Tato stránka byla automaticky přeložena a přesnost překladu není zaručena. Podívejte se prosím na anglická verze pro zdrojový text.

Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch Mode With or Without Bioglass

6. ledna 2019 aktualizováno: Cristina Pasarín Linares, University of Valencia

Randomized Blind Clinical Trial, Four-armed Parallel of Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch With or Without Bioglass

Composite restoration of non-carious cervical lesions has always been a challenge for the clinician, considering that the most frequent cause of failure is retention loss.

Adhesion of composite restoration may be obtained by following four different etching techniques: total-etch in three steps, total-etch in two steps, self-etch in two steps, and self-etch in one step. Nowadays the tendency is to simplify the adhesive classic protocols. With the introduction of universal adhesives such as Prime&Bond Active (Dentsply Sirona) it is possible to obtain a total-etch pattern (enamel and dentine) without the classic etching technique with orthophosphoric acid.

On the other hand, there has been an increase in the awareness of the importance of remaining dental tissue preservation, avoiding preparation of a cavity. This is why it is now preferable to use bioactive glass in order to increase micromechanical retention on the dental surface, instead of the classical approach of preparing the surface with burs.

To date, there are no studies evaluating the clinical performance of the universal adhesive Prime&Bond Active on direct resin composite restoration of non-carious cervical lesions neither in a selective-etch mode (enamel etching) or a self-etch mode (no etching) or using sandblasting with bioactive glass. Therefore, the main objective of the study is to evaluate the retention rate of composite restorations using Prime&Bond Active and a previous sandblasted surface with bioglass in a three-year follow-up, as well as the presence of marginal discoloration, marginal integrity and marginal caries.

Přehled studie

Detailní popis

The protocol to be followed in the study is as follows:

  1. Obtention of a written informed consent of all participants.
  2. Complete medical and dental clinical record.
  3. Administration of anesthesia and absolute rubber dam isolation.
  4. Cavity cleaning with a prophylactic brush and rubber cup with pumice.
  5. Randomly assigning each non-carious cervical lesion to one of the four experimental groups:

    5.1. Selective enamel etching and surface roughening with bioglass 5.2. Selective enamel etching without surface roughening. 5.3. Self-etch and surface roughening with bioglass. 5.4. Self-etch without surface roughening.

  6. In experimental groups which need surface roughening (group 5.1 and 5.3), sandblasting with bioactive glass will be used in enamel.
  7. In experimental groups with selective enamel etch (5.1 and 5.2), 37 % orthophosphoric acid is applied for 15 seconds in enamel, followed by profuse washing with air/water spray for ten seconds and dried using air for 10 seconds without desiccating dentin.

    In groups 5.3 and 5.4 this step is omitted.

  8. Application of universal adhesive Prime&Bond Active on enamel and dentin for 20 seconds. Subsequently, evaporation of the solvent is realized by applying air for 5 seconds and then light curing for 20 seconds.
  9. Application of a "bulk fill" composite resin and light curing, following manufacturer's instructions.
  10. Finishing and polishing of the restoration.
  11. Monitoring and follow up: visits will be performed at six months, one year, two years and three years. In each evaluation, two independent clinicians who do not participate in the clinical procedures will evaluate each direct composite restoration according to USPHS criteria (Modified United States Public Health Service).

The primary objective is to evaluate the retention of the restoration. The secondary objectives are to evaluate marginal discoloration, marginal integrity and marginal caries.

Typ studie

Intervenční

Zápis (Očekávaný)

228

Fáze

  • Nelze použít

Kontakty a umístění

Tato část poskytuje kontaktní údaje pro ty, kteří studii provádějí, a informace o tom, kde se tato studie provádí.

Studijní místa

      • Valencia, Španělsko
        • University of Valencia

Kritéria účasti

Výzkumníci hledají lidi, kteří odpovídají určitému popisu, kterému se říká kritéria způsobilosti. Některé příklady těchto kritérií jsou celkový zdravotní stav osoby nebo předchozí léčba.

Kritéria způsobilosti

Věk způsobilý ke studiu

18 let až 70 let (Dospělý, Starší dospělý)

Přijímá zdravé dobrovolníky

Ne

Pohlaví způsobilá ke studiu

Všechno

Popis

Inclusion Criteria:

  1. Patients ≥ 18 years without systemic disease.
  2. Presence of a non-carious cervical lesion with a minimum of 1.5 mm in depth and extent to dentin.
  3. Non-carious cervical lesions in premolars and molars.

Exclusion Criteria:

  1. Presence of rampant caries or advanced periodontal disease.
  2. Consumption of > 2 cigarette pack/ day.
  3. Presence of severe xerostomia or bruxism.
  4. Methacrylate allergy.
  5. Pregnancy.

Teeth with pulpal and/or periapical pathology, and endodontically treated teeth are excluded from the study.

Teeth with previous pulp capping or previous class V restorations will also be excluded.

Studijní plán

Tato část poskytuje podrobnosti o studijním plánu, včetně toho, jak je studie navržena a co studie měří.

Jak je studie koncipována?

Detaily designu

  • Primární účel: Léčba
  • Přidělení: Randomizované
  • Intervenční model: Paralelní přiřazení
  • Maskování: Dvojnásobek

Zbraně a zásahy

Skupina účastníků / Arm
Intervence / Léčba
Experimentální: Selective-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Aktivní komparátor: Selective-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Experimentální: Self-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Aktivní komparátor: Self-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass

Co je měření studie?

Primární výstupní opatření

Měření výsledku
Popis opatření
Časové okno
Retention rate
Časové okno: Three years
Presence of resin composite restorations of non-carious cervical lesions at the three-year follow-up examination.
Three years

Sekundární výstupní opatření

Měření výsledku
Popis opatření
Časové okno
Marginal discoloration
Časové okno: Three years
Presence of marginal staining between the restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal integrity
Časové okno: Three years
The quality of the interface between restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal caries
Časové okno: Three years
The presence of clinical diagnosis of caries will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years

Spolupracovníci a vyšetřovatelé

Zde najdete lidi a organizace zapojené do této studie.

Termíny studijních záznamů

Tato data sledují průběh záznamů studie a předkládání souhrnných výsledků na ClinicalTrials.gov. Záznamy ze studií a hlášené výsledky jsou před zveřejněním na veřejné webové stránce přezkoumány Národní lékařskou knihovnou (NLM), aby se ujistily, že splňují specifické standardy kontroly kvality.

Hlavní termíny studia

Začátek studia (Aktuální)

19. listopadu 2018

Primární dokončení (Očekávaný)

1. listopadu 2019

Dokončení studie (Očekávaný)

1. listopadu 2021

Termíny zápisu do studia

První předloženo

18. listopadu 2018

První předloženo, které splnilo kritéria kontroly kvality

6. ledna 2019

První zveřejněno (Aktuální)

9. ledna 2019

Aktualizace studijních záznamů

Poslední zveřejněná aktualizace (Aktuální)

9. ledna 2019

Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality

6. ledna 2019

Naposledy ověřeno

1. ledna 2019

Více informací

Termíny související s touto studií

Další relevantní podmínky MeSH

Další identifikační čísla studie

  • 2/2018

Informace o lécích a zařízeních, studijní dokumenty

Studuje lékový produkt regulovaný americkým FDA

Ne

Studuje produkt zařízení regulovaný americkým úřadem FDA

Ne

Tyto informace byly beze změn načteny přímo z webu clinicaltrials.gov. Máte-li jakékoli požadavky na změnu, odstranění nebo aktualizaci podrobností studie, kontaktujte prosím register@clinicaltrials.gov. Jakmile bude změna implementována na clinicaltrials.gov, bude automaticky aktualizována i na našem webu .

3
Předplatit