Denne side blev automatisk oversat, og nøjagtigheden af ​​oversættelsen er ikke garanteret. Der henvises til engelsk version for en kildetekst.

Evaluation of Occlusal Contact Distribution in Digitally Fabricated Implant-Retained Fixed Partial Dentures in Mandibular Kennedy Class II Patients Following Artificial Intelligence Bite Optimization: A Quasi-Experimental Study (Quasi)

14. juni 2026 opdateret af: Noha Waleed Fathalla Moustafa Barakat, Cairo University
The aim of the study is to evaluate the occlusal contact distribution in digitally fabricated implant-retained fixed partial dentures in mandibular Kennedy Class II patients before and after artificial intelligence bite optimization.

Studieoversigt

Status

Ikke rekrutterer endnu

Betingelser

Intervention / Behandling

Detaljeret beskrivelse

The recruited patients will be screened for proper bone architecture and CBCTs will be taken for proper virtual implant planning. Two implants will be placed in the edentulous span in all participants. All surgical steps will be held according to standard protocol. After the implant osseointegration period, the prosthetic phase will start with implant exposure and placement of multiunit abutments. After gingival healing, intraoral scans for the implants timing using abutment level scan bodies will be taken. Then, the fabrication of implant-retained fixed partial denture will be done with a fully digital workflow. The data acquisition will take place by scanning the patients using Medit intraoral scanner. Then, the scanned stls will be imported in 3shape software version 2024 and bite optimization module in it will be run. It automatically recalculates the position of the bite relation using its integrated AI. After that, the resulted STLs will be exported and re-imported to ExoCAD software to design the prostheses.

Undersøgelsestype

Interventionel

Tilmelding (Anslået)

15

Fase

  • Ikke anvendelig

Kontakter og lokationer

Dette afsnit indeholder kontaktoplysninger for dem, der udfører undersøgelsen, og oplysninger om, hvor denne undersøgelse udføres.

Studiekontakt

Undersøgelse Kontakt Backup

Studiesteder

Deltagelseskriterier

Forskere leder efter personer, der passer til en bestemt beskrivelse, kaldet berettigelseskriterier. Nogle eksempler på disse kriterier er en persons generelle helbredstilstand eller tidligere behandlinger.

Berettigelseskriterier

Aldre berettiget til at studere

  • Voksen
  • Ældre voksen

Tager imod sunde frivillige

Ja

Beskrivelse

Inclusion Criteria:

  1. Patients with a unilateral mandibular distal extension area (Kennedy Class II partially edentulous mandibular arch) and who are indicated for the insertion of 2 implants.
  2. Fully dentate opposing maxillary arch or restored with a suitable, well constructed fixed prosthesis.
  3. The remaining teeth should be in good periodontal health, with no signs of inflammation or movement.
  4. The edentulous area should be covered by a healthy, firm mucoperiosteum, with no or minimal tissue undercut.
  5. Patient should be with class I occlusion.
  6. No occlusal disorder; stable jaw relation.
  7. No TMD signs or symptoms.
  8. Patients should be in generally good health and free of systemic conditions that can affect the implant treatment, such as diabetes mellitus.

Exclusion Criteria:

  1. Patients with psychological or mental disorders.
  2. Patients with insufficient interarch space.
  3. Patients with parafunctional habits, such as bruxism.
  4. After the healing phase and exactly before the prosthetic phase, if the inserted implants showed any signs of peri-implantitis or aggressive crestal bone resorption, then this case will be excluded and replaced with another case.

Studieplan

Dette afsnit indeholder detaljer om studieplanen, herunder hvordan undersøgelsen er designet, og hvad undersøgelsen måler.

Hvordan er undersøgelsen tilrettelagt?

Design detaljer

  • Primært formål: Behandling
  • Tildeling: Ikke-randomiseret
  • Interventionel model: Sekventiel tildeling
  • Maskning: Ingen (Åben etiket)

Våben og indgreb

Deltagergruppe / Arm
Intervention / Behandling
Eksperimentel: Before
The recruited patients will be screened for proper bone architecture and CBCTs will be taken for proper virtual implant planning. Two implants will be placed in the edentulous span in all participants. All surgical steps will be held according to standard protocol. After the implant osseointegration period, the prosthetic phase will start with implant exposure and placement of multiunit abutments. After gingival healing, intraoral scans for the implants timing using abutment level scan bodies will be taken. Then, the fabrication of implant-retained fixed partial denture will be done with a fully digital workflow.
Procedure: Before
The recruited patients will be screened for proper bone architecture and CBCTs will be taken for proper virtual implant planning. Two implants will be placed in the edentulous span in all participants. All surgical steps will be held according to standard protocol. After the implant osseointegration period, the prosthetic phase will start with implant exposure and placement of multiunit abutments. After gingival healing, intraoral scans for the implants timing using abutment level scan bodies will be taken. Then, the fabrication of implant-retained fixed partial denture will be done with a fully digital workflow.
Aktiv komparator: After
The data acquisition will take place by scanning the patients using Medit intraoral scanner. Then, the scanned stls will be imported in 3shape software version 2024 and bite optimization module in it will be run. It automatically recalculates the position of the bite relation using its integrated AI. After that, the resulted STLs will be exported and re-imported to ExoCAD software to design the prostheses.
Procedure: After
The data acquisition will take place by scanning the patients using Medit intraoral scanner. Then, the scanned stls will be imported in 3shape software version 2024 and bite optimization module in it will be run. It automatically recalculates the position of the bite relation using its integrated AI. After that, the resulted STLs will be exported and re-imported to ExoCAD software to design the prostheses.

Hvad måler undersøgelsen?

Primære resultatmål

Resultatmål
Foranstaltningsbeskrivelse
Tidsramme
Occlusal contact distribution
Tidsramme: From enrollment till the end of the study 17 weeks

The 1ry outcome will be assessed on the day of the prosthesis delivery. First, the reading of the occlusal contact distribution will be taken by using the T-scan device before seating the prosthesis intraorally.

Then, the retained fixed prosthesis will be seated on the implant abutment, and the prosthetic screw will be screwed to the optimum torque. Another reading of the occlusal contact distribution will be taken by using the T-scan device after seating and torquing the prosthesis intraorally. Finally, the screw access channels will be closed by flowable resin composite material.
From enrollment till the end of the study 17 weeks

Samarbejdspartnere og efterforskere

Det er her, du vil finde personer og organisationer, der er involveret i denne undersøgelse.

Sponsor

Cairo University

Datoer for undersøgelser

Disse datoer sporer fremskridtene for indsendelser af undersøgelsesrekord og resumeresultater til ClinicalTrials.gov. Studieregistreringer og rapporterede resultater gennemgås af National Library of Medicine (NLM) for at sikre, at de opfylder specifikke kvalitetskontrolstandarder, før de offentliggøres på den offentlige hjemmeside.

Studer store datoer

Studiestart (Anslået)

1. juni 2026

Primær færdiggørelse (Anslået)

1. september 2026

Studieafslutning (Anslået)

1. september 2026

Datoer for studieregistrering

Først indsendt

14. juni 2026

Først indsendt, der opfyldte QC-kriterier

14. juni 2026

Først opslået (Faktiske)

18. juni 2026

Opdateringer af undersøgelsesjournaler

Sidste opdatering sendt (Faktiske)

18. juni 2026

Sidste opdatering indsendt, der opfyldte kvalitetskontrolkriterier

14. juni 2026

Sidst verificeret

1. juni 2026

Mere information

Begreber relateret til denne undersøgelse

Nøgleord

Yderligere relevante MeSH-vilkår

Andre undersøgelses-id-numre

  • 24226

Plan for individuelle deltagerdata (IPD)

Planlægger du at dele individuelle deltagerdata (IPD)?

INGEN

Lægemiddel- og udstyrsoplysninger, undersøgelsesdokumenter

Studerer et amerikansk FDA-reguleret lægemiddelprodukt

Ingen

Studerer et amerikansk FDA-reguleret enhedsprodukt

Ingen

produkt fremstillet i og eksporteret fra U.S.A.

Ingen

Disse oplysninger blev hentet direkte fra webstedet clinicaltrials.gov uden ændringer. Hvis du har nogen anmodninger om at ændre, fjerne eller opdatere dine undersøgelsesoplysninger, bedes du kontakte register@clinicaltrials.gov. Så snart en ændring er implementeret på clinicaltrials.gov, vil denne også blive opdateret automatisk på vores hjemmeside .

Kliniske forsøg med Delvis tandløs mandible

Søg i lignende forsøg

Sponsorer og samarbejdspartnere

Medicinske tilstande

Narkotikainterventioner

CROs by country

CROs in Suriname

Betingelser

Sjældne sygdomme

Narkotikainterventioner

Kosttilskud

Sponsor / samarbejdspartnere

Placeringer

Abonner