Ta strona została przetłumaczona automatycznie i dokładność tłumaczenia nie jest gwarantowana. Proszę odnieść się do angielska wersja za tekst źródłowy.

Opsens Optowire for Fractional Flow Reserve - The O2 Pilot Study (O2)

9 lipca 2015 zaktualizowane przez: Olivier F. Bertrand, Laval University
The purpose of this study is to assess the usability and safety of the Opsens OptoWire and Optomonitor in measuring fractional flow reserve (FFR) in patients with coronary artery disease who are undergoing a coronary angiogram.

Przegląd badań

Szczegółowy opis

Fractional flow reserve (FFR) measurement involves determining the ratio between the maximum achievable blood flow in a diseased coronary artery and the theoretical maximum flow in a normal coronary artery. An FFR of 1.0 is widely accepted as normal. An FFR value lower than 0.75 - 0.80 is generally considered to be associated with myocardial ischemia (MI).

FFR is easily measured during routine coronary angiography by using a pressure wire to calculate the ratio between coronary pressure distal to a coronary artery stenosis and aortic pressure under conditions of maximum myocardial hyperemia. This ratio represents the potential decrease in coronary flow distal to the coronary stenosis.

Over the past decade, FFR measurement has been increasingly used in cardiac catheterization laboratories. It provides a quantitative assessment of the functional severity of a coronary artery stenosis identified during coronary angiography and cardiac catheterization.

Opsens, Inc. has developed a new pressure wire for use in determining FFR in coronary arteries; the OptoWire. The OptoWire is an instrumented guide wire with a fiber optic pressure sensor mounted 3.5 cm proximal to the tip. The Optowire measures blood pressure during diagnostic and/or interventional procedures when used in combination with the OptoMonitor.

The O2 study is a pilot study which aims to provide preliminary experience in human patients with coronary artery disease. The study data will also be used as part of design validation.

The O2 study is a prospective single arm study designed to assess the usability, functionality, and safety of the Optowire and Optomonitor in patients.

Typ studiów

Interwencyjne

Zapisy (Rzeczywisty)

60

Faza

  • Nie dotyczy

Kontakty i lokalizacje

Ta sekcja zawiera dane kontaktowe osób prowadzących badanie oraz informacje o tym, gdzie badanie jest przeprowadzane.

Lokalizacje studiów

      • Quebec, Kanada, G1V 4G5
        • IUCPQ - Laval Hospital

Kryteria uczestnictwa

Badacze szukają osób, które pasują do określonego opisu, zwanego kryteriami kwalifikacyjnymi. Niektóre przykłady tych kryteriów to ogólny stan zdrowia danej osoby lub wcześniejsze leczenie.

Kryteria kwalifikacji

Wiek uprawniający do nauki

18 lat i starsze (Dorosły, Starszy dorosły)

Akceptuje zdrowych ochotników

Nie

Płeć kwalifikująca się do nauki

Wszystko

Opis

Inclusion Criteria:

  • Patients with

    • Stable angina or,
    • Unstable angina pectoris or,
    • Atypical chest pain or no chest pain but with suspected ischemia
  • At least one moderate lesion in native coronary artery thought to produce ischemia
  • Operator and patient agree for procedures
  • Patient (> 18 years) has signed a written informed consent prior to procedure

Exclusion Criteria:

  • Lesions with angiographic 'haziness' or suspected to contain thrombus
  • Post-coronary artery bypass grafting
  • Total occlusion
  • If use of atherectomy device is indicated

Plan studiów

Ta sekcja zawiera szczegółowe informacje na temat planu badania, w tym sposób zaprojektowania badania i jego pomiary.

Jak projektuje się badanie?

Szczegóły projektu

  • Główny cel: Diagnostyczny
  • Przydział: Nie dotyczy
  • Model interwencyjny: Zadanie dla jednej grupy
  • Maskowanie: Brak (otwarta etykieta)

Broń i interwencje

Grupa uczestników / Arm
Interwencja / Leczenie
Eksperymentalny: Fractional flow reserve
Fractional flow reserve measurement
Fractional flow reserve measurement
Inne nazwy:
  • Opsens Optowire and Optomonitor

Co mierzy badanie?

Podstawowe miary wyniku

Miara wyniku
Opis środka
Ramy czasowe
Safety and handling assessment of the Optowire
Ramy czasowe: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
  1. Safely reach and cross a target lesion;
  2. perform an FFR measurement using the Optowire and Optomonitor according to the product user guide;
  3. disconnect the proximal connector on the OptoWire during the procedure, placing an interventional device (if necessary), and reconnecting the Optowire proximal connector;
  4. safely remove the Optowire from the coronary artery.

Dedicated questionnaires will be used for such assessment

Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

Miary wyników drugorzędnych

Miara wyniku
Opis środka
Ramy czasowe
Comparison of FFR values measured with Optowire vs. with FFR guide wire used in standard practice
Ramy czasowe: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
In selected cases, the operator may choose to perform FFR measurements using currently approved FFR wires. Values obtained with standard FFR wires and Optowire may therefore be compared.
Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

Współpracownicy i badacze

Tutaj znajdziesz osoby i organizacje zaangażowane w to badanie.

Śledczy

  • Główny śledczy: Olivier F Bertrand, MD PhD, International Chair on Interventional Cardiology and Transradial Approach

Daty zapisu na studia

Daty te śledzą postęp w przesyłaniu rekordów badań i podsumowań wyników do ClinicalTrials.gov. Zapisy badań i zgłoszone wyniki są przeglądane przez National Library of Medicine (NLM), aby upewnić się, że spełniają określone standardy kontroli jakości, zanim zostaną opublikowane na publicznej stronie internetowej.

Główne daty studiów

Rozpoczęcie studiów

1 maja 2014

Zakończenie podstawowe (Rzeczywisty)

1 maja 2015

Ukończenie studiów (Rzeczywisty)

1 maja 2015

Daty rejestracji na studia

Pierwszy przesłany

15 maja 2014

Pierwszy przesłany, który spełnia kryteria kontroli jakości

16 maja 2014

Pierwszy wysłany (Oszacować)

21 maja 2014

Aktualizacje rekordów badań

Ostatnia wysłana aktualizacja (Oszacować)

10 lipca 2015

Ostatnia przesłana aktualizacja, która spełniała kryteria kontroli jakości

9 lipca 2015

Ostatnia weryfikacja

1 lipca 2015

Więcej informacji

Te informacje zostały pobrane bezpośrednio ze strony internetowej clinicaltrials.gov bez żadnych zmian. Jeśli chcesz zmienić, usunąć lub zaktualizować dane swojego badania, skontaktuj się z register@clinicaltrials.gov. Gdy tylko zmiana zostanie wprowadzona na stronie clinicaltrials.gov, zostanie ona automatycznie zaktualizowana również na naszej stronie internetowej .

Subskrybuj