Эта страница была переведена автоматически, точность перевода не гарантируется. Пожалуйста, обратитесь к английской версии для исходного текста.

Opsens Optowire for Fractional Flow Reserve - The O2 Pilot Study (O2)

9 июля 2015 г. обновлено: Olivier F. Bertrand, Laval University
The purpose of this study is to assess the usability and safety of the Opsens OptoWire and Optomonitor in measuring fractional flow reserve (FFR) in patients with coronary artery disease who are undergoing a coronary angiogram.

Обзор исследования

Подробное описание

Fractional flow reserve (FFR) measurement involves determining the ratio between the maximum achievable blood flow in a diseased coronary artery and the theoretical maximum flow in a normal coronary artery. An FFR of 1.0 is widely accepted as normal. An FFR value lower than 0.75 - 0.80 is generally considered to be associated with myocardial ischemia (MI).

FFR is easily measured during routine coronary angiography by using a pressure wire to calculate the ratio between coronary pressure distal to a coronary artery stenosis and aortic pressure under conditions of maximum myocardial hyperemia. This ratio represents the potential decrease in coronary flow distal to the coronary stenosis.

Over the past decade, FFR measurement has been increasingly used in cardiac catheterization laboratories. It provides a quantitative assessment of the functional severity of a coronary artery stenosis identified during coronary angiography and cardiac catheterization.

Opsens, Inc. has developed a new pressure wire for use in determining FFR in coronary arteries; the OptoWire. The OptoWire is an instrumented guide wire with a fiber optic pressure sensor mounted 3.5 cm proximal to the tip. The Optowire measures blood pressure during diagnostic and/or interventional procedures when used in combination with the OptoMonitor.

The O2 study is a pilot study which aims to provide preliminary experience in human patients with coronary artery disease. The study data will also be used as part of design validation.

The O2 study is a prospective single arm study designed to assess the usability, functionality, and safety of the Optowire and Optomonitor in patients.

Тип исследования

Интервенционный

Регистрация (Действительный)

60

Фаза

  • Непригодный

Контакты и местонахождение

В этом разделе приведены контактные данные лиц, проводящих исследование, и информация о том, где проводится это исследование.

Места учебы

      • Quebec, Канада, G1V 4G5
        • IUCPQ - Laval Hospital

Критерии участия

Исследователи ищут людей, которые соответствуют определенному описанию, называемому критериям приемлемости. Некоторыми примерами этих критериев являются общее состояние здоровья человека или предшествующее лечение.

Критерии приемлемости

Возраст, подходящий для обучения

18 лет и старше (Взрослый, Пожилой взрослый)

Принимает здоровых добровольцев

Нет

Полы, имеющие право на обучение

Все

Описание

Inclusion Criteria:

  • Patients with

    • Stable angina or,
    • Unstable angina pectoris or,
    • Atypical chest pain or no chest pain but with suspected ischemia
  • At least one moderate lesion in native coronary artery thought to produce ischemia
  • Operator and patient agree for procedures
  • Patient (> 18 years) has signed a written informed consent prior to procedure

Exclusion Criteria:

  • Lesions with angiographic 'haziness' or suspected to contain thrombus
  • Post-coronary artery bypass grafting
  • Total occlusion
  • If use of atherectomy device is indicated

Учебный план

В этом разделе представлена ​​подробная информация о плане исследования, в том числе о том, как планируется исследование и что оно измеряет.

Как устроено исследование?

Детали дизайна

  • Основная цель: Диагностика
  • Распределение: Н/Д
  • Интервенционная модель: Одногрупповое задание
  • Маскировка: Нет (открытая этикетка)

Оружие и интервенции

Группа участников / Армия
Вмешательство/лечение
Экспериментальный: Fractional flow reserve
Fractional flow reserve measurement
Fractional flow reserve measurement
Другие имена:
  • Opsens Optowire and Optomonitor

Что измеряет исследование?

Первичные показатели результатов

Мера результата
Мера Описание
Временное ограничение
Safety and handling assessment of the Optowire
Временное ограничение: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
  1. Safely reach and cross a target lesion;
  2. perform an FFR measurement using the Optowire and Optomonitor according to the product user guide;
  3. disconnect the proximal connector on the OptoWire during the procedure, placing an interventional device (if necessary), and reconnecting the Optowire proximal connector;
  4. safely remove the Optowire from the coronary artery.

Dedicated questionnaires will be used for such assessment

Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

Вторичные показатели результатов

Мера результата
Мера Описание
Временное ограничение
Comparison of FFR values measured with Optowire vs. with FFR guide wire used in standard practice
Временное ограничение: Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)
In selected cases, the operator may choose to perform FFR measurements using currently approved FFR wires. Values obtained with standard FFR wires and Optowire may therefore be compared.
Patients will be followed through removal of the OptoWire from percutaneous insertion site and completion of the cardiac catheterization procedure (expected average <1hr)

Соавторы и исследователи

Здесь вы найдете людей и организации, участвующие в этом исследовании.

Спонсор

Следователи

  • Главный следователь: Olivier F Bertrand, MD PhD, International Chair on Interventional Cardiology and Transradial Approach

Даты записи исследования

Эти даты отслеживают ход отправки отчетов об исследованиях и сводных результатов на сайт ClinicalTrials.gov. Записи исследований и сообщаемые результаты проверяются Национальной медицинской библиотекой (NLM), чтобы убедиться, что они соответствуют определенным стандартам контроля качества, прежде чем публиковать их на общедоступном веб-сайте.

Изучение основных дат

Начало исследования

1 мая 2014 г.

Первичное завершение (Действительный)

1 мая 2015 г.

Завершение исследования (Действительный)

1 мая 2015 г.

Даты регистрации исследования

Первый отправленный

15 мая 2014 г.

Впервые представлено, что соответствует критериям контроля качества

16 мая 2014 г.

Первый опубликованный (Оценивать)

21 мая 2014 г.

Обновления учебных записей

Последнее опубликованное обновление (Оценивать)

10 июля 2015 г.

Последнее отправленное обновление, отвечающее критериям контроля качества

9 июля 2015 г.

Последняя проверка

1 июля 2015 г.

Дополнительная информация

Эта информация была получена непосредственно с веб-сайта clinicaltrials.gov без каких-либо изменений. Если у вас есть запросы на изменение, удаление или обновление сведений об исследовании, обращайтесь по адресу register@clinicaltrials.gov. Как только изменение будет реализовано на clinicaltrials.gov, оно будет автоматически обновлено и на нашем веб-сайте. .

Подписаться