Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Effect of Different Root Canal Instruments on Removal of Endotoxins From Necrotic Root Canals

30 janvier 2019 mis à jour par: Heba Elasfouri

Effect of Different Root Canal Instruments on Removal of Endotoxins From Necrotic Root Canals (A Randomized Clinical Trial)

• Grouping: The patients will be randomly assigned into two equal groups Group : OneShape Group: ProtaperNext

  • Endodontics procedure steps:

    1. Patient will be anesthetized by using infiltration local anesthesia or nerve block according to the tooth location in mandibular or maxillary arch respectively.
    2. All caries will be removed, then isolation using rubber dam, the crown and surrounding structures will be disinfected with 30% H2O2( hydrogen peroxide) for 30 seconds, followed by 2.5% NaOCl for the same period of time and then inactivated with 5% sodium thiosulphate.

    2- For the access cavity preparation, a sterile/apyrogenic high-speed diamond bur will be used in conjunction with manual irrigation with sterile saline. Before entering the pulp chamber, the access cavity will be disinfected according to the protocol described above.

    2- Root canal length will be determined, by preoperative radiograph then (S1) will be taken by introducing a sterile/apyrogenic paper point #15/ 20 (5paper points) into the full length of the canal and left there for 1 minute. Then, the sample will be placed in an apyrogenic glass and stored in -20°. Then canal length will be confirmed by apex locator.

    3- Cleaning and shaping will be done using either One shape or Protaper next rotary instruments in crown down preparation technique with the use of in an endodontic motor according to the manufacturer instructions, the canals will be thoroughly irrigated using 3ml of 2.5% Sodium hypochlorite between every subsequent instrument.

    4-After root canal preparation, NaOCl will be inactivated with 5 mL of sterile 5% sodium thiosulphate for 1 minute, which then will be removed with 5 mL of sterile/apyrogenic saline solution., which then will be removed with 5 mL of sterile/apyrogenic saline solution. second endotoxin sample (S2) will be taken from the root canals. (5 paper point size of the master cone).

    5- After completion of instrumentation and irrigation, obturation will be done using size 30/ 0.4 taper gutta-percha cones and auxiliaries as needed using the modified single cone technique.

Determination of Endotoxin Concentration Human endotoxin (ET) ELISA Kit will be used to measure endotoxin concentrations in the root canals before and after chemomechanical procedures.

Aperçu de l'étude

Statut

Complété

Les conditions

Description détaillée

Materials and Methods:

A. Trial Design:

The trial design of this study will be a prospective, parallel, Randomized clinical trial (RCT). The clinical trial involves research using human participants. In this trial, the participants will be randomly allocated to receive one of two interventions according to the protocol created by the investigator; one of these interventions will be the control. The investigator is to determine the safety and/or the efficacy of the interventions after being received by the participants by measuring the outcomes because the outcomes will be measured, RCTs are quantitative studies.

• Grouping: The patients will be randomly assigned into two equal groups according to the type of rotary endodontic system used during root canal preparation: Group : OneShape Group : ProtaperNext

  • Endodontics procedure steps:

    1. Patient will be anesthetized by using infiltration local anesthesia or nerve block according to the tooth location in mandibular or maxillary arch respectively.
    2. All caries will be removed, then isolation using rubber dam, the crown and surrounding structures will be disinfected with 30% H2O2 ( hydrogen peroxide) for 30 seconds, followed by 2.5% NaOCl for the same period of time and then inactivated with 5% sodium thiosulphate.

    2- For the access cavity preparation, a sterile/apyrogenic high-speed diamond bur will be used in conjunction with manual irrigation with sterile saline. Before entering the pulp chamber, the access cavity will be disinfected according to the protocol described above.

    2- Root canal length will be determined, by preoperative radiograph then (S1) will be taken by introducing a sterile/apyrogenic paper point #15/ 20 (5paper points) into the full length of the canal and left there for 1 minute. Then, the sample will be placed in an apyrogenic glass and stored in -20°. Then canal length will be confirmed by apex locator.

    3- Cleaning and shaping will be done using either One shape or Protaper next rotary instruments in crown down preparation technique with the use of in an endodontic motor according to the manufacturer instructions, the canals will be thoroughly irrigated using 3ml of 2.5% Sodium hypochlorite between every subsequent instrument.

    4-After root canal preparation, NaOCl will be inactivated with 5 mL of sterile 5% sodium thiosulphate for 1 minute, which then will be removed with 5 mL of sterile/apyrogenic saline solution., which then will be removed with 5 mL of sterile/apyrogenic saline solution. second endotoxin sample (S2) will be taken from the root canals. (5 paper point size of the master cone).

    5- After completion of instrumentation and irrigation, obturation will be done using size 30/ 0.4 taper gutta-percha cones and auxiliaries as needed using the modified single cone technique.

    6- All procedures will be done in a single-visit, checked radiographically and recorded in the procedure chart.

Determination of Endotoxin Concentration Human endotoxin (ET) ELISA Kit will be used to measure endotoxin concentrations in the root canals before and after chemomechanical procedures.

As a parameter for calculation of the amount of endotoxins in the root canal samples, a standard curve will be plotted by using the endotoxin of known concentration supplied by the kit according to the manufacturer's instructions.

The test procedure will be performed according to the manufacturer's instructions. And the absorbance of endotoxins will be measured by using spectrophotometer at wavelength 450 nm.

D. Outcomes:

Evaluation of the antibacterial effect of using One Shape and Protaper Next rotary endodontic NiTi instruments for root canal preparation using Human endotoxin (ET) ELISA Kit

E. Randomization:

The randomization will be done in three steps:

  1. Sequence generation:

    The random sequence generation will be done for the patients' numbers (from 1 to 38) using Microsoft Excel software.

    Allocation concealment mechanism:

    The allocation concealment will be phone-based.

  2. Implementation:

The random sequence will be done by a colleague and the random sequence table will be kept with him. After eligibility assessment, the operator would call the colleague for eligibility checking and to know the group assignment for the patients.

F. Blinding:

Participants, outcome assessor and data analyst will be blinded in this trial. The operator will be not blinded.

Type d'étude

Interventionnel

Inscription (Réel)

30

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Lieux d'étude

      • Cairo, Egypte
        • Cairo University Faculty of Dentistry

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

20 ans à 60 ans (Adulte)

Accepte les volontaires sains

Oui

Sexes éligibles pour l'étude

Tout

La description

Inclusion Criteria:

  • Patients who are medically free and good health.
  • Patient 's age between 20-60years.
  • Patients with posterior teeth diagnosed clinically and confirmed by thermal sensitivity tests as teeth with necrotic pulp.
  • Positive patient's acceptance for participation in the study.

Exclusion Criteria:

  • -Pregnancy or lactation
  • Medically compromised patients -Patients aged less than20 or more than 60 years.-
  • Patients unable to give informed consent.
  • Previous endodontic therapy of the affected tooth .
  • Teeth diagnosed with vital pulp.
  • Teeth with periodontal pocket more than 3mm deep.
  • Teeth with abnormal anatomy and calcified canals.
  • Teeth with caries below the bony level (non-restorable tooth).
  • Teeth with periapical swelling or sinus tract.

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Autre
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation parallèle
  • Masquage: Tripler

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: one shape
single file rotary system
canal fluid sample before and after root canal instrumentation
Comparateur actif: protaper next
multiple file rotary system
canal fluid sample before and after root canal instrumentation

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
endotoxin change
Délai: Samples will be collected before and after chemomechanical preparation over 2 months
Human endotoxin (ET) ELISA Kit will be used to measure endotoxin concentrations in the root canals before and after chemomechanical procedures.
Samples will be collected before and after chemomechanical preparation over 2 months

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Parrainer

Les enquêteurs

  • Chercheur principal: heba elasfouri, lecturer, Cairo University
  • Chercheur principal: marwa bedier, lecturer, Cairo University

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

10 août 2018

Achèvement primaire (Réel)

1 novembre 2018

Achèvement de l'étude (Réel)

10 novembre 2018

Dates d'inscription aux études

Première soumission

16 août 2018

Première soumission répondant aux critères de contrôle qualité

20 août 2018

Première publication (Réel)

22 août 2018

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

31 janvier 2019

Dernière mise à jour soumise répondant aux critères de contrôle qualité

30 janvier 2019

Dernière vérification

1 janvier 2019

Plus d'information

Termes liés à cette étude

Autres numéros d'identification d'étude

  • CEBD-CU-2018-8-17

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

Essais cliniques sur one shape

S'abonner