Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch Mode With or Without Bioglass

6 janvier 2019 mis à jour par: Cristina Pasarín Linares, University of Valencia

Randomized Blind Clinical Trial, Four-armed Parallel of Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch With or Without Bioglass

Composite restoration of non-carious cervical lesions has always been a challenge for the clinician, considering that the most frequent cause of failure is retention loss.

Adhesion of composite restoration may be obtained by following four different etching techniques: total-etch in three steps, total-etch in two steps, self-etch in two steps, and self-etch in one step. Nowadays the tendency is to simplify the adhesive classic protocols. With the introduction of universal adhesives such as Prime&Bond Active (Dentsply Sirona) it is possible to obtain a total-etch pattern (enamel and dentine) without the classic etching technique with orthophosphoric acid.

On the other hand, there has been an increase in the awareness of the importance of remaining dental tissue preservation, avoiding preparation of a cavity. This is why it is now preferable to use bioactive glass in order to increase micromechanical retention on the dental surface, instead of the classical approach of preparing the surface with burs.

To date, there are no studies evaluating the clinical performance of the universal adhesive Prime&Bond Active on direct resin composite restoration of non-carious cervical lesions neither in a selective-etch mode (enamel etching) or a self-etch mode (no etching) or using sandblasting with bioactive glass. Therefore, the main objective of the study is to evaluate the retention rate of composite restorations using Prime&Bond Active and a previous sandblasted surface with bioglass in a three-year follow-up, as well as the presence of marginal discoloration, marginal integrity and marginal caries.

Aperçu de l'étude

Description détaillée

The protocol to be followed in the study is as follows:

  1. Obtention of a written informed consent of all participants.
  2. Complete medical and dental clinical record.
  3. Administration of anesthesia and absolute rubber dam isolation.
  4. Cavity cleaning with a prophylactic brush and rubber cup with pumice.
  5. Randomly assigning each non-carious cervical lesion to one of the four experimental groups:

    5.1. Selective enamel etching and surface roughening with bioglass 5.2. Selective enamel etching without surface roughening. 5.3. Self-etch and surface roughening with bioglass. 5.4. Self-etch without surface roughening.

  6. In experimental groups which need surface roughening (group 5.1 and 5.3), sandblasting with bioactive glass will be used in enamel.
  7. In experimental groups with selective enamel etch (5.1 and 5.2), 37 % orthophosphoric acid is applied for 15 seconds in enamel, followed by profuse washing with air/water spray for ten seconds and dried using air for 10 seconds without desiccating dentin.

    In groups 5.3 and 5.4 this step is omitted.

  8. Application of universal adhesive Prime&Bond Active on enamel and dentin for 20 seconds. Subsequently, evaporation of the solvent is realized by applying air for 5 seconds and then light curing for 20 seconds.
  9. Application of a "bulk fill" composite resin and light curing, following manufacturer's instructions.
  10. Finishing and polishing of the restoration.
  11. Monitoring and follow up: visits will be performed at six months, one year, two years and three years. In each evaluation, two independent clinicians who do not participate in the clinical procedures will evaluate each direct composite restoration according to USPHS criteria (Modified United States Public Health Service).

The primary objective is to evaluate the retention of the restoration. The secondary objectives are to evaluate marginal discoloration, marginal integrity and marginal caries.

Type d'étude

Interventionnel

Inscription (Anticipé)

228

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Lieux d'étude

      • Valencia, Espagne
        • University of Valencia

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

18 ans à 70 ans (Adulte, Adulte plus âgé)

Accepte les volontaires sains

Non

Sexes éligibles pour l'étude

Tout

La description

Inclusion Criteria:

  1. Patients ≥ 18 years without systemic disease.
  2. Presence of a non-carious cervical lesion with a minimum of 1.5 mm in depth and extent to dentin.
  3. Non-carious cervical lesions in premolars and molars.

Exclusion Criteria:

  1. Presence of rampant caries or advanced periodontal disease.
  2. Consumption of > 2 cigarette pack/ day.
  3. Presence of severe xerostomia or bruxism.
  4. Methacrylate allergy.
  5. Pregnancy.

Teeth with pulpal and/or periapical pathology, and endodontically treated teeth are excluded from the study.

Teeth with previous pulp capping or previous class V restorations will also be excluded.

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Traitement
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation parallèle
  • Masquage: Double

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: Selective-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Comparateur actif: Selective-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Expérimental: Self-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Comparateur actif: Self-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Retention rate
Délai: Three years
Presence of resin composite restorations of non-carious cervical lesions at the three-year follow-up examination.
Three years

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Marginal discoloration
Délai: Three years
Presence of marginal staining between the restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal integrity
Délai: Three years
The quality of the interface between restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal caries
Délai: Three years
The presence of clinical diagnosis of caries will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

19 novembre 2018

Achèvement primaire (Anticipé)

1 novembre 2019

Achèvement de l'étude (Anticipé)

1 novembre 2021

Dates d'inscription aux études

Première soumission

18 novembre 2018

Première soumission répondant aux critères de contrôle qualité

6 janvier 2019

Première publication (Réel)

9 janvier 2019

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

9 janvier 2019

Dernière mise à jour soumise répondant aux critères de contrôle qualité

6 janvier 2019

Dernière vérification

1 janvier 2019

Plus d'information

Termes liés à cette étude

Termes MeSH pertinents supplémentaires

Autres numéros d'identification d'étude

  • 2/2018

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner