Esta página se tradujo automáticamente y no se garantiza la precisión de la traducción. por favor refiérase a versión inglesa para un texto fuente.

Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch Mode With or Without Bioglass

6 de enero de 2019 actualizado por: Cristina Pasarín Linares, University of Valencia

Randomized Blind Clinical Trial, Four-armed Parallel of Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch With or Without Bioglass

Composite restoration of non-carious cervical lesions has always been a challenge for the clinician, considering that the most frequent cause of failure is retention loss.

Adhesion of composite restoration may be obtained by following four different etching techniques: total-etch in three steps, total-etch in two steps, self-etch in two steps, and self-etch in one step. Nowadays the tendency is to simplify the adhesive classic protocols. With the introduction of universal adhesives such as Prime&Bond Active (Dentsply Sirona) it is possible to obtain a total-etch pattern (enamel and dentine) without the classic etching technique with orthophosphoric acid.

On the other hand, there has been an increase in the awareness of the importance of remaining dental tissue preservation, avoiding preparation of a cavity. This is why it is now preferable to use bioactive glass in order to increase micromechanical retention on the dental surface, instead of the classical approach of preparing the surface with burs.

To date, there are no studies evaluating the clinical performance of the universal adhesive Prime&Bond Active on direct resin composite restoration of non-carious cervical lesions neither in a selective-etch mode (enamel etching) or a self-etch mode (no etching) or using sandblasting with bioactive glass. Therefore, the main objective of the study is to evaluate the retention rate of composite restorations using Prime&Bond Active and a previous sandblasted surface with bioglass in a three-year follow-up, as well as the presence of marginal discoloration, marginal integrity and marginal caries.

Descripción general del estudio

Descripción detallada

The protocol to be followed in the study is as follows:

  1. Obtention of a written informed consent of all participants.
  2. Complete medical and dental clinical record.
  3. Administration of anesthesia and absolute rubber dam isolation.
  4. Cavity cleaning with a prophylactic brush and rubber cup with pumice.
  5. Randomly assigning each non-carious cervical lesion to one of the four experimental groups:

    5.1. Selective enamel etching and surface roughening with bioglass 5.2. Selective enamel etching without surface roughening. 5.3. Self-etch and surface roughening with bioglass. 5.4. Self-etch without surface roughening.

  6. In experimental groups which need surface roughening (group 5.1 and 5.3), sandblasting with bioactive glass will be used in enamel.
  7. In experimental groups with selective enamel etch (5.1 and 5.2), 37 % orthophosphoric acid is applied for 15 seconds in enamel, followed by profuse washing with air/water spray for ten seconds and dried using air for 10 seconds without desiccating dentin.

    In groups 5.3 and 5.4 this step is omitted.

  8. Application of universal adhesive Prime&Bond Active on enamel and dentin for 20 seconds. Subsequently, evaporation of the solvent is realized by applying air for 5 seconds and then light curing for 20 seconds.
  9. Application of a "bulk fill" composite resin and light curing, following manufacturer's instructions.
  10. Finishing and polishing of the restoration.
  11. Monitoring and follow up: visits will be performed at six months, one year, two years and three years. In each evaluation, two independent clinicians who do not participate in the clinical procedures will evaluate each direct composite restoration according to USPHS criteria (Modified United States Public Health Service).

The primary objective is to evaluate the retention of the restoration. The secondary objectives are to evaluate marginal discoloration, marginal integrity and marginal caries.

Tipo de estudio

Intervencionista

Inscripción (Anticipado)

228

Fase

  • No aplica

Contactos y Ubicaciones

Esta sección proporciona los datos de contacto de quienes realizan el estudio e información sobre dónde se lleva a cabo este estudio.

Ubicaciones de estudio

      • Valencia, España
        • University of Valencia

Criterios de participación

Los investigadores buscan personas que se ajusten a una determinada descripción, denominada criterio de elegibilidad. Algunos ejemplos de estos criterios son el estado de salud general de una persona o tratamientos previos.

Criterio de elegibilidad

Edades elegibles para estudiar

18 años a 70 años (Adulto, Adulto Mayor)

Acepta Voluntarios Saludables

No

Géneros elegibles para el estudio

Todos

Descripción

Inclusion Criteria:

  1. Patients ≥ 18 years without systemic disease.
  2. Presence of a non-carious cervical lesion with a minimum of 1.5 mm in depth and extent to dentin.
  3. Non-carious cervical lesions in premolars and molars.

Exclusion Criteria:

  1. Presence of rampant caries or advanced periodontal disease.
  2. Consumption of > 2 cigarette pack/ day.
  3. Presence of severe xerostomia or bruxism.
  4. Methacrylate allergy.
  5. Pregnancy.

Teeth with pulpal and/or periapical pathology, and endodontically treated teeth are excluded from the study.

Teeth with previous pulp capping or previous class V restorations will also be excluded.

Plan de estudios

Esta sección proporciona detalles del plan de estudio, incluido cómo está diseñado el estudio y qué mide el estudio.

¿Cómo está diseñado el estudio?

Detalles de diseño

  • Propósito principal: Tratamiento
  • Asignación: Aleatorizado
  • Modelo Intervencionista: Asignación paralela
  • Enmascaramiento: Doble

Armas e Intervenciones

Grupo de participantes/brazo
Intervención / Tratamiento
Experimental: Selective-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Comparador activo: Selective-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Experimental: Self-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Comparador activo: Self-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass

¿Qué mide el estudio?

Medidas de resultado primarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Retention rate
Periodo de tiempo: Three years
Presence of resin composite restorations of non-carious cervical lesions at the three-year follow-up examination.
Three years

Medidas de resultado secundarias

Medida de resultado
Medida Descripción
Periodo de tiempo
Marginal discoloration
Periodo de tiempo: Three years
Presence of marginal staining between the restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal integrity
Periodo de tiempo: Three years
The quality of the interface between restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal caries
Periodo de tiempo: Three years
The presence of clinical diagnosis of caries will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years

Colaboradores e Investigadores

Aquí es donde encontrará personas y organizaciones involucradas en este estudio.

Patrocinador

Fechas de registro del estudio

Estas fechas rastrean el progreso del registro del estudio y los envíos de resultados resumidos a ClinicalTrials.gov. Los registros del estudio y los resultados informados son revisados ​​por la Biblioteca Nacional de Medicina (NLM) para asegurarse de que cumplan con los estándares de control de calidad específicos antes de publicarlos en el sitio web público.

Fechas importantes del estudio

Inicio del estudio (Actual)

19 de noviembre de 2018

Finalización primaria (Anticipado)

1 de noviembre de 2019

Finalización del estudio (Anticipado)

1 de noviembre de 2021

Fechas de registro del estudio

Enviado por primera vez

18 de noviembre de 2018

Primero enviado que cumplió con los criterios de control de calidad

6 de enero de 2019

Publicado por primera vez (Actual)

9 de enero de 2019

Actualizaciones de registros de estudio

Última actualización publicada (Actual)

9 de enero de 2019

Última actualización enviada que cumplió con los criterios de control de calidad

6 de enero de 2019

Última verificación

1 de enero de 2019

Más información

Términos relacionados con este estudio

Términos MeSH relevantes adicionales

Otros números de identificación del estudio

  • 2/2018

Información sobre medicamentos y dispositivos, documentos del estudio

Estudia un producto farmacéutico regulado por la FDA de EE. UU.

No

Estudia un producto de dispositivo regulado por la FDA de EE. UU.

No

Esta información se obtuvo directamente del sitio web clinicaltrials.gov sin cambios. Si tiene alguna solicitud para cambiar, eliminar o actualizar los detalles de su estudio, comuníquese con register@clinicaltrials.gov. Tan pronto como se implemente un cambio en clinicaltrials.gov, también se actualizará automáticamente en nuestro sitio web. .

Ensayos clínicos sobre Adhesivo Universal

3
Suscribir