Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Self-Cure vs. Highly Filled Flowable Composite in Carious Cervical Lesions: 18-Month RCT

2 juillet 2026 mis à jour par: Abdelrahman Hamza Halim Hamza, Cairo University

Clinical Performance of a Self-Cure Composite System Versus a Highly Filled Flowable Composite System in Carious Cervical Lesions: A Randomized 18 Months Clinical Trial

The aim of the study is to compare and evaluate the clinical performance of a self cure composite system versus a highly filled flowable composite in the restoration of carious cervical lesions over an 18 months follow up period.

Aperçu de l'étude

Statut

Pas encore de recrutement

Les conditions

Description détaillée

Examination and selection of patients will be done according to the inclusion and exclusion criteria. A class V cavity will be prepared after local anesthesia has been given. Followed by the placement of the restorative material according to the randomization sequence.

For the intervention: the primer will be applied first followed by filling of the cavity using self cure composite (Stella Automix or Stela Capsule, SDI Ltd, Australia). For the control group: etching of the cavity (Kulzer Gluma Etch, Kulzer GmbH, Germany) will be done followed by rinsing, drying, applying the bonding agent (Solobond M, Voco GmbH, Germany), curing, and lastly, applying the highly filled flowable composite (Polofil NHT flow, Voco Gmbh, Germany) and curing.

Type d'étude

Interventionnel

Inscription (Estimé)

50

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Coordonnées de l'étude

Lieux d'étude

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

  • Adulte

Accepte les volontaires sains

Non

La description

Patient-related Criteria:

A) Inclusion Criteria:

  • Patients consulting in the outpatient clinic with cervical carious lesion.
  • Age between 21-45 years.
  • Males and females.

B) Exclusion Criteria:

  • Systemic disease or severe medical complication.
  • Allergy to any of the restorative materials.
  • Pregnancy.
  • Disabilities.
  • Heavy smoking; xerostomia.
  • Lack of compliance.
  • Evidence of severe bruxism, clenching, or temporomandibular joint disorders or bizarre habits.

Tooth-related Criteria:

A) Inclusion Criteria:

  • Small to moderate class V carious lesion.
  • Teeth are vital with no signs of irreversible pulpitis.
  • Caries cervical margins above the CEJ.
  • Well-formed and fully erupted in normal functional occlusion with natural antagonist.

B) Exclusion Criteria:

  • Deciduous teeth; as the study is targeting only permanent teeth.
  • Deep carious defects (close to the pulp, less than 1 mm distance).
  • Tooth hypersensitivity.
  • Teeth with previous restorations, which may add another variable to the study (type of old restorative material, extent of recurrent caries).
  • Heavy occlusion and occlusal contacts or history of bruxism.
  • Endodontically treated teeth.
  • Periapical pathology or signs of pulpal pathology.

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Traitement
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation parallèle
  • Masquage: Double

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: Self-cure Bulk Fill Resin Composite (Stela Automix or Stela Capsule, SDI Limited, Australia)
A class V cavity with 1 mm occlusal bevel will be prepared after administrating local anesthesia followed by rubber dam isolation. Stela Primer (SDI Limited, Australia.) will be applied for 5 seconds on the cavity and the margins, then it will be gently dried with air for 2-3 seconds without light curing. The self-cure bulk fill resin composite (Stela Automix or Stela Capsule, SDI Limited, Australia) will be applied then sculpted using a gold-plated composite applicator (Lascod, Italy). Full polymerization will take place after 4 minutes.
Comparateur actif: Highly Filled Flowable Composite (Polofil NHT flow, Voco GmbH, Germany)
A class V cavity with 1 mm occlusal bevel will be prepared after administering local anesthesia. Rubber dam isolation will be done, , etching of the enamel (20-30 seconds) and dentin (15 seconds) using a 35% phosphoric acid etch (Kulzer Gluma Etch, Kulzer GmbH, Germany), then rinsing for 20 seconds followed by controlled drying of the cavity till it's slightly moist. Application of the bonding agent (Solobond M, Voco GmbH, Germany) using a disposable brush and leaving it to act for 30 seconds then an air jet will be used to disperse the bonding agent. Curing for 20 seconds will be done using a LED light curing unit with curing intensity 1200-3000 mw/cm2 (CuringPen-E, Changzhou Sifary Medical Technology Co., Ltd, China). Flowable composite (Polofil NHT flow, Voco GmbH, Germany) will be placed, adapted by gold plated applicator then light polymerized for 20 seconds using light emitting diode (LED) light curing unit.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Retention
Délai: 18 Months
The restoration will be clinically assessed according to the modified USPHS criteria. Restoration will be given Alpha score when there is no loss of restoration. It will be given a Charlie score when there is loss of restoration and need for replacement.
18 Months

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Marginal Adaptation
Délai: 18 months
The restoration will be clinically assessed according to the modified USPHS criteria. It will be give an Alpha score when the restoration is closely adapted with no detectable margin. It will be given a Bravo score when there is a detectable marginal discrepancy, but it still clinically acceptable. It will be given a Charlie score when there is a marginal crevice that is clinically unacceptable.
18 months
Marginal Discoloration
Délai: 18 months
The restoration will be clinically assessed according to the modified USPHS criteria. It will be given an Alpha score when there is no discoloration between the tooth and the restoration. It will be given a Bravo score when there is superficial discoloration which can be polished away. It will be give a Charlie score when the discoloration has penetrated beyond the margin in pulpal direction.
18 months
Post-operative Sensitivity
Délai: 18 months
The restoration will be clinically assessed according to the modified USPHS criteria. It will be give an Alpha score when there is no post-operative sensitivity and a Charlie score when there is post-operative sensitivity.
18 months
Recurrent Caries
Délai: 18 months
The restoration will be clinically assessed according to the modified USPHS criteria. It will be given an Alpha score when there is no detectable recurrent caries and a Charlie score when recurrent caries is detected.
18 months
Surface Roughness
Délai: 18 months
The restoration will be clinically assessed according to the modified USPHS criteria. It will be given an Alpha score when there is no surface defect. It will be given a bravo score when there is minimal surface defect. It will be given a charlie score when there is a severe surface defect.
18 months
Color Match
Délai: 18 months
The restoration will be clinically assessed according to the modified USPHS criteria. It will be given an Alpha score when the restoration matches the color of the tooth. It will be give a Bravo score when there is an acceptable mismatch. It will be given a Charlie score when there is an unacceptable mismatch.
18 months

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Parrainer

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Estimé)

1 septembre 2026

Achèvement primaire (Estimé)

1 février 2027

Achèvement de l'étude (Estimé)

1 avril 2027

Dates d'inscription aux études

Première soumission

1 mai 2026

Première soumission répondant aux critères de contrôle qualité

1 mai 2026

Première publication (Réel)

8 mai 2026

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

6 juillet 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

2 juillet 2026

Dernière vérification

1 juillet 2026

Plus d'information

Termes liés à cette étude

Autres numéros d'identification d'étude

  • Self-cure Bulk fill Resin

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

INDÉCIS

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner