er kvalifisert for studier

  • Voksen

Tar imot friske frivillige

Nei

Beskrivelse

Inclusion Criteria:

  • Age 20-50 years.
  • Non-restorable mandibular first molar indicated for extraction.
  • Sufficient bony support for implant placement without the need for significant bone augmentation.
  • Good oral hygiene and motivation.
  • Adequate prosthetic space.
  • Ability and willingness to undergo the surgical procedure and follow-up.
  • Suitable for computer-guided, tooth-supported implant placement.

Exclusion Criteria:

  • Uncontrolled systemic diseases that may impair healing (e.g., uncontrolled diabetes or hypertension).
  • Severe periodontal disease.
  • Patients undergoing chemotherapy or radiotherapy.
  • Insufficient prosthetic space.
  • Heavy smokers.

Studieplan

Denne delen gir detaljer om studieplanen, inkludert hvordan studien er utformet og hva studien måler.

Hvordan er studiet utformet?

Designdetaljer

  • Primært formål: Behandling
  • Tildeling: Randomisert
  • Intervensjonsmodell: Parallell tildeling
  • Masking: Enkelt

Våpen og intervensjoner

Deltakergruppe / Arm
Intervensjon / Behandling
Eksperimentell: patient specific 3d printed PLA guide
Immediate implant placement in mandibular molar extraction sockets using a patient-specific tooth-supported 3D-printed PLA surgical guide system. Preoperative CBCT and digital intraoral scans were used for prosthetically driven virtual implant planning and guide fabrication. The guide was fabricated from PLA according to the planned implant position. Following atraumatic tooth extraction and socket preparation, the guide was seated and osteotomy preparation was performed through the guide's guiding channel according to the planned trajectory, followed by immediate implant insertion. Primary implant stability was assessed using an Osstell device and Implant Stability Quotient (ISQ) measurements.
Fremgangsmåte: immediate implant placement using PLA guide
Preoperative virtual planning was performed using CBCT data and digital intraoral scans. The datasets were used for prosthetically driven implant planning and fabrication of a patient-specific 3D-printed PLA surgical guide. Following atraumatic tooth extraction and socket preparation, the guide was seated and osteotomy preparation was performed through the guiding channel according to the planned implant position and trajectory. The implant was then immediately inserted. Primary implant stability was assessed using an Osstell device and Implant Stability Quotient (ISQ) measurements.
Aktiv komparator: Modified Resin guide
Immediate implant placement in mandibular molar extraction sockets using a tooth-supported modified resin surgical guide system. Preoperative CBCT and digital intraoral scans were used for prosthetically driven virtual implant planning and guide fabrication. The guide was fabricated from light-cured surgical-guide resin according to the planned implant position. Following atraumatic tooth extraction and socket preparation, the guide was seated and osteotomy preparation was performed through the guide's guiding channel according to the planned trajectory, followed by immediate implant insertion. Primary implant stability was assessed using an Osstell device and Implant Stability Quotient (ISQ) measurements.
Fremgangsmåte: Immediate implant placement using Modified resin guide.
Preoperative virtual planning was performed using CBCT data and digital intraoral scans. The datasets were used for prosthetically driven implant planning and fabrication of a tooth-supported modified resin surgical guide. Following atraumatic tooth extraction and socket preparation, the guide was seated and osteotomy preparation was performed through the guiding channel according to the planned implant position and trajectory. The implant was then immediately inserted. Primary implant stability was assessed using an Osstell device and Implant Stability Quotient (ISQ) measurements.

Hva måler studien?

Primære resultatmål

Resultatmål
Tiltaksbeskrivelse
Tidsramme
accuracy of implant position
Tidsramme: Assessed within 1 week postoperatively, following acquisition of the postoperative CBCT scan.
Accuracy of implant placement will be evaluated by comparing the planned implant position from the preoperative digital plan with the actual implant position obtained from the postoperative CBCT scan. Deviations will be assessed in three dimensions, including angular deviation (degrees), coronal deviation (platform) (mm), and apical deviation (mm). Measurements will be performed using specialized implant-planning software by superimposing the preoperative and postoperative datasets. Lower deviation values indicate greater agreement between the planned and actual implant positions.
Assessed within 1 week postoperatively, following acquisition of the postoperative CBCT scan.

Sekundære resultatmål

Resultatmål
Tiltaksbeskrivelse
Tidsramme
primary implant stability by osstell
Tidsramme: Measured immediately at the time of implant placement during the surgical procedure.
Primary implant stability will be assessed using an Osstell device, which measures Implant Stability Quotient (ISQ) values through resonance frequency analysis. A SmartPeg will be attached to the implant, and ISQ readings will be taken in two perpendicular directions (buccolingual and mesiodistal). Higher ISQ values indicate greater mechanical stability. The mean ISQ value for each implant will be recorded and used for analysis
Measured immediately at the time of implant placement during the surgical procedure.
surgical time
Tidsramme: Assessed intraoperatively, measured during the surgical appointment, and recorded immediately after surgery
Surgical time will be recorded to evaluate the procedural efficiency of guided immediate implant placement. Time will be measured from seating of the surgical guide and initiation of osteotomy until completion of implant insertion. The total duration will be recorded in minutes.
Assessed intraoperatively, measured during the surgical appointment, and recorded immediately after surgery

Samarbeidspartnere og etterforskere

Det er her du vil finne personer og organisasjoner som er involvert i denne studien.

Sponsor

Mohamed Esmail Ahmed Hassan

Publikasjoner og nyttige lenker

Den som er ansvarlig for å legge inn informasjon om studien leverer frivillig disse publikasjonene. Disse kan handle om alt relatert til studiet.

Generelle publikasjoner

Studierekorddatoer

Disse datoene sporer fremdriften for innsending av studieposter og sammendragsresultater til ClinicalTrials.gov. Studieposter og rapporterte resultater gjennomgås av National Library of Medicine (NLM) for å sikre at de oppfyller spesifikke kvalitetskontrollstandarder før de legges ut på det offentlige nettstedet.

Studer hoveddatoer

Studiestart (Faktiske)

2. november 2025

Primær fullføring (Faktiske)

10. august 2026

Studiet fullført (Faktiske)

10. september 2026

Datoer for studieregistrering

Først innsendt

12. september 2026

Først innsendt som oppfylte QC-kriteriene

12. september 2026

Først lagt ut (Faktiske)

17. september 2026

Oppdateringer av studieposter

Sist oppdatering lagt ut (Faktiske)

17. september 2026

Siste oppdatering sendt inn som oppfylte QC-kriteriene

12. september 2026

Sist bekreftet

1. september 2026

Mer informasjon

Begreper knyttet til denne studien

Nøkkelord

Andre studie-ID-numre

  • FUE.REC(78)/10-2025

Plan for individuelle deltakerdata (IPD)

Planlegger du å dele individuelle deltakerdata (IPD)?

NEI

IPD-planbeskrivelse

Individual participant data will not be shared because of participant privacy and confidentiality considerations. Only aggregate study results will be reported.

Legemiddel- og utstyrsinformasjon, studiedokumenter

Studerer et amerikansk FDA-regulert medikamentprodukt

Nei

Studerer et amerikansk FDA-regulert enhetsprodukt

Nei

Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .

Abonnere