이 페이지는 자동 번역되었으며 번역의 정확성을 보장하지 않습니다. 참조하십시오 영문판 원본 텍스트의 경우.

In Vitro Microstructural and Mechanical Analysis of Waste Material From Total Knee Arthroplasty for the Study of Innovative Solutions in the Treatment of Joint and Ligament Pathologies (TIB PLAT)

2026년 4월 30일 업데이트: Stefano Zaffagnini

In orthopedic surgical practice, there is an increasing incidence of degenerative joint diseases, due to the rising average age of the population, as well as ligament injuries resulting from the growing participation in sports activities. The knee joint, in particular, is the most affected by these conditions, which, given their heterogeneous nature, impact patients across a wide age range.

Knee pathologies, often interconnected (with a higher incidence of degenerative diseases following ligamentous and/or meniscal injuries), are particularly debilitating for patients and entail high costs for the national healthcare system, which are expected to increase over time.

Scientific efforts in the field of knee surgery are therefore focused on achieving an increasingly detailed understanding of pathological conditions, as well as on the development of innovative technologies to support surgical and clinical practice.

Carrying out such analyses and developing new technologies inevitably involves experimental laboratory studies of joint tissues. The study of waste material obtained from surgical procedures represents a fundamental resource in this context and has always been used safely, with no additional invasiveness for the patient. A vast amount of information derived from laboratory analyses of discarded tissue has contributed to improving clinical practice and has led to the development of solutions that are now part of routine surgical use.

Recent technologies allow increasingly accurate evaluation of both the structure and mechanical properties of discarded tissue explanted during surgery. For example, structural assessment using micro-CT enables visualization and analysis of the interface between bone tissue, ligamentous structures, and surgical implants with micrometric precision. This makes it possible to determine tissue density, orientation, and material quality, distinguishing between different boundary conditions and physiopathological states of the tissues. Such analyses can also be performed under conditions close to those characterizing the joint in vivo, both in terms of tissue immersed in fluid and with respect to mechanical loads applied to deform the tissue. Furthermore, it is possible to reconstruct the structural interaction between human tissue and external materials used in surgery, such as screws, plates, anchoring devices, etc.

These instruments therefore make it possible to surpass the level of detail achievable with conventional diagnostic and research equipment used over the years, and to investigate with increasing accuracy the onset and progression of a pathology, the condition of the involved tissues, and to predict functional recovery of the treated site following the application of anchoring devices in the operating room. These new analyses also enable the study of innovative solutions for tissue repair and reconstruction, such as patient-specific customized devices and/or new materials produced using 3D printing technology, without posing any risk to the patient during surgery.

연구 개요

상태

완전한

연구 유형

관찰

등록 (실제)

29

연락처 및 위치

이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.

연구 장소

      • Bologna, 이탈리아, 40136
        • IRCCS Rizzoli Ortopedic Institute

참여기준

연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.

자격 기준

공부할 수 있는 나이

  • 성인
  • 고령자

건강한 자원 봉사자를 받아들입니다

아니

샘플링 방법

비확률 샘플

연구 인구

Waste materials obtained from primary total knee arthroplasty procedures will be used. The collected material will mainly consist of osteochondral tissue from the patient's tibial plateau. This portion of tissue is routinely removed during the resection of the proximal (tibia) and distal (femur) bone components, which is necessary for the implantation of the prosthetic components. The resection and subsequent removal of the tibial plateau constitute a standard procedure and a mandatory step in primary total knee arthroplasty. This procedure will be performed intraoperatively by the medical staff of the coordinating investigator (Orthopaedic and Traumatology Clinic II). The waste material will be placed in a dedicated single-use container and transferred to the Research Center laboratories for analysis, in accordance with the above-mentioned internal procedure.

설명

Inclusion Criteria:

  • Total knee arthroplasty
  • Kellgren-Lawrence grade II, III, or IV osteoarthritis;
  • age < 85 years;
  • BMI < 35

Exclusion Criteria:

  • History/evidence of previous partial (unicompartmental) knee arthroplasty;
  • positivity for viral infections such as HIV, HBV, or HCV;
  • inability to provide informed consent.

공부 계획

이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.

연구는 어떻게 설계됩니까?

디자인 세부사항

연구는 무엇을 측정합니까?

주요 결과 측정

결과 측정
측정값 설명
기간
Microstructural properties of the explanted tissue
기간: At least 24 months
Porosity of the subchondral bone tissue
At least 24 months

2차 결과 측정

결과 측정
측정값 설명
기간
Load transfer mechanisms
기간: At least 24 months
Load transfer mechanisms from the residual cartilage tissue to the underlying bone tissue. Load transfer from the residual cartilage to the subchondral bone can be represented by the stress (Pa) developed in the underlying bone
At least 24 months
Bone/Tissue Density
기간: At least 24 months
Tissue density at the anterior cruciate ligament insertion will be quantified using micro-computed tomography and expressed as bone mineral density (mg HA/cm³).
At least 24 months
Structural Organization
기간: At least 24 months
Tissue orientation and homogeneity at the ligament insertion will be evaluated using histological and histomorphometric analysis and expressed using quantitative indices (e.g., orientation index, % area uniformity).
At least 24 months

공동 작업자 및 조사자

여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.

스폰서

연구 기록 날짜

이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.

연구 주요 날짜

연구 시작 (실제)

2021년 11월 30일

기본 완료 (실제)

2024년 3월 7일

연구 완료 (실제)

2025년 1월 7일

연구 등록 날짜

최초 제출

2026년 4월 21일

QC 기준을 충족하는 최초 제출

2026년 4월 30일

처음 게시됨 (실제)

2026년 5월 6일

연구 기록 업데이트

마지막 업데이트 게시됨 (실제)

2026년 5월 6일

QC 기준을 충족하는 마지막 업데이트 제출

2026년 4월 30일

마지막으로 확인됨

2026년 4월 1일

추가 정보

이 연구와 관련된 용어

추가 관련 MeSH 약관

기타 연구 ID 번호

  • TIB PLAT

약물 및 장치 정보, 연구 문서

미국 FDA 규제 의약품 연구

아니

미국 FDA 규제 기기 제품 연구

아니

이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .

구독하다