Formula Identification (FID) 114657 in Contact Lens Wearers
4 de outubro de 2016 atualizado por: Alcon Research
Evaluation of a Lubricant Eye Drop on Tear Lipid Layer Thickness in Contact Lens Wearers
The purpose of this study is to evaluate the thickness of the pre-lens tear lipid layer after 2 hours of lens wear with use of FID 114657 compared to saline control.
Visão geral do estudo
Status
Concluído
Condições
Tipo de estudo
Intervencional
Inscrição (Real)
234
Estágio
- Não aplicável
Critérios de participação
Os pesquisadores procuram pessoas que se encaixem em uma determinada descrição, chamada de critérios de elegibilidade. Alguns exemplos desses critérios são a condição geral de saúde de uma pessoa ou tratamentos anteriores.
Critérios de elegibilidade
Idades elegíveis para estudo
18 anos e mais velhos (Adulto, Adulto mais velho)
Aceita Voluntários Saudáveis
Não
Gêneros Elegíveis para o Estudo
Tudo
Descrição
Inclusion Criteria:
- Must sign the informed consent form.
- Stable, tear lipid layer thickness ≤ 75 nm without contact lenses.
- Successfully wearing bi-weekly or monthly replacement soft contact lenses in both eyes for a minimum of 5 days/week during the past 2 months prior to Visit 1.
- Vision correctable to 20/25 Snellen (feet) or better at distance with habitual contact lenses at Visit 1.
- Willing to wear lenses 5 days a week, 8 hours a day for at least 2 days during the study.
- Demonstrate symptoms of contact lens discomfort.
- Other protocol-defined inclusion criteria may apply.
Exclusion Criteria:
- Routinely sleeping in lenses.
- Any active eye inflammation or condition that contraindicates contact lens wear.
- Any systemic diseases that could prevent successful contact lens wear.
- Use of systemic or ocular medications that contraindicate lens wear.
- Fit with only 1 contact lens.
- Unwilling to discontinue the use of cosmetics (such as eyeliner, mascara, or eye shadow) or facial creams on or around the eyelids on Day 1 and Day 14 of the study.
- Women of childbearing potential who are currently pregnant, test positive for pregnancy at Screening visit, breast feeding, or unwilling to use adequate birth control throughout the study.
- Other protocol-defined exclusion criteria may apply.
Plano de estudo
Esta seção fornece detalhes do plano de estudo, incluindo como o estudo é projetado e o que o estudo está medindo.
Como o estudo é projetado?
Detalhes do projeto
- Alocação: Randomizado
- Modelo Intervencional: Atribuição Paralela
- Mascaramento: Dobro
Armas e Intervenções
Grupo de Participantes / Braço |
Intervenção / Tratamento |
|---|---|
|
Experimental: FID 114657
FID 114657 eye drops (10 ml), 1-2 drops instilled in each eye 10 minutes prior to inserting a new pair of habitual contact lenses and after removing them, daily for 2 weeks.
|
Lubricating eye drop for temporary relief of burning and irritation due to dryness of the eye
Commercially marketed biweekly or monthly replacement soft contact lenses as prescribed by eye care practitioner, brand and power
|
|
Comparador Ativo: Saline Control
Saline control eye drops (15 ml), 1-2 drops instilled in each eye 10 minutes prior to inserting a new pair of habitual contact lenses and after removing them, daily for 2 weeks.
|
Commercially marketed biweekly or monthly replacement soft contact lenses as prescribed by eye care practitioner, brand and power
Saline eye drops (15 ml)
|
O que o estudo está medindo?
Medidas de resultados primários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Mean Pre-lens Tear Lipid Layer Thickness After 2 Hours of Lens Wear on Day 1
Prazo: Day 1, after 2 hours of lens wear
|
The pre-lens tear film is the layer of tears located on top of the contact lens (i.e., between the eye lid and the contact lens).
The anterior-most layer of the pre-lens tear film consists of lipids.
Lipid layer thickness (LLT) is measured with the LipiView® Interferometer.
LLT is measured in interferometric color units (ICUs), where 1 ICU reflects about 1 nanometer (nm) lipid layer thickness.
Higher values of LLT indicate a better lubrication of the ocular surface.
A thicker tear lipid layer helps reduce evaporation and is indicative of a more stable tear film.
The right eye only was used for this measure.
|
Day 1, after 2 hours of lens wear
|
Medidas de resultados secundários
Medida de resultado |
Descrição da medida |
Prazo |
|---|---|---|
|
Mean Comfortable Lens Wear Time (Time Uncomfortable - Time Insertion) at Baseline and Day 14
Prazo: Baseline (Day 0), Day 14
|
At Baseline and on Day 14, comfort was collected through participant questionnaires regarding average and comfortable wear time.
Participants filled in what time of day (over the past three days) they usually inserted their lenses, removed them, and at what time they usually became uncomfortable, or if they remained comfortable all day.
Comfortable wear time was calculated as Time Uncomfortable minus Time Insertion.
The participant rated both eyes together by providing one single rating.
This outcome measure was prespecified for only FID 114657.
|
Baseline (Day 0), Day 14
|
|
Percentage of Participants That Experienced At Least 1 Unit Increase From Baseline Score to Day 14 for Overall Comfort With Lenses
Prazo: Baseline (Day 0), Day 14
|
Overall comfort was rated by the participant on a 10-point scale, where 1=Poor and 10=Excellent, at Day 0 for their habitual lenses and at Day 14 for the lenses worn for the study during use of the assigned drop regimen.
A 1-unit increase indicates improvement.
The participant rated both eyes together by providing one single rating.
|
Baseline (Day 0), Day 14
|
|
Mean Change From Baseline in Comfortable Lens Wear Time (Time Uncomfortable - Time Insertion) to Day 14
Prazo: Baseline (Day 0), Day 14
|
At Baseline and on Day 14, comfort was collected through participant questionnaires regarding average and comfortable wear time.
Participants filled in what time of day (over the past three days) they usually inserted their lenses, removed them, and at what time they usually became uncomfortable, or if they remained comfortable all day.
Comfortable wear time was calculated as Time Uncomfortable minus Time Insertion.
A positive change from Baseline indicates improvement.
The participant rated both eyes together by providing one single rating.
|
Baseline (Day 0), Day 14
|
|
Mean Pre-lens Tear Lipid Layer Thickness After 2 Hours of Lens Wear on Day 14
Prazo: Day 14, after 2 hours of lens wear
|
The pre-lens tear film is the layer of tears located on top of the contact lens (i.e., between the eye lid and the contact lens).
The anterior-most layer of the pre-lens tear film consists of lipids.
Lipid layer thickness (LLT) is measured with the LipiView® Interferometer.
LLT is measured in interferometric color units (ICUs), where 1 ICU reflects about 1 nanometer (nm) lipid layer thickness.
Higher values of LLT indicate a better lubrication of the ocular surface.
A thicker tear lipid layer helps reduce evaporation and is indicative of a more stable tear film.
The right eye only was used for this measure.
|
Day 14, after 2 hours of lens wear
|
Colaboradores e Investigadores
É aqui que você encontrará pessoas e organizações envolvidas com este estudo.
Patrocinador
Investigadores
- Diretor de estudo: Clinical Manager, Pharmaceuticals, Global Medical Affairs, Alcon Research
Datas de registro do estudo
Essas datas acompanham o progresso do registro do estudo e os envios de resumo dos resultados para ClinicalTrials.gov. Os registros do estudo e os resultados relatados são revisados pela National Library of Medicine (NLM) para garantir que atendam aos padrões específicos de controle de qualidade antes de serem publicados no site público.
Datas Principais do Estudo
Início do estudo
1 de novembro de 2014
Conclusão Primária (Real)
1 de julho de 2015
Conclusão do estudo (Real)
1 de julho de 2015
Datas de inscrição no estudo
Enviado pela primeira vez
14 de novembro de 2014
Enviado pela primeira vez que atendeu aos critérios de CQ
17 de novembro de 2014
Primeira postagem (Estimativa)
18 de novembro de 2014
Atualizações de registro de estudo
Última Atualização Postada (Estimativa)
6 de outubro de 2016
Última atualização enviada que atendeu aos critérios de controle de qualidade
4 de outubro de 2016
Última verificação
1 de agosto de 2016
Mais Informações
Termos relacionados a este estudo
Palavras-chave
Termos MeSH relevantes adicionais
Outros números de identificação do estudo
- LCO242-P001
Essas informações foram obtidas diretamente do site clinicaltrials.gov sem nenhuma alteração. Se você tiver alguma solicitação para alterar, remover ou atualizar os detalhes do seu estudo, entre em contato com register@clinicaltrials.gov. Assim que uma alteração for implementada em clinicaltrials.gov, ela também será atualizada automaticamente em nosso site .