Occlusal Contact Trueness Affected by Six Chairside CAD/CAM Ceramic Materials
Quantitative Clinical Evaluation of the Occlusal Contact Trueness Affected by Six Chairside CAD/CAM Ceramic Materials：a Self-control Study
調査の概要
詳細な説明
研究の種類
入学 (実際)
段階
- 適用できない
連絡先と場所
研究場所
-
-
Fujian
-
Fuzhou、Fujian、中国、350004
- Fujian Medical University
-
-
参加基準
適格基準
就学可能な年齢
健康ボランティアの受け入れ
受講資格のある性別
説明
Inclusion Criteria:
- with one mandibular first molar requiring crown restoration that have undergone root canal treatment;
- with complete permanent dentition;
Exclusion Criteria:
- with carious lesions, abrasions, attrition, erosions or any kind of tooth defects;
- with any kind of restorations in occlusal surfaces;
- with any sign of temporomandibular dysfunction.
研究計画
研究はどのように設計されていますか？
デザインの詳細
- 主な目的：処理
- 割り当て：非ランダム化
- 介入モデル：クロスオーバー割り当て
- マスキング：ダブル
武器と介入
参加者グループ / アーム |
介入・治療 |
|---|---|
|
実験的：Zirconia
10 crowns made of zirconia from 10 individual were milled, post-processed and occlusal adjusted in patients' mouth.
|
6 crowns made from 6 chairside ceramic materials were milled by CEREC MCXL-EF mode for mandibular first molar of each participant. The six materials are as follows: ZIR: InCoris TZI (Dentsply Sirona, York, PA)， CD: Celtra Duo (Dentsply Sirona, York, PA), EMA: e.max CAD (ivoclar, Vivadent AG), LC: LiCi (UPCERA, China), ENA: Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) RC: RunCi (UPCERA, China) |
|
実験的：Celtra Duo
10 crowns made of Celtra Duo from 10 individual were milled, post-processed and occlusal adjusted in patients' mouth.
|
6 crowns made from 6 chairside ceramic materials were milled by CEREC MCXL-EF mode for mandibular first molar of each participant. The six materials are as follows: ZIR: InCoris TZI (Dentsply Sirona, York, PA)， CD: Celtra Duo (Dentsply Sirona, York, PA), EMA: e.max CAD (ivoclar, Vivadent AG), LC: LiCi (UPCERA, China), ENA: Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) RC: RunCi (UPCERA, China) |
|
実験的：e.max CAD
10 crowns made of e.max CAD from 10 individual were milled, post-processed and occlusal adjusted in patients' mouth.
|
6 crowns made from 6 chairside ceramic materials were milled by CEREC MCXL-EF mode for mandibular first molar of each participant. The six materials are as follows: ZIR: InCoris TZI (Dentsply Sirona, York, PA)， CD: Celtra Duo (Dentsply Sirona, York, PA), EMA: e.max CAD (ivoclar, Vivadent AG), LC: LiCi (UPCERA, China), ENA: Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) RC: RunCi (UPCERA, China) |
|
実験的：Lici UPCERA
10 crowns made of Lici from 10 individual were milled, post-processed and occlusal adjusted in patients' mouth.
|
6 crowns made from 6 chairside ceramic materials were milled by CEREC MCXL-EF mode for mandibular first molar of each participant. The six materials are as follows: ZIR: InCoris TZI (Dentsply Sirona, York, PA)， CD: Celtra Duo (Dentsply Sirona, York, PA), EMA: e.max CAD (ivoclar, Vivadent AG), LC: LiCi (UPCERA, China), ENA: Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) RC: RunCi (UPCERA, China) |
|
実験的：Enamic
10 crowns made of Enamic from 10 individual were milled, post-processed and occlusal adjusted in patients' mouth.
|
6 crowns made from 6 chairside ceramic materials were milled by CEREC MCXL-EF mode for mandibular first molar of each participant. The six materials are as follows: ZIR: InCoris TZI (Dentsply Sirona, York, PA)， CD: Celtra Duo (Dentsply Sirona, York, PA), EMA: e.max CAD (ivoclar, Vivadent AG), LC: LiCi (UPCERA, China), ENA: Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) RC: RunCi (UPCERA, China) |
|
実験的：Runci UPCERA
10 crowns made of Runci from 10 individual were milled, post-processed and occlusal adjusted in patients' mouth.
|
6 crowns made from 6 chairside ceramic materials were milled by CEREC MCXL-EF mode for mandibular first molar of each participant. The six materials are as follows: ZIR: InCoris TZI (Dentsply Sirona, York, PA)， CD: Celtra Duo (Dentsply Sirona, York, PA), EMA: e.max CAD (ivoclar, Vivadent AG), LC: LiCi (UPCERA, China), ENA: Vita Enamic (Vita Zahnfabrik, Bad Sackingen, Germany) RC: RunCi (UPCERA, China) |
この研究は何を測定していますか？
主要な結果の測定
結果測定 |
メジャーの説明 |
時間枠 |
|---|---|---|
|
milling trueness(μm)
時間枠：1 week
|
the absolute 3D deviation of occlusal contact points before and after milling
|
1 week
|
|
postprocessing trueness(μm)
時間枠：1 week
|
the absolute 3D deviation of occlusal contact points before and after postprocessing
|
1 week
|
|
clinical trueness(μm)
時間枠：1 week
|
the absolute 3D deviation of occlusal contact points before and after occlusal adjustment
|
1 week
|
協力者と研究者
捜査官
- 主任研究者：Hao Yu、Fujian Medical University
研究記録日
主要日程の研究
研究開始 (実際)
一次修了 (実際)
研究の完了 (実際)
試験登録日
最初に提出
QC基準を満たした最初の提出物
最初の投稿 (実際)
学習記録の更新
投稿された最後の更新 (実際)
QC基準を満たした最後の更新が送信されました
最終確認日
詳しくは
本研究に関する用語
その他の研究ID番号
- 2019028
個々の参加者データ (IPD) の計画
個々の参加者データ (IPD) を共有する予定はありますか?
医薬品およびデバイス情報、研究文書
米国FDA規制医薬品の研究
米国FDA規制機器製品の研究
この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。