このページは自動翻訳されたものであり、翻訳の正確性は保証されていません。を参照してください。 英語版 ソーステキスト用。

Trunk and Lower Limb Muscle Contributions to ACL Loading During Single-Leg Landing

2026年5月19日 更新者:Shazlin Shaharudin、Universiti Sains Malaysia
Anterior cruciate ligament (ACL) injuries commonly occurred through non-contact mechanisms during dynamic tasks such as single-leg landing (SLL). Trunk control and lower limb muscle coordination were believed to play a critical role in modulating knee joint biomechanics and ACL loading; however, their individual muscle contributions remained poorly understood due to the difficulty of in-vivo ACL force measurement. This cross-sectional study aimed to investigate the relationship between core strength, lower limb muscle forces, knee joint biomechanics, and ACL loading during single-leg landing in collegiate athletes. Three-dimensional full-body kinematics, ground reaction forces, and electromyography data were collected and integrated into a musculoskeletal modelling framework to estimate ACL loading and individual muscle force contributions. Findings from this study were expected to provide biomechanical evidence to support targeted injury-prevention and rehabilitation strategies.

調査の概要

状態

完了

条件

詳細な説明

Anterior cruciate ligament injuries often led to long-term consequences including early knee osteoarthritis, abnormal neuromuscular function, and reduced athletic participation. Approximately 70% of ACL injuries occurred via non-contact mechanisms, frequently during single-leg landing tasks. During such movements, ACL loading was influenced by joint kinematics, external forces, and neuromuscular coordination of both trunk and lower limb muscles. This study adopted a two-level approach. First, standard biomechanical analyses were conducted to evaluate the relationship between functional core strength and knee joint biomechanics, including knee valgus angle and knee abduction moment during SLL. Second, a musculoskeletal modelling approach was employed to quantify the contribution of individual trunk and lower limb muscles to ACL loading.

Participants performed standardized single-leg landing tasks while wearing inertial motion sensors and surface electromyography electrodes. Ground reaction forces were recorded using a force platform. A full-body musculoskeletal model was scaled to participant anthropometry and used to estimate muscle forces and ACL loading during the landing phase. Statistical analyses included linear regression and linear mixed-effects modelling to examine relationships between muscle forces, knee biomechanics, and ACL loading.

研究の種類

観察的

入学 (実際)

40

連絡先と場所

このセクションには、調査を実施する担当者の連絡先の詳細と、この調査が実施されている場所に関する情報が記載されています。

研究場所

    • Pulau Pinang
      • Nibong Tebal、Pulau Pinang、マレーシア
        • School of Mechanical Engineering, Universiti Sains Malaysia

参加基準

研究者は、適格基準と呼ばれる特定の説明に適合する人を探します。これらの基準のいくつかの例は、人の一般的な健康状態または以前の治療です。

適格基準

就学可能な年齢

  • 大人

健康ボランティアの受け入れ

はい

サンプリング方法

非確率サンプル

調査対象母集団

The study population consisted of forty collegiate male athletes aged 19 to 25 years who participated in sports involving frequent jumping and landing movements. All participants had a minimum of three years of competitive experience and trained at least twice per week. Individuals with a history of major lower limb or back injury requiring surgery, current musculoskeletal injury, or medical conditions limiting maximal physical effort were excluded. All participants provided written informed consent prior to participation.

説明

Inclusion Criteria:

  • Male collegiate athletes aged 19-25 years
  • Minimum of 3 years of competitive experience in jump-landing sports (e.g., volleyball, basketball, netball)
  • Training frequency of at least twice per week
  • No history of back or lower limb injury

Exclusion Criteria:

  • History of major lower limb or back injury requiring surgery
  • Any medical condition preventing maximal physical effort
  • Current musculoskeletal pain or injury affecting movement performance

研究計画

このセクションでは、研究がどのように設計され、研究が何を測定しているかなど、研究計画の詳細を提供します。

研究はどのように設計されていますか?

デザインの詳細

この研究は何を測定していますか?

主要な結果の測定

結果測定
メジャーの説明
時間枠
Peak Anterior Cruciate Ligament (ACL) Force During Single-Leg Landing
時間枠:Assessed during a single laboratory testing session (up to 2 hours).
Peak anterior cruciate ligament (ACL) force (Newtons, N) was estimated during the landing phase of a single-leg landing task using subject-specific musculoskeletal modelling. Three-dimensional whole-body kinematics (Xsens inertial motion capture), ground reaction forces (Bertec force platform), and surface electromyography (EMG) signals from trunk and lower limb muscles were integrated within a full-body musculoskeletal model to compute ACL loading. Peak ACL force was extracted from initial ground contact to maximum knee flexion.
Assessed during a single laboratory testing session (up to 2 hours).
Correlation Between Plank Endurance Time and Peak Knee Valgus Angle During Single-Leg Landing
時間枠:Assessed during a single laboratory testing session (up to 2 hours).
Pearson correlation between plank endurance time (seconds) and peak knee valgus angle (degrees) measured during single-leg landing using three-dimensional motion analysis (Xsens inertial motion capture).
Assessed during a single laboratory testing session (up to 2 hours).
Knee Valgus Angle During Single-Leg Landing
時間枠:Assessed during a single laboratory testing session (up to 2 hours).
Peak knee valgus angle (degrees, °) was calculated from three-dimensional lower limb kinematic data collected using full-body inertial motion capture (Xsens). Knee joint angles were derived using inverse kinematics and analyzed from initial ground contact to maximum knee flexion during the single-leg landing task.
Assessed during a single laboratory testing session (up to 2 hours).
Knee Abduction Moment During Single-Leg Landing
時間枠:Assessed during a single laboratory testing session (up to 2 hours).
Peak knee abduction moment (Newton-meters, Nm) was computed using inverse dynamics based on synchronized three-dimensional kinematic data (Xsens) and ground reaction force data (Bertec force platform). Peak values were identified during the landing phase from initial ground contact to maximum knee flexion.
Assessed during a single laboratory testing session (up to 2 hours).
Trunk and Lower Limb Muscle Forces During Single-Leg Landing
時間枠:Assessed during a single laboratory testing session (up to 2 hours).
Peak trunk and lower limb muscle forces (Newtons, N) were estimated using a full-body lumbar spine musculoskeletal model driven by experimental kinematics, ground reaction forces, and electromyography-informed muscle activation patterns. Muscle force outputs were analyzed during the landing phase of the single-leg landing task from initial ground contact to maximum knee flexion.
Assessed during a single laboratory testing session (up to 2 hours).

協力者と研究者

ここでは、この調査に関係する人々や組織を見つけることができます。

スポンサー

研究記録日

これらの日付は、ClinicalTrials.gov への研究記録と要約結果の提出の進捗状況を追跡します。研究記録と報告された結果は、国立医学図書館 (NLM) によって審査され、公開 Web サイトに掲載される前に、特定の品質管理基準を満たしていることが確認されます。

主要日程の研究

研究開始 (実際)

2024年6月12日

一次修了 (実際)

2024年7月11日

研究の完了 (実際)

2024年7月11日

試験登録日

最初に提出

2026年1月1日

QC基準を満たした最初の提出物

2026年5月19日

最初の投稿 (実際)

2026年5月27日

学習記録の更新

投稿された最後の更新 (実際)

2026年5月27日

QC基準を満たした最後の更新が送信されました

2026年5月19日

最終確認日

2026年1月1日

詳しくは

本研究に関する用語

その他の研究ID番号

  • USM/JEPeM/KK/23100759

医薬品およびデバイス情報、研究文書

米国FDA規制医薬品の研究

いいえ

米国FDA規制機器製品の研究

いいえ

この情報は、Web サイト clinicaltrials.gov から変更なしで直接取得したものです。研究の詳細を変更、削除、または更新するリクエストがある場合は、register@clinicaltrials.gov。 までご連絡ください。 clinicaltrials.gov に変更が加えられるとすぐに、ウェブサイトでも自動的に更新されます。

購読する