Validation of a Method to Measure Soft Tissue Thickness Using Near Infrared Laser Light
Validierung Der Bestimmung Der Gewebedicke Mit Hilfe Von Licht im Infrarotbereich
The study is intended to verify a newly developed method to measure the thickness of cranial soft tissue. In the study, a high-resolution MRI scan is used as ground truth for a laser scan of the forehead. The laser scan is acquired point by point with a prototype scanning unit developed at the University of Luebeck's Institute for Robotics.
The measured tissue thickness using the near-infrared scanning approach is validated against the ground truth obtained by the MRI scan. The average accuracy of the reconstruction method is then computed over all subjects from the individual study arms.
The required laser intensity and exposure time as well as the achieved measurement accuracy is evaluated with respect to the different skin types of the test subjects. Correlation between these features and the skin type according to the Fitzpatrick scale will be computed.
For 1/3 of the subjects, the laser and MRI scans are repeated after 2 and 8 weeks. The results of the scans are compared and time dependency is analysed.
Studieoversikt
Status
Forhold
Intervensjon / Behandling
Studietype
Registrering (Forventet)
Fase
- Ikke aktuelt
Kontakter og plasseringer
Studiesteder
-
-
Schleswig-Holstein
-
Lübeck, Schleswig-Holstein, Tyskland, 23562
- Aktiv, ikke rekrutterende
- Clinic for Maxillofacial Surgery of the University Hospital Schleswig-Holstein
-
Lübeck, Schleswig-Holstein, Tyskland, 23562
- Rekruttering
- University of Luebeck, Institute for Robotics
-
Ta kontakt med:
- Floris Ernst, PhD
- Telefonnummer: +494515005208
- E-post: ernst@rob.uni-luebeck.de
-
Hovedetterforsker:
- Floris Ernst, PhD
-
-
Deltakelseskriterier
Kvalifikasjonskriterier
Alder som er kvalifisert for studier
Tar imot friske frivillige
Kjønn som er kvalifisert for studier
Beskrivelse
Inclusion Criteria:
- male and female adults
- variations in skin type (at least 10 subjects with skin types I & II, at least 2 subjects with skin type III, at least 3 subjects with skin type IV, at least 3 subjects with skin types V & VI)
- optional: availability of high-resolution CT or CBCT (cone-beam CT) scan of the forehead
Exclusion Criteria:
- allergies or intolerances against ABS (acrylonitrile butadiene styrene), PMMA (polymethyl methacrylate) or alginate
- elevated light sensitivity of the skin
- exclusion criteria for MRI (claustrophobia, motoric disorders, tattoos, body piercings, metallic implants in the skull, epilepsy, cardiac pacemakers)
Studieplan
Hvordan er studiet utformet?
Designdetaljer
- Primært formål: Grunnvitenskap
- Tildeling: Ikke-randomisert
- Intervensjonsmodell: Enkeltgruppeoppdrag
- Masking: Ingen (Open Label)
Våpen og intervensjoner
Deltakergruppe / Arm |
Intervensjon / Behandling |
|---|---|
|
Eksperimentell: Skin types I and II
Volunteers classified as skin types I and II according to the Fitzpatrick Scale Procedures: dental cast creation, MRI scan, laser scan |
Acquisition of a high-resolution MRI scan (0.15 x 0.15 x 1.0 mm³) aligned with the AC-PC (anterior commissure-posterior commissure) line
A near-infrared laser scan of the subject's forehead is acquired
A dental cast made of PMMA (polymethyl methacrylate) of the subject's maxilla is created
|
|
Eksperimentell: Skin type III
Volunteers classified as skin type III according to the Fitzpatrick Scale Procedures: dental cast creation, MRI scan, laser scan |
Acquisition of a high-resolution MRI scan (0.15 x 0.15 x 1.0 mm³) aligned with the AC-PC (anterior commissure-posterior commissure) line
A near-infrared laser scan of the subject's forehead is acquired
A dental cast made of PMMA (polymethyl methacrylate) of the subject's maxilla is created
|
|
Eksperimentell: Skin type IV
Volunteers classified as skin type IV according to the Fitzpatrick Scale Procedures: dental cast creation, MRI scan, laser scan |
Acquisition of a high-resolution MRI scan (0.15 x 0.15 x 1.0 mm³) aligned with the AC-PC (anterior commissure-posterior commissure) line
A near-infrared laser scan of the subject's forehead is acquired
A dental cast made of PMMA (polymethyl methacrylate) of the subject's maxilla is created
|
|
Eksperimentell: Skin types V and VI
Volunteers classified as skin types V and VI according to the Fitzpatrick Scale Procedures: dental cast creation, MRI scan, laser scan |
Acquisition of a high-resolution MRI scan (0.15 x 0.15 x 1.0 mm³) aligned with the AC-PC (anterior commissure-posterior commissure) line
A near-infrared laser scan of the subject's forehead is acquired
A dental cast made of PMMA (polymethyl methacrylate) of the subject's maxilla is created
|
Hva måler studien?
Primære resultatmål
Resultatmål |
Tidsramme |
|---|---|
|
Average accuracy of tissue thickness measurement method [mm]
Tidsramme: up to 6 months
|
up to 6 months
|
Sekundære resultatmål
Resultatmål |
Tiltaksbeskrivelse |
Tidsramme |
|---|---|---|
|
System dependency on skin color - required intensity
Tidsramme: up to 6 months
|
Correlation between skin types (according to the Fitzpatrick scale) and the outcome (required laser intensity [mW])
|
up to 6 months
|
|
Long-term stability of measured features - accuracy
Tidsramme: up to 8 months
|
Change in measurement accuracy [mm]
|
up to 8 months
|
|
Long-term stability of measured features - required intensity
Tidsramme: up to 8 months
|
Change in required laser intensity [mW]
|
up to 8 months
|
|
Long-term stability of measured features - required exposure time
Tidsramme: up to 8 months
|
Change in required exposure time [ms]
|
up to 8 months
|
|
System dependency on skin color - accuracy
Tidsramme: up to 6 months
|
Correlation between skin types (according to the Fitzpatrick scale) and the outcome (accuracy of tissue thickness measurement [mm])
|
up to 6 months
|
|
System dependency on skin color - exposure time
Tidsramme: up to 6 months
|
Correlation between skin types (according to the Fitzpatrick scale) and the outcome (required exposure time [ms])
|
up to 6 months
|
Samarbeidspartnere og etterforskere
Sponsor
Etterforskere
- Hovedetterforsker: Floris Ernst, PhD, University of Luebeck
Publikasjoner og nyttige lenker
Hjelpsomme linker
Studierekorddatoer
Studer hoveddatoer
Studiestart
Primær fullføring (Forventet)
Studiet fullført (Forventet)
Datoer for studieregistrering
Først innsendt
Først innsendt som oppfylte QC-kriteriene
Først lagt ut (Anslag)
Oppdateringer av studieposter
Sist oppdatering lagt ut (Anslag)
Siste oppdatering sendt inn som oppfylte QC-kriteriene
Sist bekreftet
Mer informasjon
Begreper knyttet til denne studien
Nøkkelord
Andre studie-ID-numre
- ROB-NIRMR-001
Denne informasjonen ble hentet direkte fra nettstedet clinicaltrials.gov uten noen endringer. Hvis du har noen forespørsler om å endre, fjerne eller oppdatere studiedetaljene dine, vennligst kontakt register@clinicaltrials.gov. Så snart en endring er implementert på clinicaltrials.gov, vil denne også bli oppdatert automatisk på nettstedet vårt. .