Formula Identification (FID) 114657 in Contact Lens Wearers
4 ottobre 2016 aggiornato da: Alcon Research
Evaluation of a Lubricant Eye Drop on Tear Lipid Layer Thickness in Contact Lens Wearers
The purpose of this study is to evaluate the thickness of the pre-lens tear lipid layer after 2 hours of lens wear with use of FID 114657 compared to saline control.
Panoramica dello studio
Stato
Completato
Condizioni
Tipo di studio
Interventistico
Iscrizione (Effettivo)
234
Fase
- Non applicabile
Criteri di partecipazione
I ricercatori cercano persone che corrispondano a una certa descrizione, chiamata criteri di ammissibilità. Alcuni esempi di questi criteri sono le condizioni generali di salute di una persona o trattamenti precedenti.
Criteri di ammissibilità
Età idonea allo studio
18 anni e precedenti (Adulto, Adulto più anziano)
Accetta volontari sani
No
Sessi ammissibili allo studio
Tutto
Descrizione
Inclusion Criteria:
- Must sign the informed consent form.
- Stable, tear lipid layer thickness ≤ 75 nm without contact lenses.
- Successfully wearing bi-weekly or monthly replacement soft contact lenses in both eyes for a minimum of 5 days/week during the past 2 months prior to Visit 1.
- Vision correctable to 20/25 Snellen (feet) or better at distance with habitual contact lenses at Visit 1.
- Willing to wear lenses 5 days a week, 8 hours a day for at least 2 days during the study.
- Demonstrate symptoms of contact lens discomfort.
- Other protocol-defined inclusion criteria may apply.
Exclusion Criteria:
- Routinely sleeping in lenses.
- Any active eye inflammation or condition that contraindicates contact lens wear.
- Any systemic diseases that could prevent successful contact lens wear.
- Use of systemic or ocular medications that contraindicate lens wear.
- Fit with only 1 contact lens.
- Unwilling to discontinue the use of cosmetics (such as eyeliner, mascara, or eye shadow) or facial creams on or around the eyelids on Day 1 and Day 14 of the study.
- Women of childbearing potential who are currently pregnant, test positive for pregnancy at Screening visit, breast feeding, or unwilling to use adequate birth control throughout the study.
- Other protocol-defined exclusion criteria may apply.
Piano di studio
Questa sezione fornisce i dettagli del piano di studio, compreso il modo in cui lo studio è progettato e ciò che lo studio sta misurando.
Come è strutturato lo studio?
Dettagli di progettazione
- Assegnazione: Randomizzato
- Modello interventistico: Assegnazione parallela
- Mascheramento: Doppio
Armi e interventi
Gruppo di partecipanti / Arm |
Intervento / Trattamento |
|---|---|
|
Sperimentale: FID 114657
FID 114657 eye drops (10 ml), 1-2 drops instilled in each eye 10 minutes prior to inserting a new pair of habitual contact lenses and after removing them, daily for 2 weeks.
|
Lubricating eye drop for temporary relief of burning and irritation due to dryness of the eye
Commercially marketed biweekly or monthly replacement soft contact lenses as prescribed by eye care practitioner, brand and power
|
|
Comparatore attivo: Saline Control
Saline control eye drops (15 ml), 1-2 drops instilled in each eye 10 minutes prior to inserting a new pair of habitual contact lenses and after removing them, daily for 2 weeks.
|
Commercially marketed biweekly or monthly replacement soft contact lenses as prescribed by eye care practitioner, brand and power
Saline eye drops (15 ml)
|
Cosa sta misurando lo studio?
Misure di risultato primarie
Misura del risultato |
Misura Descrizione |
Lasso di tempo |
|---|---|---|
|
Mean Pre-lens Tear Lipid Layer Thickness After 2 Hours of Lens Wear on Day 1
Lasso di tempo: Day 1, after 2 hours of lens wear
|
The pre-lens tear film is the layer of tears located on top of the contact lens (i.e., between the eye lid and the contact lens).
The anterior-most layer of the pre-lens tear film consists of lipids.
Lipid layer thickness (LLT) is measured with the LipiView® Interferometer.
LLT is measured in interferometric color units (ICUs), where 1 ICU reflects about 1 nanometer (nm) lipid layer thickness.
Higher values of LLT indicate a better lubrication of the ocular surface.
A thicker tear lipid layer helps reduce evaporation and is indicative of a more stable tear film.
The right eye only was used for this measure.
|
Day 1, after 2 hours of lens wear
|
Misure di risultato secondarie
Misura del risultato |
Misura Descrizione |
Lasso di tempo |
|---|---|---|
|
Mean Comfortable Lens Wear Time (Time Uncomfortable - Time Insertion) at Baseline and Day 14
Lasso di tempo: Baseline (Day 0), Day 14
|
At Baseline and on Day 14, comfort was collected through participant questionnaires regarding average and comfortable wear time.
Participants filled in what time of day (over the past three days) they usually inserted their lenses, removed them, and at what time they usually became uncomfortable, or if they remained comfortable all day.
Comfortable wear time was calculated as Time Uncomfortable minus Time Insertion.
The participant rated both eyes together by providing one single rating.
This outcome measure was prespecified for only FID 114657.
|
Baseline (Day 0), Day 14
|
|
Percentage of Participants That Experienced At Least 1 Unit Increase From Baseline Score to Day 14 for Overall Comfort With Lenses
Lasso di tempo: Baseline (Day 0), Day 14
|
Overall comfort was rated by the participant on a 10-point scale, where 1=Poor and 10=Excellent, at Day 0 for their habitual lenses and at Day 14 for the lenses worn for the study during use of the assigned drop regimen.
A 1-unit increase indicates improvement.
The participant rated both eyes together by providing one single rating.
|
Baseline (Day 0), Day 14
|
|
Mean Change From Baseline in Comfortable Lens Wear Time (Time Uncomfortable - Time Insertion) to Day 14
Lasso di tempo: Baseline (Day 0), Day 14
|
At Baseline and on Day 14, comfort was collected through participant questionnaires regarding average and comfortable wear time.
Participants filled in what time of day (over the past three days) they usually inserted their lenses, removed them, and at what time they usually became uncomfortable, or if they remained comfortable all day.
Comfortable wear time was calculated as Time Uncomfortable minus Time Insertion.
A positive change from Baseline indicates improvement.
The participant rated both eyes together by providing one single rating.
|
Baseline (Day 0), Day 14
|
|
Mean Pre-lens Tear Lipid Layer Thickness After 2 Hours of Lens Wear on Day 14
Lasso di tempo: Day 14, after 2 hours of lens wear
|
The pre-lens tear film is the layer of tears located on top of the contact lens (i.e., between the eye lid and the contact lens).
The anterior-most layer of the pre-lens tear film consists of lipids.
Lipid layer thickness (LLT) is measured with the LipiView® Interferometer.
LLT is measured in interferometric color units (ICUs), where 1 ICU reflects about 1 nanometer (nm) lipid layer thickness.
Higher values of LLT indicate a better lubrication of the ocular surface.
A thicker tear lipid layer helps reduce evaporation and is indicative of a more stable tear film.
The right eye only was used for this measure.
|
Day 14, after 2 hours of lens wear
|
Collaboratori e investigatori
Qui è dove troverai le persone e le organizzazioni coinvolte in questo studio.
Sponsor
Investigatori
- Direttore dello studio: Clinical Manager, Pharmaceuticals, Global Medical Affairs, Alcon Research
Studiare le date dei record
Queste date tengono traccia dell'avanzamento della registrazione dello studio e dell'invio dei risultati di sintesi a ClinicalTrials.gov. I record degli studi e i risultati riportati vengono esaminati dalla National Library of Medicine (NLM) per assicurarsi che soddisfino specifici standard di controllo della qualità prima di essere pubblicati sul sito Web pubblico.
Studia le date principali
Inizio studio
1 novembre 2014
Completamento primario (Effettivo)
1 luglio 2015
Completamento dello studio (Effettivo)
1 luglio 2015
Date di iscrizione allo studio
Primo inviato
14 novembre 2014
Primo inviato che soddisfa i criteri di controllo qualità
17 novembre 2014
Primo Inserito (Stima)
18 novembre 2014
Aggiornamenti dei record di studio
Ultimo aggiornamento pubblicato (Stima)
6 ottobre 2016
Ultimo aggiornamento inviato che soddisfa i criteri QC
4 ottobre 2016
Ultimo verificato
1 agosto 2016
Maggiori informazioni
Termini relativi a questo studio
Parole chiave
Termini MeSH pertinenti aggiuntivi
Altri numeri di identificazione dello studio
- LCO242-P001
Queste informazioni sono state recuperate direttamente dal sito web clinicaltrials.gov senza alcuna modifica. In caso di richieste di modifica, rimozione o aggiornamento dei dettagli dello studio, contattare register@clinicaltrials.gov. Non appena verrà implementata una modifica su clinicaltrials.gov, questa verrà aggiornata automaticamente anche sul nostro sito web .