Esta página se tradujo automáticamente y no se garantiza la precisión de la traducción. por favor refiérase a versión inglesa para un texto fuente.

Ejercicio FIT en 30 días de desuso muscular inducido por ULLS

4 de noviembre de 2026 actualizado por: Lance Bollinger

Uso del monitoreo de velocidad para prescribir cargas de trabajo de entrenamiento inercial (FIT) basadas en volantes apropiadas para ejercicios en vuelos espaciales

This study aims to determine how flywheel-based inertial training (FIT) implemented according to principles of velocity-based training (VBT) and High-Intensity Interval Training (HIIT) affects disuse-induced physical de-conditioning including loss of voluntary muscle strength, aerobic capacity, and balance regulation.

Descripción general del estudio

Estado

Terminado

Descripción detallada

The primary objectives of this project are:

  1. To assess how 30d of unilateral lower limb suspension (ULLS) with and without FIT exercise affects voluntary and electrically-evoked twitch force, motor unit recruitment, and anisotropic measures.
  2. To determine how muscle anisotropy (assessed through diffusion tensor imaging) and motor unit action potential train (MUAPT) characteristics relate to contractile function in loaded and unloaded limbs

Secondary objectives include:

  1. To assess impact of ULLS with and without FIT on aerobic capacity
  2. To assess impact of ULLS with and without FIT on balance regulation during single-leg stance

This study aims to recruit 10 healthy, physically active participants (both male and female). Participants will undergo 30d of ULLS to unload the left limb during daily living activities. Subjects will wear a specially modified shoe with a 5cm rocker-style stack on the right leg and ambulate using crutches. Participants will be randomly assigned to either a control or exercise group. Those in the exercise group will perform Flywheel-based Inertial Training (FIT) leg press three times per week. Moment of inertia of the flywheel will be adjusted to elicit movement speeds of 0.4 m/s for resistance training (four sets of 10 repetitions). For High Intensity Interval Training, flywheel moment of inertia will be adjusted to elicit movement speed of 1.0m/s during upright squats (four sets of 3 min).

Before and after the intervention, subjects will complete a series of tests including:

  1. Body Composition - height, weight, waist circumference, and tetrapolar bioelectrical impedance analysis will be conducted.
  2. Balance assessment - center of pressure will be assessed using portable force decks during single leg stance with eyes open and closed. This test will be repeated in the shod and unshod conditions. MUAPT data (high density surface electromyography) will be collected for the soleus and tibialis anterior during this test.
  3. Aerobic capacity test - VO2max will be determined during a graded exercise test on a cycle ergometer (3 min per stage). Gas exchange and heart rate data will be collected continuously throughout the test. Pedal force will also be assessed. Additional outcomes such as ventilatory threshold and substrate utilization will be assessed.
  4. Muscle Imaging - Diffusion tensor imaging (DTI), a magnetic resonance technique will be used to assess anisotropic measures, muscle volume, fascicle length, and fascicle orientation of the mid-thigh.
  5. Muscle strength testing - Maximal voluntary isometric and isokinetic strength of the knee extensors, flexors, and ankle plantar- and dorsi-flexors will be assessed. Interpolated twitch (electrical stimulation of the femoral nerve) will be used to assess twitch characteristics and voluntary activation of the quadriceps

Tipo de estudio

Intervencionista

Inscripción (Actual)

29

Fase

  • No aplica

Contactos y Ubicaciones

Esta sección proporciona los datos de contacto de quienes realizan el estudio e información sobre dónde se lleva a cabo este estudio.

Ubicaciones de estudio

    • Kentucky
      • Lexington, Kentucky, Estados Unidos, 40506
        • University of Kentucky

Criterios de participación

Los investigadores buscan personas que se ajusten a una determinada descripción, denominada criterio de elegibilidad. Algunos ejemplos de estos criterios son el estado de salud general de una persona o tratamientos previos.

Criterio de elegibilidad

Edades elegibles para estudiar

35 años a 45 años (Adulto)

Acepta Voluntarios Saludables

Sí

Géneros elegibles para el estudio

Todos

Descripción

Inclusion Criteria:

  • Regularly engaging in aerobic exercise (> 150min/wk) and resistance exercise (>1 time per week) for the past 12 months
  • Education greater than or equal to bachelor's degree (any field)

Exclusion Criteria:

  • Waist circumference < 55cm or > 90cm (F) and < 75cm or > 100cm (M)
  • Body mass index < 18.5 or > 29.9
  • Not regularly engaging in exercise for previous 12 months
  • Tobacco use within previous 6 months
  • Blood clotting disorder
  • Implanted device which could negatively be affected by electrical impulse or strong magnetic field such as pacemaker, internal defibrillator, or cochlear implant
  • Diagnosed cardiovascular, pulmonary, renal, or metabolic disease
  • Pregnancy (within previous 6 months)
  • High resting blood pressure (>140 systolic and/or > 90 diastolic)
  • Low back or leg injury in previous 6 months
  • Currently taking medication to assist with sleep
  • Muscle, bone, or joint injury that limits physical activity within previous 6 months
  • Neurological disorder which affects balance (such as multiple sclerosis or Parkinson's disease)

Plan de estudios

Esta sección proporciona detalles del plan de estudio, incluido cómo está diseñado el estudio y qué mide el estudio.

¿Cómo está diseñado el estudio?

Detalles de diseño

  • Propósito principal: Tratamiento
  • Asignación: Aleatorizado
  • Modelo Intervencionista: Asignación paralela
  • Enmascaramiento: Ninguno (etiqueta abierta)

Armas e Intervenciones

Grupo de participantes/brazo
Intervención / Tratamiento
Comparador activo: No Exercise

Participants will undergo a 30d Unilateral Lower Limb Suspension (ULLS) without exercise

Participants will ambulate unilaterally using a shoe modified with a 5cm rocker-style stack and forearm crutches for the duration of the study.

All participants will complete two testing sessions prior to ULLS, one testing session at day 13, and two testing sessions at the end of the study.

Experimental: velocity-based FIT (VBFIT)

Participants will undergo a 30d Unilateral Lower Limb Suspension (ULLS) with exercise

Participants will ambulate unilaterally using a shoe modified with a 5cm rocker-style stack and forearm crutches for the duration of the study.

All participants will complete two testing sessions prior to ULLS, one testing session at day 13, and two testing sessions at the end of the study. Those assigned to the exercise group will perform a both high-intensity resistance and aerobic exercise three times per week

¿Qué mide el estudio?

Medidas de resultado primarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Voluntary activation
Periodo de tiempo: Baseline, day 13, and day 30

Voluntary activation of the quadriceps will be assessed with electrical stimulation of the femoral nerve before, during, and after a maximal voluntary isometric contraction (MVIC) using the interpolated twitch technique.

Baseline, day 13, and day 30
Twitch Properties-Electromechanical Delay
Periodo de tiempo: Baseline, day 13, and day 30

Electromechanical delay will be calculated as the time difference between the onset of electrical impulse and onset of torque development during femoral nerve stimulation. This will be measured before and after a maximal voluntary isometric contraction.

Baseline, day 13, and day 30
Twitch Properties-Rate of Torque Development
Periodo de tiempo: Baseline, day 13, and day 30

Rate of Torque Development will be calculated as the change in torque divided by the change in time in the linear phase between 20 and 80% of peak twitch torque during femoral nerve stimulation. This will be measured before and after a maximal voluntary isometric contraction.

Baseline, day 13, and day 30
Twitch Properties-Time to peak Tension
Periodo de tiempo: Baseline, day 13, and day 30

Time to peak tension will be calculated as the time difference between the onset of electrical impulse and peak twitch torque during femoral nerve stimulation. This will be measured before and after a maximal voluntary isometric contraction.

Baseline, day 13, and day 30
Twitch Properties-Peak Twitch Torque
Periodo de tiempo: Baseline, day 13, and day 30

Peak twitch torque during femoral nerve stimulation will be calculated as the highest torque output immediately (approximately 200ms) following femoral nerve stimulation. This will be measured before and after a maximal voluntary isometric contraction.

Baseline, day 13, and day 30
Twitch Properties-Relaxation Rate
Periodo de tiempo: Baseline, day 13, and day 30

Relaxation rate will be calculated as the change in torque divided by the change in time during the relaxation phase of twitch following femoral nerve stimulation. This will be measured before and after a maximal voluntary isometric contraction.

Baseline, day 13, and day 30
Post activation Potentiation
Periodo de tiempo: Baseline, day 13, and day 30

Post-activation will be calculated as the percentage difference in peak twitch torque in femoral nerve stimulation before and after a maximal voluntary isometric contraction.

Baseline, day 13, and day 30
Motor unit action potential train (MUAPT) firing rate
Periodo de tiempo: Baseline, day 13, and day 30

Firing rate of individual motor units of the vastus lateralis (VL) will be assessed with high density surface electromyography (EMG) using four-pin high density surface electromyography electrodes. Firing rate at 30, 60, and 90% MVIC will be reported. Motor unit firing rate will also be reported during static stance.

Participants will use a screen displaying real-time torque output. Participants will voluntarily increase torque (5 seconds), hold at a pre-determined torque level (10 seconds), and gradually reduce force back to resting (5 seconds) with the knee held in a fixed position. This test will be completed with a 10s isometric hold at 30, 60, and 90% of maximal voluntary isometric force.

Baseline, day 13, and day 30
Motor unit action potential train (MUAPT) recruitment threshold.
Periodo de tiempo: Baseline, day 13, and day 30

Recruitment threshold of individual motor units of the VL will be assessed with high density surface electromyography using four-pin high density surface electromyography electrodes. Recruitment threshold will be measured during isometric ramp contractions of the quadriceps

Participants will use a screen displaying real-time torque output. Participants will voluntarily increase torque (5 seconds), hold at a pre-determined torque level (10 seconds), and gradually reduce force back to resting (5 seconds) with the knee held in a fixed position. This test will be completed with a 10s isometric hold at 30, 60, and 90% of maximal voluntary isometric force.

Baseline, day 13, and day 30
Motor unit action potential train (MUAPT) de-recruitment threshold.
Periodo de tiempo: Baseline, day 13, and day 30

De-recruitment threshold of individual motor units f the VL will be assessed with high density surface electromyography using four-pin high density surface electromyography electrodes. Recruitment threshold will be measured during isometric ramp contractions of the quadriceps

Participants will use a screen displaying real-time torque output. Participants will voluntarily increase torque (5 seconds), hold at a pre-determined torque level (10 seconds), and gradually reduce force back to resting (5 seconds) with the knee held in a fixed position. This test will be completed with a 10s isometric hold at 30, 60, and 90% of maximal voluntary isometric force.

Baseline, day 13, and day 30
Muscle size
Periodo de tiempo: Baseline and day 30

Muscle size will be measured by MRI. Anatomical MRI scans will allow for assessment of anatomical cross sectional area.

Baseline and day 30
Muscle Physiological cross-sectional area
Periodo de tiempo: Baseline and day 30

Diffusion tensor imaging (DTI) will be used to assess muscle volume and fascicle length. Physiological cross-sectional area will be calculated as Muscle volume divided by fascicle length.

Baseline and day 30
Muscle Fractional Anisotropy
Periodo de tiempo: Baseline and day 30

Diffusion tensor imaging (DTI) will be used to assess anisotropic measures. A ratio of the diffusivity in the principal planes will be used to calculate fractional anisotropy.

Baseline and day 30
Muscle Diffusion properties
Periodo de tiempo: Baseline and day 30

Diffusion tensor imaging (DTI) will be used to assess rate of water diffusion in three principal planes. We will report rates of water diffusion in three ways: 1) mean diffusivity (average rate in all three plane), 2) axial diffusivity (rate of diffusion along primary axis), and 3) radial diffusivity (rate of diffusion perpendicular to the primary axis).

Baseline and day 30
Muscle cross-sectional area (Ultrasound)
Periodo de tiempo: Baseline, day 13, and day 30

cross-sectional area of the vastus lateralis and rectus femoris will be measured by ultrasonography

Baseline, day 13, and day 30
Fascicle length
Periodo de tiempo: Baseline, day 13, and day 30

Panoramic views of the mid-portion of the VL will be measured by ultrasonography

Baseline, day 13, and day 30
Pennation angle
Periodo de tiempo: Baseline, day 13, and day 30

Pennation angle of the mid-portion of the vastus lateralis will be assessed by ultrasonography

Baseline, day 13, and day 30
Voluntary Isokinetic Muscle Strength
Periodo de tiempo: Baseline, day 13, and day 30

Maximal voluntary isokinetic concentric strength of the knee extensors/flexors and ankle dorsi-/plantar-flexors will be assessed at 60 deg/s

Baseline, day 13, and day 30
Voluntary Isometric Muscle Strength
Periodo de tiempo: Baseline, day 13, and day 30

Maximal voluntary isometric strength of the knee extensors/flexors and ankle dorsi-/plantar-flexors will be assessed during a (10 seconds) maximal effort contraction.

Baseline, day 13, and day 30

Medidas de resultado secundarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Aerobic Capacity
Periodo de tiempo: Baseline and day 30

Subjects will complete a VO2max exercise test on a stationary bicycle. Gas exchange and heart rate data will be collected continuously. Initial workload will be set at approximately 2 METS. Every three minutes, we will add more resistance to the pedals (~1.5 METS). Subjects will continue to pedal until they can either not maintain pedal speed (50RPM) or until a plateau in VO2 occurs. Pedal force for each limb will be assessed.

Baseline and day 30
Ventilatory Threshold
Periodo de tiempo: Baseline and day 30

Gas exchange data from the aerobic capacity test (VO2, ventilation; VE, and VCO2) will be used to calculate ventilatory threshold during exercise

Baseline and day 30
Substrate utilization
Periodo de tiempo: Baseline and day 30

Gas exchange data from the aerobic capacity test (VO2, respiratory exchange ratio; RER, and VCO2) will be used to calculate substrate utilization (energy expenditure, carbohydrate use, and fatty acid oxidation) at varying exercise intensities

Baseline and day 30
Body Composition
Periodo de tiempo: Baseline and day 30

Bioelectrical Impedance Analysis (BIA) will be used to assess body composition. Subjects will lie supine and have small adhesive electrodes placed on the right hand, wrist, ankle, and foot. A small (imperceptible) electrical current will be delivered to one electrode and the amount of resistance to the electrical current will be used to measure body composition. Percent body fat will be measured. Muscle mass will be calculated using previously established formulae.

Baseline and day 30
Postural sway area
Periodo de tiempo: Baseline, day 13, and day 30

Subjects will complete a series of balance assessments while standing on one leg using a dual force plate system. Subjects will stand still on one leg for 15 seconds with hands on hips. This will be repeated on both legs with eyes open and with eyes closed in the shod and unshod conditions in random order. Postural sway area will be calculated as an index of postural control.

Baseline, day 13, and day 30
Postural Sway Velocity
Periodo de tiempo: Baseline, day 13, and day 30

Subjects will complete a series of balance assessments while standing on one leg using a dual force plate system. Subjects will stand still on one leg for 15 seconds with hands on hips. This will be repeated on both legs with eyes open and with eyes closed in the shod and unshod conditions in random order. Mean Postural sway velocity will be calculated as an index of postural control.

Baseline, day 13, and day 30
Motor unit firing rate - single leg stance
Periodo de tiempo: Baseline, day 13, and day 30

Subjects will complete a series of balance assessments while standing on one leg using a dual force plate system. Subjects will stand still on one leg for 15 seconds with hands on hips. This will be repeated on both legs with eyes open and with eyes closed in the shod and unshod conditions in random order.

High density surface EMG sensors will be adhered to the skin over the tibialis anterior and soleus muscles with double-sided tape. Exponential functions will be fit to describe the relationship between motor unit firing rate and action potential amplitude on an individual manner to determine how firing rates of various motor unit pools relate to postural control.

Baseline, day 13, and day 30
Change in heart rate at rest
Periodo de tiempo: Baseline and day 30

heart rate measured

Baseline and day 30
Change in blood pressure at rest
Periodo de tiempo: Baseline and day 30

blood pressure measured at the arm

Baseline and day 30
Change in heart rate variability
Periodo de tiempo: Baseline and day 30

for 20 minutes electrodes will be placed on the skin of the chest and a respiratory belt will be wrapped around the chest and blood pressure will be taken at the arm. During the final 10 minutes, 5 minutes of regular breathing (minutes 11-15), and 5 minutes of controlled breathing at a rate of 12 breaths per minute will be done. Resting heart rate (throughout), respiratory rate (throughout) and blood pressure (min 15 and 20) will be collected.

Baseline and day 30
Change in heart rate recovery after exercise
Periodo de tiempo: Baseline and day 30

a maximal-effort exercise test on a stationary bicycle will be done. Immediately upon finishing the cycling, participants will rest on the bike for 5 minutes while remaining as still as possible. Heart rate will be collected throughout the this time to give a measure of heart rate recovery

Baseline and day 30

Colaboradores e Investigadores

Aquí es donde encontrará personas y organizaciones involucradas en este estudio.

Patrocinador

Investigadores

  • Investigador principal: Lance Bollinger, PhD, University of Kentucky

Fechas de registro del estudio

Estas fechas rastrean el progreso del registro del estudio y los envíos de resultados resumidos a ClinicalTrials.gov. Los registros del estudio y los resultados informados son revisados ​​por la Biblioteca Nacional de Medicina (NLM) para asegurarse de que cumplan con los estándares de control de calidad específicos antes de publicarlos en el sitio web público.

Fechas importantes del estudio

Inicio del estudio (Actual)

23 de octubre de 2024

Finalización primaria (Actual)

31 de agosto de 2026

Finalización del estudio (Actual)

31 de agosto de 2026

Fechas de registro del estudio

Enviado por primera vez

24 de septiembre de 2024

Primero enviado que cumplió con los criterios de control de calidad

5 de octubre de 2024

Publicado por primera vez (Actual)

8 de octubre de 2024

Actualizaciones de registros de estudio

Última actualización publicada (Actual)

6 de noviembre de 2026

Última actualización enviada que cumplió con los criterios de control de calidad

4 de noviembre de 2026

Última verificación

1 de octubre de 2026

Más información

Términos relacionados con este estudio

Plan de datos de participantes individuales (IPD)

¿Planea compartir datos de participantes individuales (IPD)?

NO

Información sobre medicamentos y dispositivos, documentos del estudio

Estudia un producto farmacéutico regulado por la FDA de EE. UU.

No

Estudia un producto de dispositivo regulado por la FDA de EE. UU.

No

Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .

Suscribir