Ta strona została przetłumaczona automatycznie i dokładność tłumaczenia nie jest gwarantowana. Proszę odnieść się do angielska wersja za tekst źródłowy.

Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch Mode With or Without Bioglass

6 stycznia 2019 zaktualizowane przez: Cristina Pasarín Linares, University of Valencia

Randomized Blind Clinical Trial, Four-armed Parallel of Clinical Performance of Prime&Bond Active in Self-etch or Selective-etch With or Without Bioglass

Composite restoration of non-carious cervical lesions has always been a challenge for the clinician, considering that the most frequent cause of failure is retention loss.

Adhesion of composite restoration may be obtained by following four different etching techniques: total-etch in three steps, total-etch in two steps, self-etch in two steps, and self-etch in one step. Nowadays the tendency is to simplify the adhesive classic protocols. With the introduction of universal adhesives such as Prime&Bond Active (Dentsply Sirona) it is possible to obtain a total-etch pattern (enamel and dentine) without the classic etching technique with orthophosphoric acid.

On the other hand, there has been an increase in the awareness of the importance of remaining dental tissue preservation, avoiding preparation of a cavity. This is why it is now preferable to use bioactive glass in order to increase micromechanical retention on the dental surface, instead of the classical approach of preparing the surface with burs.

To date, there are no studies evaluating the clinical performance of the universal adhesive Prime&Bond Active on direct resin composite restoration of non-carious cervical lesions neither in a selective-etch mode (enamel etching) or a self-etch mode (no etching) or using sandblasting with bioactive glass. Therefore, the main objective of the study is to evaluate the retention rate of composite restorations using Prime&Bond Active and a previous sandblasted surface with bioglass in a three-year follow-up, as well as the presence of marginal discoloration, marginal integrity and marginal caries.

Przegląd badań

Szczegółowy opis

The protocol to be followed in the study is as follows:

  1. Obtention of a written informed consent of all participants.
  2. Complete medical and dental clinical record.
  3. Administration of anesthesia and absolute rubber dam isolation.
  4. Cavity cleaning with a prophylactic brush and rubber cup with pumice.
  5. Randomly assigning each non-carious cervical lesion to one of the four experimental groups:

    5.1. Selective enamel etching and surface roughening with bioglass 5.2. Selective enamel etching without surface roughening. 5.3. Self-etch and surface roughening with bioglass. 5.4. Self-etch without surface roughening.

  6. In experimental groups which need surface roughening (group 5.1 and 5.3), sandblasting with bioactive glass will be used in enamel.
  7. In experimental groups with selective enamel etch (5.1 and 5.2), 37 % orthophosphoric acid is applied for 15 seconds in enamel, followed by profuse washing with air/water spray for ten seconds and dried using air for 10 seconds without desiccating dentin.

    In groups 5.3 and 5.4 this step is omitted.

  8. Application of universal adhesive Prime&Bond Active on enamel and dentin for 20 seconds. Subsequently, evaporation of the solvent is realized by applying air for 5 seconds and then light curing for 20 seconds.
  9. Application of a "bulk fill" composite resin and light curing, following manufacturer's instructions.
  10. Finishing and polishing of the restoration.
  11. Monitoring and follow up: visits will be performed at six months, one year, two years and three years. In each evaluation, two independent clinicians who do not participate in the clinical procedures will evaluate each direct composite restoration according to USPHS criteria (Modified United States Public Health Service).

The primary objective is to evaluate the retention of the restoration. The secondary objectives are to evaluate marginal discoloration, marginal integrity and marginal caries.

Typ studiów

Interwencyjne

Zapisy (Oczekiwany)

228

Faza

  • Nie dotyczy

Kontakty i lokalizacje

Ta sekcja zawiera dane kontaktowe osób prowadzących badanie oraz informacje o tym, gdzie badanie jest przeprowadzane.

Lokalizacje studiów

      • Valencia, Hiszpania
        • University of Valencia

Kryteria uczestnictwa

Badacze szukają osób, które pasują do określonego opisu, zwanego kryteriami kwalifikacyjnymi. Niektóre przykłady tych kryteriów to ogólny stan zdrowia danej osoby lub wcześniejsze leczenie.

Kryteria kwalifikacji

Wiek uprawniający do nauki

18 lat do 70 lat (Dorosły, Starszy dorosły)

Akceptuje zdrowych ochotników

Nie

Płeć kwalifikująca się do nauki

Wszystko

Opis

Inclusion Criteria:

  1. Patients ≥ 18 years without systemic disease.
  2. Presence of a non-carious cervical lesion with a minimum of 1.5 mm in depth and extent to dentin.
  3. Non-carious cervical lesions in premolars and molars.

Exclusion Criteria:

  1. Presence of rampant caries or advanced periodontal disease.
  2. Consumption of > 2 cigarette pack/ day.
  3. Presence of severe xerostomia or bruxism.
  4. Methacrylate allergy.
  5. Pregnancy.

Teeth with pulpal and/or periapical pathology, and endodontically treated teeth are excluded from the study.

Teeth with previous pulp capping or previous class V restorations will also be excluded.

Plan studiów

Ta sekcja zawiera szczegółowe informacje na temat planu badania, w tym sposób zaprojektowania badania i jego pomiary.

Jak projektuje się badanie?

Szczegóły projektu

  • Główny cel: Leczenie
  • Przydział: Randomizowane
  • Model interwencyjny: Przydział równoległy
  • Maskowanie: Podwójnie

Broń i interwencje

Grupa uczestników / Arm
Interwencja / Leczenie
Eksperymentalny: Selective-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Aktywny komparator: Selective-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Eksperymentalny: Self-etch with bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass
Aktywny komparator: Self-etch without bioglass surface roughening
Restoration of non-carious cervical lesions with Prime&Bond Active in self-etch or selective-etch mode with or without bioglass

Co mierzy badanie?

Podstawowe miary wyniku

Miara wyniku
Opis środka
Ramy czasowe
Retention rate
Ramy czasowe: Three years
Presence of resin composite restorations of non-carious cervical lesions at the three-year follow-up examination.
Three years

Miary wyników drugorzędnych

Miara wyniku
Opis środka
Ramy czasowe
Marginal discoloration
Ramy czasowe: Three years
Presence of marginal staining between the restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal integrity
Ramy czasowe: Three years
The quality of the interface between restoration and tooth will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years
Marginal caries
Ramy czasowe: Three years
The presence of clinical diagnosis of caries will be evaluated following USPHS criteria (Modified United States Public Health Service)
Three years

Współpracownicy i badacze

Tutaj znajdziesz osoby i organizacje zaangażowane w to badanie.

Daty zapisu na studia

Daty te śledzą postęp w przesyłaniu rekordów badań i podsumowań wyników do ClinicalTrials.gov. Zapisy badań i zgłoszone wyniki są przeglądane przez National Library of Medicine (NLM), aby upewnić się, że spełniają określone standardy kontroli jakości, zanim zostaną opublikowane na publicznej stronie internetowej.

Główne daty studiów

Rozpoczęcie studiów (Rzeczywisty)

19 listopada 2018

Zakończenie podstawowe (Oczekiwany)

1 listopada 2019

Ukończenie studiów (Oczekiwany)

1 listopada 2021

Daty rejestracji na studia

Pierwszy przesłany

18 listopada 2018

Pierwszy przesłany, który spełnia kryteria kontroli jakości

6 stycznia 2019

Pierwszy wysłany (Rzeczywisty)

9 stycznia 2019

Aktualizacje rekordów badań

Ostatnia wysłana aktualizacja (Rzeczywisty)

9 stycznia 2019

Ostatnia przesłana aktualizacja, która spełniała kryteria kontroli jakości

6 stycznia 2019

Ostatnia weryfikacja

1 stycznia 2019

Więcej informacji

Terminy związane z tym badaniem

Dodatkowe istotne warunki MeSH

Inne numery identyfikacyjne badania

  • 2/2018

Informacje o lekach i urządzeniach, dokumenty badawcze

Bada produkt leczniczy regulowany przez amerykańską FDA

Nie

Bada produkt urządzenia regulowany przez amerykańską FDA

Nie

Te informacje zostały pobrane bezpośrednio ze strony internetowej clinicaltrials.gov bez żadnych zmian. Jeśli chcesz zmienić, usunąć lub zaktualizować dane swojego badania, skontaktuj się z register@clinicaltrials.gov. Gdy tylko zmiana zostanie wprowadzona na stronie clinicaltrials.gov, zostanie ona automatycznie zaktualizowana również na naszej stronie internetowej .

3
Subskrybuj