此页面是自动翻译的,不保证翻译的准确性。请参阅 英文版 对于源文本。

Opsens Optowire for Fractional Flow Reserve - The O2 Pilot Study (O2)

2015年7月9日 更新者:Olivier F. Bertrand、Laval University
The purpose of this study is to assess the usability and safety of the Opsens OptoWire and Optomonitor in measuring fractional flow reserve (FFR) in patients with coronary artery disease who are undergoing a coronary angiogram.

研究概览

详细说明

Fractional flow reserve (FFR) measurement involves determining the ratio between the maximum achievable blood flow in a diseased coronary artery and the theoretical maximum flow in a normal coronary artery. An FFR of 1.0 is widely accepted as normal. An FFR value lower than 0.75 - 0.80 is generally considered to be associated with myocardial ischemia (MI).

FFR is easily measured during routine coronary angiography by using a pressure wire to calculate the ratio between coronary pressure distal to a coronary artery stenosis and aortic pressure under conditions of maximum myocardial hyperemia. This ratio represents the potential decrease in coronary flow distal to the coronary stenosis.

Over the past decade, FFR measurement has been increasingly used in cardiac catheterization laboratories. It provides a quantitative assessment of the functional severity of a coronary artery stenosis identified during coronary angiography and cardiac catheterization.

Opsens, Inc. has developed a new pressure wire for use in determining FFR in coronary arteries; the OptoWire. The OptoWire is an instrumented guide wire with a fiber optic pressure sensor mounted 3.5 cm proximal to the tip. The Optowire measures blood pressure during diagnostic and/or interventional procedures when used in combination with the OptoMonitor.

The O2 study is a pilot study which aims to provide preliminary experience in human patients with coronary artery disease. The study data will also be used as part of design validation.

The O2 study is a prospective single arm study designed to assess the usability, functionality, and safety of the Optowire and Optomonitor in patients.

研究类型

介入性

注册 (实际的)

60

阶段

  • 不适用

联系人和位置

本节提供了进行研究的人员的详细联系信息,以及有关进行该研究的地点的信息。

学习地点

      • Quebec、加拿大、G1V 4G5
        • IUCPQ - Laval Hospital

参与标准

研究人员寻找符合特定描述的人,称为资格标准。这些标准的一些例子是一个人的一般健康状况或先前的治疗。

资格标准

适合学习的年龄

18年 及以上 (成人、年长者)

接受健康志愿者

不

有资格学习的性别

全部

描述

Inclusion Criteria:

  • Patients with

    • Stable angina or,
    • Unstable angina pectoris or,
    • Atypical chest pain or no chest pain but with suspected ischemia
  • At least one moderate lesion in native coronary artery thought to produce ischemia
  • Operator and patient agree for procedures
  • Patient (> 18 years) has signed a written informed consent prior to procedure

Exclusion Criteria:

  • Lesions with angiographic 'haziness' or suspected to contain thrombus
  • Post-coronary artery bypass grafting
  • Total occlusion
  • If use of atherectomy device is indicated

学习计划

本节提供研究计划的详细信息,包括研究的设计方式和研究的衡量标准。

研究是如何设计的?

设计细节

  • 主要用途:诊断
  • 分配:不适用
  • 介入模型:单组作业
  • 屏蔽:无(打开标签)

武器和干预

参与者组/臂
干预/治疗
实验性的:Fractional flow reserve
Fractional flow reserve measurement
Fractional flow reserve measurement
其他名称:
  • Opsens Optowire and Optomonitor

研究衡量的是什么?

主要结果指标

结果测量
措施说明
大体时间
Safety and handling assessment of the Optowire
大体时间:Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
  1. Safely reach and cross a target lesion;
  2. perform an FFR measurement using the Optowire and Optomonitor according to the product user guide;
  3. disconnect the proximal connector on the OptoWire during the procedure, placing an interventional device (if necessary), and reconnecting the Optowire proximal connector;
  4. safely remove the Optowire from the coronary artery.

Dedicated questionnaires will be used for such assessment

Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

次要结果测量

结果测量
措施说明
大体时间
Comparison of FFR values measured with Optowire vs. with FFR guide wire used in standard practice
大体时间:Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
In selected cases, the operator may choose to perform FFR measurements using currently approved FFR wires. Values obtained with standard FFR wires and Optowire may therefore be compared.
Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

合作者和调查者

在这里您可以找到参与这项研究的人员和组织。

调查人员

  • 首席研究员:Olivier F Bertrand, MD PhD、International Chair on Interventional Cardiology and Transradial Approach

研究记录日期

这些日期跟踪向 ClinicalTrials.gov 提交研究记录和摘要结果的进度。研究记录和报告的结果由国家医学图书馆 (NLM) 审查,以确保它们在发布到公共网站之前符合特定的质量控制标准。

研究主要日期

学习开始

2014年5月1日

初级完成 (实际的)

2015年5月1日

研究完成 (实际的)

2015年5月1日

研究注册日期

首次提交

2014年5月15日

首先提交符合 QC 标准的

2014年5月16日

首次发布 (估计)

2014年5月21日

研究记录更新

最后更新发布 (估计)

2015年7月10日

上次提交的符合 QC 标准的更新

2015年7月9日

最后验证

2015年7月1日

更多信息

此信息直接从 clinicaltrials.gov 网站检索,没有任何更改。如果您有任何更改、删除或更新研究详细信息的请求,请联系 register@clinicaltrials.gov. clinicaltrials.gov 上实施更改,我们的网站上也会自动更新.

订阅