Denna sida har översatts automatiskt och översättningens korrekthet kan inte garanteras. Vänligen se engelsk version för en källtext.

Opsens Optowire for Fractional Flow Reserve - The O2 Pilot Study (O2)

9 juli 2015 uppdaterad av: Olivier F. Bertrand, Laval University
The purpose of this study is to assess the usability and safety of the Opsens OptoWire and Optomonitor in measuring fractional flow reserve (FFR) in patients with coronary artery disease who are undergoing a coronary angiogram.

Studieöversikt

Detaljerad beskrivning

Fractional flow reserve (FFR) measurement involves determining the ratio between the maximum achievable blood flow in a diseased coronary artery and the theoretical maximum flow in a normal coronary artery. An FFR of 1.0 is widely accepted as normal. An FFR value lower than 0.75 - 0.80 is generally considered to be associated with myocardial ischemia (MI).

FFR is easily measured during routine coronary angiography by using a pressure wire to calculate the ratio between coronary pressure distal to a coronary artery stenosis and aortic pressure under conditions of maximum myocardial hyperemia. This ratio represents the potential decrease in coronary flow distal to the coronary stenosis.

Over the past decade, FFR measurement has been increasingly used in cardiac catheterization laboratories. It provides a quantitative assessment of the functional severity of a coronary artery stenosis identified during coronary angiography and cardiac catheterization.

Opsens, Inc. has developed a new pressure wire for use in determining FFR in coronary arteries; the OptoWire. The OptoWire is an instrumented guide wire with a fiber optic pressure sensor mounted 3.5 cm proximal to the tip. The Optowire measures blood pressure during diagnostic and/or interventional procedures when used in combination with the OptoMonitor.

The O2 study is a pilot study which aims to provide preliminary experience in human patients with coronary artery disease. The study data will also be used as part of design validation.

The O2 study is a prospective single arm study designed to assess the usability, functionality, and safety of the Optowire and Optomonitor in patients.

Studietyp

Interventionell

Inskrivning (Faktisk)

60

Fas

  • Inte tillämpbar

Kontakter och platser

Det här avsnittet innehåller kontaktuppgifter för dem som genomför studien och information om var denna studie genomförs.

Studieorter

      • Quebec, Kanada, G1V 4G5
        • IUCPQ - Laval Hospital

Deltagandekriterier

Forskare letar efter personer som passar en viss beskrivning, så kallade behörighetskriterier. Några exempel på dessa kriterier är en persons allmänna hälsotillstånd eller tidigare behandlingar.

Urvalskriterier

Åldrar som är berättigade till studier

18 år och äldre (Vuxen, Äldre vuxen)

Tar emot friska volontärer

Nej

Kön som är behöriga för studier

Allt

Beskrivning

Inclusion Criteria:

  • Patients with

    • Stable angina or,
    • Unstable angina pectoris or,
    • Atypical chest pain or no chest pain but with suspected ischemia
  • At least one moderate lesion in native coronary artery thought to produce ischemia
  • Operator and patient agree for procedures
  • Patient (> 18 years) has signed a written informed consent prior to procedure

Exclusion Criteria:

  • Lesions with angiographic 'haziness' or suspected to contain thrombus
  • Post-coronary artery bypass grafting
  • Total occlusion
  • If use of atherectomy device is indicated

Studieplan

Det här avsnittet ger detaljer om studieplanen, inklusive hur studien är utformad och vad studien mäter.

Hur är studien utformad?

Designdetaljer

  • Primärt syfte: Diagnostisk
  • Tilldelning: N/A
  • Interventionsmodell: Enskild gruppuppgift
  • Maskning: Ingen (Open Label)

Vapen och interventioner

Deltagargrupp / Arm
Intervention / Behandling
Experimentell: Fractional flow reserve
Fractional flow reserve measurement
Fractional flow reserve measurement
Andra namn:
  • Opsens Optowire and Optomonitor

Vad mäter studien?

Primära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
Safety and handling assessment of the Optowire
Tidsram: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
  1. Safely reach and cross a target lesion;
  2. perform an FFR measurement using the Optowire and Optomonitor according to the product user guide;
  3. disconnect the proximal connector on the OptoWire during the procedure, placing an interventional device (if necessary), and reconnecting the Optowire proximal connector;
  4. safely remove the Optowire from the coronary artery.

Dedicated questionnaires will be used for such assessment

Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

Sekundära resultatmått

Resultatmått
Åtgärdsbeskrivning
Tidsram
Comparison of FFR values measured with Optowire vs. with FFR guide wire used in standard practice
Tidsram: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
In selected cases, the operator may choose to perform FFR measurements using currently approved FFR wires. Values obtained with standard FFR wires and Optowire may therefore be compared.
Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

Samarbetspartners och utredare

Det är här du hittar personer och organisationer som är involverade i denna studie.

Utredare

  • Huvudutredare: Olivier F Bertrand, MD PhD, International Chair on Interventional Cardiology and Transradial Approach

Studieavstämningsdatum

Dessa datum spårar framstegen för inlämningar av studieposter och sammanfattande resultat till ClinicalTrials.gov. Studieposter och rapporterade resultat granskas av National Library of Medicine (NLM) för att säkerställa att de uppfyller specifika kvalitetskontrollstandarder innan de publiceras på den offentliga webbplatsen.

Studera stora datum

Studiestart

1 maj 2014

Primärt slutförande (Faktisk)

1 maj 2015

Avslutad studie (Faktisk)

1 maj 2015

Studieregistreringsdatum

Först inskickad

15 maj 2014

Först inskickad som uppfyllde QC-kriterierna

16 maj 2014

Första postat (Uppskatta)

21 maj 2014

Uppdateringar av studier

Senaste uppdatering publicerad (Uppskatta)

10 juli 2015

Senaste inskickade uppdateringen som uppfyllde QC-kriterierna

9 juli 2015

Senast verifierad

1 juli 2015

Mer information

Denna information hämtades direkt från webbplatsen clinicaltrials.gov utan några ändringar. Om du har några önskemål om att ändra, ta bort eller uppdatera dina studieuppgifter, vänligen kontakta register@clinicaltrials.gov. Så snart en ändring har implementerats på clinicaltrials.gov, kommer denna att uppdateras automatiskt även på vår webbplats .

Prenumerera