Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Un essai clinique à bouche divisée évaluant le taux de défaillance des obligations d'un nouvel adhésif orthodontique sans gravure

5 novembre 2026 mis à jour par: Maria Doughan, University of Maryland, Baltimore

This randomized, split-mouth clinical trial will evaluate a new orthodontic adhesive that eliminates the need for acid etching before bracket bonding. Conventional orthodontic bonding requires etching enamel with phosphoric acid, which can weaken the outer enamel layer and increase the risk of white spot lesions and enamel damage. The etch-free adhesive under investigation is designed to simplify the bonding procedure while preserving enamel integrity.

Twenty orthodontic patients starting treatment with braces will participate. For each patient, one side of the mouth (left or right) will be randomly assigned to receive the etch-free adhesive, while the opposite side will receive the conventional adhesive with acid etching. This intra-patient design allows a direct comparison under identical oral conditions.

Participants will be followed for 12 months. Bracket failures, bonding time, ease of adhesive removal, enamel surface condition after debonding, and the presence of white spot lesions will be recorded. If effective, the etch-free adhesive may reduce enamel damage without compromising bond strength, providing a safer and more efficient bonding option for orthodontic patients.

Aperçu de l'étude

Description détaillée

This is a prospective, randomized, split-mouth clinical trial designed to compare the bond failure rate, bonding efficiency, and enamel outcomes of a novel etch-free orthodontic adhesive with a conventional acid-etch adhesive over a 12-month follow-up period.

Background and Rationale Conventional orthodontic bonding requires phosphoric acid etching to create surface roughness for adhesive retention. While effective, this process irreversibly demineralizes enamel and may increase susceptibility to white spot lesions (WSLs), decalcification, and enamel fractures during bracket removal.

A new generation of self-adhesive bonding materials eliminates the etching step by bonding directly to enamel. This simplified approach may preserve enamel integrity, reduce chair time, and improve the patient experience while maintaining adequate bond strength.

The split-mouth design allows direct intra-patient comparison of the two bonding methods under identical oral conditions (hygiene, diet, occlusal forces), reducing inter-patient variability.

Study Design Type: Prospective, randomized, split-mouth trial

Population: 20 patients (ages ≥12 years) with permanent dentition undergoing fixed orthodontic treatment

Follow-up duration: 12 months post-bonding

Setting: University-based orthodontic clinic

Interventions Test Adhesive (Experimental): A commercially available etch-free adhesive system applied directly to enamel without acid etching or separate priming.

Control Adhesive: Conventional orthodontic adhesive applied following 37% phosphoric acid etching, primer, and adhesive placement.

Randomization and Bonding Procedure Each patient will receive both adhesives-one on the left side and one on the right-randomly assigned using a computer-generated randomization schedule and sealed envelopes.

Bonding will be performed by a calibrated operator using identical brackets and bonding techniques.

Control side: 37% phosphoric acid etch (30 seconds), rinse, dry, primer, and adhesive.

Experimental side: Etch-free adhesive applied directly per manufacturer instructions.

Bonding time for each side will be measured with a stopwatch.

Sample Size Justification Twenty patients will contribute approximately 212 bonded brackets (10-12 per side, excluding molars and second premolars). This sample size provides 80% power to detect a clinically meaningful difference in bond failure rates (expected 5% failure rate for the etch-free adhesive vs. 10% for conventional adhesive; α = 0.05), analyzed using McNemar's test for paired binary outcomes.

Outcome Measures Primary Outcome

Bracket Failure Rate: Number and location of dislodged brackets on test vs. control sides recorded at monthly visits.

Secondary Outcomes

Bonding Time: Measured in seconds per side.

Enamel Condition at Debonding: Assessed clinically and photographically by blinded evaluators.

Adhesive Remnant Index (ARI): Scored 0-3 after debonding.

White Spot Lesions (WSLs): Presence and severity assessed clinically and photographically at baseline and after 12 months using standardized scoring.

Patient-Reported Outcomes (if applicable): Discomfort related to bonding/debonding.

Data Collection and Management Data will be recorded using standardized forms and stored on secure, encrypted institutional servers.

Clinical photographs will document enamel condition and WSLs.

All data will be coded and de-identified. Only authorized study personnel will have access.

Ethical Considerations The study has been reviewed by the University of Maryland Institutional Review Board (IRB #HP-00115604) and determined to be minimal risk.

Written informed consent will be obtained from adult participants; minors will provide assent with parental consent.

Both adhesives are commercially available and widely used in clinical practice; no experimental drugs or devices are involved.

No additional radiographs or invasive procedures are required beyond standard care.

Participants may withdraw at any time without affecting their ongoing treatment.

This trial seeks to determine whether an etch-free adhesive can reduce enamel damage and improve bonding efficiency without compromising clinical performance.

Type d'étude

Interventionnel

Inscription (Estimé)

20

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Lieux d'étude

    • Maryland
      • Baltimore, Maryland, États-Unis, 21201
        • University of Maryland Baltimore School of Dentistry

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

14 ans à 35 ans (Enfant, Adulte)

Accepte les volontaires sains

Oui

Sexes éligibles pour l'étude

Tout

La description

Inclusion Criteria:

Patients aged 14 to 35 years

Requiring comprehensive fixed orthodontic treatment with brackets on both arches

Good general health with no contraindications to orthodontic treatment

Presence of at least 10 permanent teeth per arch suitable for bracket bonding

Ability and willingness to comply with study visits and follow-up for at least 12 months

Parent/guardian consent and child assent obtained as appropriate

Exclusion Criteria:

Presence of systemic diseases or conditions that affect oral health or healing (e.g., uncontrolled diabetes, immunosuppression)

Teeth with significant enamel defects, restorations, or caries in bonding areas

Patients currently undergoing or who have undergone orthodontic treatment previously

History of allergy or sensitivity to dental adhesives or related materials

Patients with poor oral hygiene or active periodontal disease

Use of medications known to affect tooth enamel or oral tissues (e.g., long-term corticosteroids)

Inability to attend follow-up visits or anticipated lack of compliance

Participation in another clinical trial that could interfere with study outcomes

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Traitement
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation croisée
  • Masquage: Seul

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: Etch-Free Adhesive

Teeth on one randomized side of the mouth will be bonded with a novel self-adhesive orthodontic material that does not require prior acid etching or primer application.

A self-adhesive orthodontic bonding material applied directly to enamel without prior phosphoric acid etching or primer application. Brackets are bonded following the manufacturer's instructions.

Expérimental: Conventional Etch-and-Bond Adhesive

Teeth on the contralateral side of the mouth will be bonded using the standard orthodontic bonding protocol with 35-37% phosphoric acid etching, primer, and conventional resin adhesive.

A standard orthodontic bonding protocol using 35-37% phosphoric acid etching, primer application, and a conventional light-cure adhesive. Brackets are bonded following the manufacturer's recommended procedure.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Bracket Failure Rate
Délai: Through study completion, up to 12 months post-bonding (evaluated at each routine orthodontic visit).

The proportion of brackets bonded with each adhesive (etch-free vs. conventional) that experience bond failure over a 12-month follow-up period. A bond failure is defined as a clinically detached bracket requiring rebonding.

Through study completion, up to 12 months post-bonding (evaluated at each routine orthodontic visit).

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Bonding Time Per Quadrant
Délai: At the initial bonding appointment (Day 1).

The time required to bond all brackets in one quadrant using either adhesive, measured in minutes using a digital timer.

At the initial bonding appointment (Day 1).
Adhesive Remnant Index (ARI) at Debonding
Délai: At debonding (approximately 12 months post-bonding or at completion of treatment).

The amount of adhesive remaining on the tooth surface after bracket removal, scored using the standardized Adhesive Remnant Index (0-3 scale).

At debonding (approximately 12 months post-bonding or at completion of treatment).
Enamel Surface Integrity
Délai: At debonding (approximately 12 months post-bonding).

Visual assessment of enamel for cracks, roughness, or damage after bracket removal, evaluated through clinical inspection and standardized digital photographs.

At debonding (approximately 12 months post-bonding).
White Spot Lesion (WSL) Formation
Délai: At baseline (Day 1), 6 months, and 12 months post-bonding.

Incidence and severity of new white spot lesions on bonded teeth, assessed using a standardized WSL index at 6 and 12 months.

At baseline (Day 1), 6 months, and 12 months post-bonding.

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

5 novembre 2025

Achèvement primaire (Estimé)

8 octobre 2027

Achèvement de l'étude (Estimé)

1 mars 2028

Dates d'inscription aux études

Première soumission

15 juillet 2025

Première soumission répondant aux critères de contrôle qualité

21 juillet 2025

Première publication (Réel)

29 juillet 2025

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

10 novembre 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

5 novembre 2026

Dernière vérification

1 novembre 2026

Plus d'information

Termes liés à cette étude

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

NON

Description du régime IPD

This study involves minimal-risk clinical data and will be reported in aggregate form only. De-identified individual participant data will not be shared outside the study team.

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Oui

produit fabriqué et exporté des États-Unis.

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner