Questa pagina è stata tradotta automaticamente e l'accuratezza della traduzione non è garantita. Si prega di fare riferimento al Versione inglese per un testo di partenza.

Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch Mode With or Without Bioglass

6 gennaio 2019 aggiornato da: Cristina Pasarín Linares, University of Valencia

Randomized Blind Clinical Trial, Four-armed Parallel of Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch With or Without Bioglass

Composite restoration of non-carious cervical lesions has always been a challenge for the clinician, considering that the most frequent cause of failure is retention loss.

Adhesion of composite restoration may be obtained by following four different etching techniques: total-etch in three steps, total-etch in two steps, self-etch in two steps, and self-etch in one step. Nowadays the tendency is to simplify the adhesive classic protocols. With the introduction of universal adhesives such as Prime&Bond Active (Dentsply Sirona) it is possible to obtain a total-etch pattern (enamel and dentine) without the classic etching technique with orthophosphoric acid.

On the other hand, there has been an increase in the awareness of the importance of remaining dental tissue preservation, avoiding preparation of a cavity. This is why it is now preferable to use bioactive glass in order to increase micromechanical retention on the dental surface, instead of the classical approach of preparing the surface with burs.

To date, there are no studies evaluating the clinical performance of the universal adhesive Prime&Bond Active on direct resin composite restoration of non-carious cervical lesions neither in a selective-etch mode (enamel etching) or a self-etch mode (no etching) or using sandblasting with bioactive glass. Therefore, the main objective of the study is to evaluate the retention rate of composite restorations using Prime&Bond Active and a previous sandblasted surface with bioglass in a three-year follow-up, as well as the presence of marginal discoloration, marginal integrity and marginal caries.

Panoramica dello studio

Descrizione dettagliata

The protocol to be followed in the study is as follows:

  1. Obtention of a written informed consent of all participants.
  2. Complete medical and dental clinical record.
  3. Administration of anesthesia and absolute rubber dam isolation.
  4. Cavity cleaning with a prophylactic brush and rubber cup with pumice.
  5. Randomly assigning each non-carious cervical lesion to one of the four experimental groups:

    5.1. Selective enamel etching and surface roughening with bioglass 5.2. Selective enamel etching without surface roughening. 5.3. Self-etch and surface roughening with bioglass. 5.4. Self-etch without surface roughening.

  6. In experimental groups which need surface roughening (group 5.1 and 5.3), sandblasting with bioactive glass will be used in enamel.
  7. In experimental groups with selective enamel etch (5.1 and 5.2), 37 % orthophosphoric acid is applied for 15 seconds in enamel, followed by profuse washing with air/water spray for ten seconds and dried using air for 10 seconds without desiccating dentin.

    In groups 5.3 and 5.4 this step is omitted.

  8. Application of universal adhesive Prime&Bond Active on enamel and dentin for 20 seconds. Subsequently, evaporation of the solvent is realized by applying air for 5 seconds and then light curing for 20 seconds.
  9. Application of a "bulk fill" composite resin and light curing, following manufacturer's instructions.
  10. Finishing and polishing of the restoration.
  11. Monitoring and follow up: visits will be performed at six months, one year, two years and three years. In each evaluation, two independent clinicians who do not participate in the clinical procedures will evaluate each direct composite restoration according to USPHS criteria (Modified United States Public Health Service).

The primary objective is to evaluate the retention of the restoration. The secondary objectives are to evaluate marginal discoloration, marginal integrity and marginal caries.

Tipo di studio

Interventistico

Iscrizione (Anticipato)

228

Fase

  • Non applicabile

Contatti e Sedi

Questa sezione fornisce i recapiti di coloro che conducono lo studio e informazioni su dove viene condotto lo studio.

Luoghi di studio

      • Valencia, Spagna
        • University of Valencia

Criteri di partecipazione

I ricercatori cercano persone che corrispondano a una certa descrizione, chiamata criteri di ammissibilità. Alcuni esempi di questi criteri sono le condizioni generali di salute di una persona o trattamenti precedenti.

Criteri di ammissibilità

Età idonea allo studio

Da 18 anni a 70 anni (Adulto, Adulto più anziano)

Accetta volontari sani

No

Sessi ammissibili allo studio

Tutto

Descrizione

Inclusion Criteria:

  1. Patients ≥ 18 years without systemic disease.
  2. Presence of a non-carious cervical lesion with a minimum of 1.5 mm in depth and extent to dentin.
  3. Non-carious cervical lesions in premolars and molars.

Exclusion Criteria:

  1. Presence of rampant caries or advanced periodontal disease.
  2. Consumption of > 2 cigarette pack/ day.
  3. Presence of severe xerostomia or bruxism.
  4. Methacrylate allergy.
  5. Pregnancy.

Teeth with pulpal and/or periapical pathology, and endodontically treated teeth are excluded from the study.

Teeth with previous pulp capping or previous class V restorations will also be excluded.

Piano di studio

Questa sezione fornisce i dettagli del piano di studio, compreso il modo in cui lo studio è progettato e ciò che lo studio sta misurando.

Come è strutturato lo studio?

Dettagli di progettazione

  • Scopo principale: Trattamento
  • Assegnazione: Randomizzato
  • Modello interventistico: Assegnazione parallela
  • Mascheramento: Doppio

Armi e interventi

Gruppo di partecipanti / Arm
Intervento / Trattamento
Sperimentale: Selective-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Comparatore attivo: Selective-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Sperimentale: Self-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Comparatore attivo: Self-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass

Cosa sta misurando lo studio?

Misure di risultato primarie

Misura del risultato
Misura Descrizione
Lasso di tempo
Retention rate
Lasso di tempo: Three years
Presence of resin composite restorations of non-carious cervical lesions at the three-year follow-up examination.
Three years

Misure di risultato secondarie

Misura del risultato
Misura Descrizione
Lasso di tempo
Marginal discoloration
Lasso di tempo: Three years
Presence of marginal staining between the restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal integrity
Lasso di tempo: Three years
The quality of the interface between restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal caries
Lasso di tempo: Three years
The presence of clinical diagnosis of caries will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years

Collaboratori e investigatori

Qui è dove troverai le persone e le organizzazioni coinvolte in questo studio.

Studiare le date dei record

Queste date tengono traccia dell'avanzamento della registrazione dello studio e dell'invio dei risultati di sintesi a ClinicalTrials.gov. I record degli studi e i risultati riportati vengono esaminati dalla National Library of Medicine (NLM) per assicurarsi che soddisfino specifici standard di controllo della qualità prima di essere pubblicati sul sito Web pubblico.

Studia le date principali

Inizio studio (Effettivo)

19 novembre 2018

Completamento primario (Anticipato)

1 novembre 2019

Completamento dello studio (Anticipato)

1 novembre 2021

Date di iscrizione allo studio

Primo inviato

18 novembre 2018

Primo inviato che soddisfa i criteri di controllo qualità

6 gennaio 2019

Primo Inserito (Effettivo)

9 gennaio 2019

Aggiornamenti dei record di studio

Ultimo aggiornamento pubblicato (Effettivo)

9 gennaio 2019

Ultimo aggiornamento inviato che soddisfa i criteri QC

6 gennaio 2019

Ultimo verificato

1 gennaio 2019

Maggiori informazioni

Termini relativi a questo studio

Termini MeSH pertinenti aggiuntivi

Altri numeri di identificazione dello studio

  • 2/2018

Informazioni su farmaci e dispositivi, documenti di studio

Studia un prodotto farmaceutico regolamentato dalla FDA degli Stati Uniti

No

Studia un dispositivo regolamentato dalla FDA degli Stati Uniti

No

Queste informazioni sono state recuperate direttamente dal sito web clinicaltrials.gov senza alcuna modifica. In caso di richieste di modifica, rimozione o aggiornamento dei dettagli dello studio, contattare register@clinicaltrials.gov. Non appena verrà implementata una modifica su clinicaltrials.gov, questa verrà aggiornata automaticamente anche sul nostro sito web .

3
Sottoscrivi