Clinical Evaluation of 3D-Printed Versus Direct Composite Restorations in Class II Cavities
The aim of this study is to clinically evaluate the performance of 3D-printed composites compared to direct conventional composite restorations in Class II cavities
Studie Overzicht
Toestand
Conditie
Interventie / Behandeling
Gedetailleerde beschrijving
Resin-based composites are widely used for posterior restorations because of their esthetics, adhesion, and conservative preparation. However, Class II restorations remain challenging due to polymerization shrinkage, marginal gaps, postoperative sensitivity, and inadequate proximal contacts. Digital additive manufacturing has emerged as a promising approach, offering precise fabrication, reduced material waste, and customizable restorations. Although laboratory studies suggest favorable mechanical properties and marginal adaptation, clinical evidence for 3D-printed intracoronal restorations remains limited. Therefore, this randomized clinical trial will compare the clinical performance of 3D-printed composite inlays with conventional direct composite restorations in Class II cavities over 24 months.
Studietype
Inschrijving (Geschat)
Fase
- Niet toepasbaar
Contacten en locaties
Studie Locaties
-
-
Egypt
-
Tanta, Egypt, Egypte, 31511
- aculty of Dentistry, Tanta University, Tanta, Tanta 31527
-
-
Deelname Criteria
Geschiktheidscriteria
Leeftijden die in aanmerking komen voor studie
Accepteert gezonde vrijwilligers
Geslachten die in aanmerking komen voor studie
Beschrijving
Inclusion Criteria:
- Have at least two Class II carious lesions corresponded to ICDAS scores 4 and 5, representing dentinal caries suitable for operative restorative treatment.
- The absence of ongoing orthodontic treatment or use of prostheses.
- Good general health without relevant disease.
Exclusion Criteria:
- Uncooperative patient.
- Any parafunctional habits such as tooth clenching or grinding.
- Chronic pulmonary diseases and blocked nasal passages.
Studie plan
Hoe is de studie opgezet?
Ontwerpdetails
- Primair doel: Ander
- Toewijzing: Gerandomiseerd
- Interventioneel model: Parallelle opdracht
- Masker: Dubbele
Wapens en interventies
Deelnemersgroep / Arm |
Interventie / Behandeling |
|---|---|
|
Experimenteel: 3D-Printed Composite Inlays
Participants will receive Class II restorations fabricated from a commercially available 3D-printable permanent composite resin using a standardized digital workflow. The restorations will be adhesively bonded to the prepared cavities according to the manufacturer's instructions. |
Class II cavities will be restored with digitally designed and 3D-printed permanent composite inlays. The restorations will be post-cured and adhesively cemented according to the material manufacturer's recommendations |
|
Actieve vergelijker: Direct Composite Restorations
Participants will receive conventional direct Class II restorations using a commercially available resin-based composite. Restorations will be placed incrementally using a standardized adhesive protocol and light-curing procedure according to the manufacturer's recommendations. Both groups will be clinically evaluated at baseline and during the 18-month follow-up period using standardized clinical criteria. |
Class II cavities will be restored directly using a conventional light-cured resin-based composite placed with a standardized incremental technique and adhesive protocol |
Wat meet het onderzoek?
Primaire uitkomstmaten
Uitkomstmaat |
Maatregel Beschrijving |
Tijdsspanne |
|---|---|---|
|
Fracture and retention
Tijdsspanne: 18 months
|
Description: Clinical evaluation of fracture and retentin was conducted in accordance with the World Dental Federation (FDI) criteria by two calibrated examiners at baseline and after 6, 12, and 18 months. Each restoration was evaluated according to the degree of conformity with the established criteria as follows: score 1, excellent; scores 2 and 3, satisfactory; and scores 4 and 5, inadequate. Scores of 1-3 were considered indicative of clinical success, whereas scores of 4 or 5 were considered indicative of failure. |
18 months
|
Medewerkers en onderzoekers
Sponsor
Publicaties en nuttige links
Algemene publicaties
- Balestra D, Lowther M, Goracci C, Mandurino M, Cortili S, Paolone G, Louca C, Vichi A. 3D Printed Materials for Permanent Restorations in Indirect Restorative and Prosthetic Dentistry: A Critical Review of the Literature. Materials (Basel). 2024 Mar 18;17(6):1380. doi: 10.3390/ma17061380.
- Duarte S Jr, Phark JH. Advances in Dental Restorations: A Comprehensive Review of Machinable and 3D-Printed Ceramic-Reinforced Composites. J Esthet Restor Dent. 2025 Jan;37(1):257-276. doi: 10.1111/jerd.13371. Epub 2024 Nov 18.
- Tanaka LEB, da Silva Rodrigues C, Grangeiro MTV, Campos TMB, de Melo RM. Characterization of 3D printed composite for final dental restorations. Clin Oral Investig. 2024 Oct 31;28(11):617. doi: 10.1007/s00784-024-06003-8.
- Peskersoy C, Oguzhan A. Evaluation of the Mechanical and Adhesion Characteristics of Indirect Restorations Manufactured with Three-Dimensional Printing. Polymers (Basel). 2024 Feb 23;16(5):613. doi: 10.3390/polym16050613.
Studie record data
Bestudeer belangrijke data
Studie start (Werkelijk)
Primaire voltooiing (Geschat)
Studie voltooiing (Geschat)
Studieregistratiedata
Eerst ingediend
Eerst ingediend dat voldeed aan de QC-criteria
Eerst geplaatst (Werkelijk)
Updates van studierecords
Laatste update geplaatst (Werkelijk)
Laatste update ingediend die voldeed aan QC-criteria
Laatst geverifieerd
Meer informatie
Termen gerelateerd aan deze studie
Andere studie-ID-nummers
- 3D-Printed & Direct Composite
Plan Individuele Deelnemersgegevens (IPD)
Bent u van plan om gegevens van individuele deelnemers (IPD) te delen?
Informatie over medicijnen en apparaten, studiedocumenten
Bestudeert een door de Amerikaanse FDA gereguleerd geneesmiddel
Bestudeert een door de Amerikaanse FDA gereguleerd apparaatproduct
Deze informatie is zonder wijzigingen rechtstreeks van de website clinicaltrials.gov gehaald. Als u verzoeken heeft om uw onderzoeksgegevens te wijzigen, te verwijderen of bij te werken, neem dan contact op met register@clinicaltrials.gov. Zodra er een wijziging wordt doorgevoerd op clinicaltrials.gov, wordt deze ook automatisch bijgewerkt op onze website .