Tämä sivu käännettiin automaattisesti, eikä käännösten tarkkuutta voida taata. Katso englanninkielinen versio lähdetekstiä varten.

In Vitro Microstructural and Mechanical Analysis of Waste Material From Total Knee Arthroplasty for the Study of Innovative Solutions in the Treatment of Joint and Ligament Pathologies (TIB PLAT)

torstai 30. huhtikuuta 2026 päivittänyt: Stefano Zaffagnini

In orthopedic surgical practice, there is an increasing incidence of degenerative joint diseases, due to the rising average age of the population, as well as ligament injuries resulting from the growing participation in sports activities. The knee joint, in particular, is the most affected by these conditions, which, given their heterogeneous nature, impact patients across a wide age range.

Knee pathologies, often interconnected (with a higher incidence of degenerative diseases following ligamentous and/or meniscal injuries), are particularly debilitating for patients and entail high costs for the national healthcare system, which are expected to increase over time.

Scientific efforts in the field of knee surgery are therefore focused on achieving an increasingly detailed understanding of pathological conditions, as well as on the development of innovative technologies to support surgical and clinical practice.

Carrying out such analyses and developing new technologies inevitably involves experimental laboratory studies of joint tissues. The study of waste material obtained from surgical procedures represents a fundamental resource in this context and has always been used safely, with no additional invasiveness for the patient. A vast amount of information derived from laboratory analyses of discarded tissue has contributed to improving clinical practice and has led to the development of solutions that are now part of routine surgical use.

Recent technologies allow increasingly accurate evaluation of both the structure and mechanical properties of discarded tissue explanted during surgery. For example, structural assessment using micro-CT enables visualization and analysis of the interface between bone tissue, ligamentous structures, and surgical implants with micrometric precision. This makes it possible to determine tissue density, orientation, and material quality, distinguishing between different boundary conditions and physiopathological states of the tissues. Such analyses can also be performed under conditions close to those characterizing the joint in vivo, both in terms of tissue immersed in fluid and with respect to mechanical loads applied to deform the tissue. Furthermore, it is possible to reconstruct the structural interaction between human tissue and external materials used in surgery, such as screws, plates, anchoring devices, etc.

These instruments therefore make it possible to surpass the level of detail achievable with conventional diagnostic and research equipment used over the years, and to investigate with increasing accuracy the onset and progression of a pathology, the condition of the involved tissues, and to predict functional recovery of the treated site following the application of anchoring devices in the operating room. These new analyses also enable the study of innovative solutions for tissue repair and reconstruction, such as patient-specific customized devices and/or new materials produced using 3D printing technology, without posing any risk to the patient during surgery.

Tutkimuksen yleiskatsaus

Opintotyyppi

Havainnollistava

Ilmoittautuminen (Todellinen)

29

Yhteystiedot ja paikat

Tässä osiossa on tutkimuksen suorittajien yhteystiedot ja tiedot siitä, missä tämä tutkimus suoritetaan.

Opiskelupaikat

      • Bologna, Italia, 40136
        • IRCCS Rizzoli Ortopedic Institute

Osallistumiskriteerit

Tutkijat etsivät ihmisiä, jotka sopivat tiettyyn kuvaukseen, jota kutsutaan kelpoisuuskriteereiksi. Joitakin esimerkkejä näistä kriteereistä ovat henkilön yleinen terveydentila tai aiemmat hoidot.

Kelpoisuusvaatimukset

Opintokelpoiset iät

  • Aikuinen
  • Vanhempi Aikuinen

Hyväksyy terveitä vapaaehtoisia

Ei

Näytteenottomenetelmä

Ei-todennäköisyysnäyte

Tutkimusväestö

Waste materials obtained from primary total knee arthroplasty procedures will be used. The collected material will mainly consist of osteochondral tissue from the patient's tibial plateau. This portion of tissue is routinely removed during the resection of the proximal (tibia) and distal (femur) bone components, which is necessary for the implantation of the prosthetic components. The resection and subsequent removal of the tibial plateau constitute a standard procedure and a mandatory step in primary total knee arthroplasty. This procedure will be performed intraoperatively by the medical staff of the coordinating investigator (Orthopaedic and Traumatology Clinic II). The waste material will be placed in a dedicated single-use container and transferred to the Research Center laboratories for analysis, in accordance with the above-mentioned internal procedure.

Kuvaus

Inclusion Criteria:

  • Total knee arthroplasty
  • Kellgren-Lawrence grade II, III, or IV osteoarthritis;
  • age < 85 years;
  • BMI < 35

Exclusion Criteria:

  • History/evidence of previous partial (unicompartmental) knee arthroplasty;
  • positivity for viral infections such as HIV, HBV, or HCV;
  • inability to provide informed consent.

Opintosuunnitelma

Tässä osiossa on tietoja tutkimussuunnitelmasta, mukaan lukien kuinka tutkimus on suunniteltu ja mitä tutkimuksella mitataan.

Miten tutkimus on suunniteltu?

Suunnittelun yksityiskohdat

Mitä tutkimuksessa mitataan?

Ensisijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Microstructural properties of the explanted tissue
Aikaikkuna: At least 24 months
Porosity of the subchondral bone tissue
At least 24 months

Toissijaiset tulostoimenpiteet

Tulosmittaus
Toimenpiteen kuvaus
Aikaikkuna
Load transfer mechanisms
Aikaikkuna: At least 24 months
Load transfer mechanisms from the residual cartilage tissue to the underlying bone tissue. Load transfer from the residual cartilage to the subchondral bone can be represented by the stress (Pa) developed in the underlying bone
At least 24 months
Bone/Tissue Density
Aikaikkuna: At least 24 months
Tissue density at the anterior cruciate ligament insertion will be quantified using micro-computed tomography and expressed as bone mineral density (mg HA/cm³).
At least 24 months
Structural Organization
Aikaikkuna: At least 24 months
Tissue orientation and homogeneity at the ligament insertion will be evaluated using histological and histomorphometric analysis and expressed using quantitative indices (e.g., orientation index, % area uniformity).
At least 24 months

Yhteistyökumppanit ja tutkijat

Täältä löydät tähän tutkimukseen osallistuvat ihmiset ja organisaatiot.

Opintojen ennätyspäivät

Nämä päivämäärät seuraavat ClinicalTrials.gov-sivustolle lähetettyjen tutkimustietueiden ja yhteenvetojen edistymistä. National Library of Medicine (NLM) tarkistaa tutkimustiedot ja raportoidut tulokset varmistaakseen, että ne täyttävät tietyt laadunvalvontastandardit, ennen kuin ne julkaistaan ​​julkisella verkkosivustolla.

Opi tärkeimmät päivämäärät

Opiskelun aloitus (Todellinen)

Tiistai 30. marraskuuta 2021

Ensisijainen valmistuminen (Todellinen)

Torstai 7. maaliskuuta 2024

Opintojen valmistuminen (Todellinen)

Tiistai 7. tammikuuta 2025

Opintoihin ilmoittautumispäivät

Ensimmäinen lähetetty

Tiistai 21. huhtikuuta 2026

Ensimmäinen toimitettu, joka täytti QC-kriteerit

Torstai 30. huhtikuuta 2026

Ensimmäinen Lähetetty (Todellinen)

Keskiviikko 6. toukokuuta 2026

Tutkimustietojen päivitykset

Viimeisin päivitys julkaistu (Todellinen)

Keskiviikko 6. toukokuuta 2026

Viimeisin lähetetty päivitys, joka täytti QC-kriteerit

Torstai 30. huhtikuuta 2026

Viimeksi vahvistettu

Keskiviikko 1. huhtikuuta 2026

Lisää tietoa

Tähän tutkimukseen liittyvät termit

Muita asiaankuuluvia MeSH-ehtoja

Muut tutkimustunnusnumerot

  • TIB PLAT

Lääke- ja laitetiedot, tutkimusasiakirjat

Tutkii yhdysvaltalaista FDA sääntelemää lääkevalmistetta

Ei

Tutkii yhdysvaltalaista FDA sääntelemää laitetuotetta

Ei

Nämä tiedot haettiin suoraan verkkosivustolta clinicaltrials.gov ilman muutoksia. Jos sinulla on pyyntöjä muuttaa, poistaa tai päivittää tutkimustietojasi, ota yhteyttä register@clinicaltrials.gov. Heti kun muutos on otettu käyttöön osoitteessa clinicaltrials.gov, se päivitetään automaattisesti myös verkkosivustollemme .

Tilaa