Denne side blev automatisk oversat, og nøjagtigheden af ​​oversættelsen er ikke garanteret. Der henvises til engelsk version for en kildetekst.

Formula Identification (FID) 114657 in Contact Lens Wearers

4. oktober 2016 opdateret af: Alcon Research

Evaluation of a Lubricant Eye Drop on Tear Lipid Layer Thickness in Contact Lens Wearers

The purpose of this study is to evaluate the thickness of the pre-lens tear lipid layer after 2 hours of lens wear with use of FID 114657 compared to saline control.

Studieoversigt

Status

Afsluttet

Betingelser

Intervention / Behandling

Undersøgelsestype

Interventionel

Tilmelding (Faktiske)

234

Fase

  • Ikke anvendelig

Deltagelseskriterier

Forskere leder efter personer, der passer til en bestemt beskrivelse, kaldet berettigelseskriterier. Nogle eksempler på disse kriterier er en persons generelle helbredstilstand eller tidligere behandlinger.

Berettigelseskriterier

Aldre berettiget til at studere

18 år og ældre (Voksen, Ældre voksen)

Tager imod sunde frivillige

Ingen

Køn, der er berettiget til at studere

Alle

Beskrivelse

Inclusion Criteria:

  • Must sign the informed consent form.
  • Stable, tear lipid layer thickness ≤ 75 nm without contact lenses.
  • Successfully wearing bi-weekly or monthly replacement soft contact lenses in both eyes for a minimum of 5 days/week during the past 2 months prior to Visit 1.
  • Vision correctable to 20/25 Snellen (feet) or better at distance with habitual contact lenses at Visit 1.
  • Willing to wear lenses 5 days a week, 8 hours a day for at least 2 days during the study.
  • Demonstrate symptoms of contact lens discomfort.
  • Other protocol-defined inclusion criteria may apply.

Exclusion Criteria:

  • Routinely sleeping in lenses.
  • Any active eye inflammation or condition that contraindicates contact lens wear.
  • Any systemic diseases that could prevent successful contact lens wear.
  • Use of systemic or ocular medications that contraindicate lens wear.
  • Fit with only 1 contact lens.
  • Unwilling to discontinue the use of cosmetics (such as eyeliner, mascara, or eye shadow) or facial creams on or around the eyelids on Day 1 and Day 14 of the study.
  • Women of childbearing potential who are currently pregnant, test positive for pregnancy at Screening visit, breast feeding, or unwilling to use adequate birth control throughout the study.
  • Other protocol-defined exclusion criteria may apply.

Studieplan

Dette afsnit indeholder detaljer om studieplanen, herunder hvordan undersøgelsen er designet, og hvad undersøgelsen måler.

Hvordan er undersøgelsen tilrettelagt?

Design detaljer

  • Tildeling: Randomiseret
  • Interventionel model: Parallel tildeling
  • Maskning: Dobbelt

Våben og indgreb

Deltagergruppe / Arm
Intervention / Behandling
Eksperimentel: FID 114657
FID 114657 eye drops (10 ml), 1-2 drops instilled in each eye 10 minutes prior to inserting a new pair of habitual contact lenses and after removing them, daily for 2 weeks.
Medicin: FID 114657 eye drops (10 ml)
Lubricating eye drop for temporary relief of burning and irritation due to dryness of the eye
Enhed: Habitual contact lenses
Commercially marketed biweekly or monthly replacement soft contact lenses as prescribed by eye care practitioner, brand and power
Aktiv komparator: Saline Control
Saline control eye drops (15 ml), 1-2 drops instilled in each eye 10 minutes prior to inserting a new pair of habitual contact lenses and after removing them, daily for 2 weeks.
Enhed: Habitual contact lenses
Commercially marketed biweekly or monthly replacement soft contact lenses as prescribed by eye care practitioner, brand and power
Medicin: Saline control eye drops (15 ml)
Saline eye drops (15 ml)

Hvad måler undersøgelsen?

Primære resultatmål

Resultatmål
Foranstaltningsbeskrivelse
Tidsramme
Mean Pre-lens Tear Lipid Layer Thickness After 2 Hours of Lens Wear on Day 1
Tidsramme: Day 1, after 2 hours of lens wear
The pre-lens tear film is the layer of tears located on top of the contact lens (i.e., between the eye lid and the contact lens). The anterior-most layer of the pre-lens tear film consists of lipids. Lipid layer thickness (LLT) is measured with the LipiView® Interferometer. LLT is measured in interferometric color units (ICUs), where 1 ICU reflects about 1 nanometer (nm) lipid layer thickness. Higher values of LLT indicate a better lubrication of the ocular surface. A thicker tear lipid layer helps reduce evaporation and is indicative of a more stable tear film. The right eye only was used for this measure.
Day 1, after 2 hours of lens wear

Sekundære resultatmål

Resultatmål
Foranstaltningsbeskrivelse
Tidsramme
Mean Comfortable Lens Wear Time (Time Uncomfortable - Time Insertion) at Baseline and Day 14
Tidsramme: Baseline (Day 0), Day 14
At Baseline and on Day 14, comfort was collected through participant questionnaires regarding average and comfortable wear time. Participants filled in what time of day (over the past three days) they usually inserted their lenses, removed them, and at what time they usually became uncomfortable, or if they remained comfortable all day. Comfortable wear time was calculated as Time Uncomfortable minus Time Insertion. The participant rated both eyes together by providing one single rating. This outcome measure was prespecified for only FID 114657.
Baseline (Day 0), Day 14
Percentage of Participants That Experienced At Least 1 Unit Increase From Baseline Score to Day 14 for Overall Comfort With Lenses
Tidsramme: Baseline (Day 0), Day 14
Overall comfort was rated by the participant on a 10-point scale, where 1=Poor and 10=Excellent, at Day 0 for their habitual lenses and at Day 14 for the lenses worn for the study during use of the assigned drop regimen. A 1-unit increase indicates improvement. The participant rated both eyes together by providing one single rating.
Baseline (Day 0), Day 14
Mean Change From Baseline in Comfortable Lens Wear Time (Time Uncomfortable - Time Insertion) to Day 14
Tidsramme: Baseline (Day 0), Day 14
At Baseline and on Day 14, comfort was collected through participant questionnaires regarding average and comfortable wear time. Participants filled in what time of day (over the past three days) they usually inserted their lenses, removed them, and at what time they usually became uncomfortable, or if they remained comfortable all day. Comfortable wear time was calculated as Time Uncomfortable minus Time Insertion. A positive change from Baseline indicates improvement. The participant rated both eyes together by providing one single rating.
Baseline (Day 0), Day 14
Mean Pre-lens Tear Lipid Layer Thickness After 2 Hours of Lens Wear on Day 14
Tidsramme: Day 14, after 2 hours of lens wear
The pre-lens tear film is the layer of tears located on top of the contact lens (i.e., between the eye lid and the contact lens). The anterior-most layer of the pre-lens tear film consists of lipids. Lipid layer thickness (LLT) is measured with the LipiView® Interferometer. LLT is measured in interferometric color units (ICUs), where 1 ICU reflects about 1 nanometer (nm) lipid layer thickness. Higher values of LLT indicate a better lubrication of the ocular surface. A thicker tear lipid layer helps reduce evaporation and is indicative of a more stable tear film. The right eye only was used for this measure.
Day 14, after 2 hours of lens wear

Samarbejdspartnere og efterforskere

Det er her, du vil finde personer og organisationer, der er involveret i denne undersøgelse.

Sponsor

Alcon Research

Efterforskere

  • Studieleder: Clinical Manager, Pharmaceuticals, Global Medical Affairs, Alcon Research

Datoer for undersøgelser

Disse datoer sporer fremskridtene for indsendelser af undersøgelsesrekord og resumeresultater til ClinicalTrials.gov. Studieregistreringer og rapporterede resultater gennemgås af National Library of Medicine (NLM) for at sikre, at de opfylder specifikke kvalitetskontrolstandarder, før de offentliggøres på den offentlige hjemmeside.

Studer store datoer

Studiestart

1. november 2014

Primær færdiggørelse (Faktiske)

1. juli 2015

Studieafslutning (Faktiske)

1. juli 2015

Datoer for studieregistrering

Først indsendt

14. november 2014

Først indsendt, der opfyldte QC-kriterier

17. november 2014

Først opslået (Skøn)

18. november 2014

Opdateringer af undersøgelsesjournaler

Sidste opdatering sendt (Skøn)

6. oktober 2016

Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier

4. oktober 2016

Sidst verificeret

1. august 2016

Mere information

Begreber relateret til denne undersøgelse

Nøgleord

Yderligere relevante MeSH-vilkår

Andre undersøgelses-id-numre

  • LCO242-P001

Disse oplysninger blev hentet direkte fra webstedet clinicaltrials.gov uden ændringer. Hvis du har nogen anmodninger om at ændre, fjerne eller opdatere dine undersøgelsesoplysninger, bedes du kontakte register@clinicaltrials.gov. Så snart en ændring er implementeret på clinicaltrials.gov, vil denne også blive opdateret automatisk på vores hjemmeside .

Abonner