Effectiveness of Tubular Coaxial Nickel-titanium and Copper Nickel-titanium Orthodontic Aligning Archwires

May 10, 2023 updated by: Reyam Mohammed Noori, University of Baghdad

Effectiveness of Tubular Coaxial Nickel-titanium and Copper Nickel-titanium Orthodontic Aligning Archwires: A Randomized Clinical Trial

This study will be done to compare the effectiveness of using coaxial tubular superelastic nickel-titanium and copper-nickel-titanium archwires during the initial phase of orthodontic treatment regarding alignment efficiency, pain perception, and root resorption.

Study Overview

Status

Completed

Conditions

Intervention / Treatment

Detailed Description

This will be a prospective blinded non-stratified randomized clinical trial , parallel group trial with equal randomization (1:1 allocation ratio), different private clinics and general hospitals will allocate patients for this trial. The patients will be initially assessed for eligibility to be included in the study by the investigator. Those who will meet the inclusion criteria will be informed about the nature of the study verbally to take the initial approval for participation. The patients were asked to read the patient information sheet carefully at home and inform the investigator about their decision of participation at the subsequent appointment and to sign consent form sheet in case of agreement.

The patients will be treated using MBT prescription brackets with 0.022-inch slot (Pinnacle®, Ortho Technology, USA). Initially, teeth polishing will be performed with pumice and rubber cup, followed by water rinsing and air drying

All the participants will receive the same treatment. At the day of bonding, the first archwire will be placed for each group. Eight weeks later it will be replaced by the next size archwire for another eight weeks. Archwires will be tied to the bracket using elastomeric ligatures. Any debonding during treatment should be considered an emergency and re-bonded within 24 hours, otherwise the case will be dropout. A good alginate impression for the lower arch should be taken pre-treatment and after 4, 8, 12 and 16 weeks and a stone study model is obtained. Periapical X-ray for the mandibular central incisors will be taken pre-treatment and after 16 weeks. The participants will be given visual analog scale to record their pain p during the first week after each archwire placement.

Study Type

Interventional

Enrollment (Actual)

33

Phase

  • Not Applicable

Contacts and Locations

This section provides the contact details for those conducting the study, and information on where this study is being conducted.

Study Locations

  • Iraq
      • Baghdad, Iraq, 10047
        • Baghdad college of dentistry

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Ages Eligible for Study

  • Child
  • Adult
  • Older Adult

Accepts Healthy Volunteers

Yes

Description

Inclusion Criteria:

  1. Patients indicated for fixed appliance orthodontic treatment with 5-9 mm crowding of mandibular anterior teeth according to Little's irregularity index (LII).
  2. Presence of all the mandibular permanent teeth, except the third molars.
  3. Overbite and overjet that do not interfere with bracket placement on mandibular anterior teeth.
  4. No history of trauma or root resorption in the mandibular incisors.

Exclusion Criteria:

  1. Previous orthodontic treatment.
  2. Less than 5 mm of mandibular incisors crowding (LII).
  3. Severe crowding which requires treatment by extraction of premolars in the mandibular arch.
  4. Blocked-out teeth that cannot be engaged with the aligning archwire.
  5. Prior experience of periodontal disease and loss of attachment.

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: Treatment
  • Allocation: Randomized
  • Interventional Model: Parallel Assignment
  • Masking: Triple

Arms and Interventions

Participant Group / Arm
Intervention / Treatment
Experimental: Coaxial tubular superelastic nickel-titanium Group (TuNT)
0.016-inch coaxial tubular superelastic nickel-titanium archwire (TuNT) (Speed tubular supercable, Speed System™ Orthodontics, Ontario, Canada) will be placed in mandibular arch at the day of bonding. Eight weeks later it will be replaced by the 0.018-inch archwire for another eight weeks
Other: aligning archwires
At the day of bonding, 0.016-inch archwire will be placed for the TuNT group. Eight weeks later it will be replaced by the 0.018-inch archwire for another eight weeks. While, for the CuNT group, 0.014-inch archwire will be placed at the day of bonding and eight weeks later it will be replaced by the 0.018-inch archwire for another eight weeks. Archwires will be tied to the bracket by elastomeric modules which will be changed every 4 weeks. A good-quality alginate impression for the lower arch should be taken pre-treatment and after 4, 8, 12 and 16 weeks and a stone study model is obtained. Periapical X-ray for the mandibular central incisors will be taken pre-treatment and after 16 weeks. The participants will be provided by a visual analog scale (0-10) to record their pain perception during the first week after each wire placement.
Experimental: Copper-nickel-titanium Group (CuNT)
0.014-inch Copper-nickel-titanium archwire (CuNT) (Damon Optimal-Force Copper Ni-Ti®, Ormco, Glendora, Calif) will be placed in mandibular arch at the day of bonding. Eight weeks later it will be replaced by the 0.018-inch archwire for another eight weeks.
Other: aligning archwires
At the day of bonding, 0.016-inch archwire will be placed for the TuNT group. Eight weeks later it will be replaced by the 0.018-inch archwire for another eight weeks. While, for the CuNT group, 0.014-inch archwire will be placed at the day of bonding and eight weeks later it will be replaced by the 0.018-inch archwire for another eight weeks. Archwires will be tied to the bracket by elastomeric modules which will be changed every 4 weeks. A good-quality alginate impression for the lower arch should be taken pre-treatment and after 4, 8, 12 and 16 weeks and a stone study model is obtained. Periapical X-ray for the mandibular central incisors will be taken pre-treatment and after 16 weeks. The participants will be provided by a visual analog scale (0-10) to record their pain perception during the first week after each wire placement.

What is the study measuring?

Primary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Changes in alignment of anterior teeth will be measured using Little's irregularity index
Time Frame: 16 weeks
A good-quality alginate impression for the lower arch should be taken pre-treatment and after 4, 8, 12 and 16 weeks and a stone study model is obtained. This study model which should be free from any discrepancy (such as bubbles) will be used to measure Little's irregularity index using a digital Vernier caliper to calculate the amount of mesial and distal contact displacement from the mesial contact surface of right mandibular canine to that on the other side, to the nearest 0.01 mm. The sum of these measurements represents the amount of Little's irregularity index.
16 weeks

Secondary Outcome Measures

Outcome Measure
Measure Description
Time Frame
Root resorption using the scoring index that was provided by Malmgren et al. (1982)
Time Frame: 16 weeks

Root resorption will be evaluated for the mandibular central incisors using periapical radiographs with digital sensors, and the worst score for either left or right central will be taken using the scoring index by Malmgren et al. (1982):

  • Grade 1: Irregular apical root contour.
  • Grade 2: Minor apical root resorption, a small area of root loss amounting to less than 2 mm.
  • Grade 3: Severe apical root resorption from 2 mm to one third of the original root length.
  • Grade 4: Extreme apical root resorption exceeding one third of the original root length.
16 weeks
pain perception using visual analog scale
Time Frame: 1st week after each wire placement.
Evaluations of pain/discomfort will be made in the evening on a daily basis over the first seven days after bonding using a 10-point visual analog scale (VAS) with 0 refers to "no pain" and 10 refers to "intolerable pain". The participants will be reminded daily by a phone call or a text message to mark the recording sheet and will be asked to bring it on their next appointment.
1st week after each wire placement.

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

University of Baghdad

Investigators

  • Study Director: Yassir A. Yassir, M.Sc., P.hd. (UK), University of Baghdad

Publications and helpful links

The person responsible for entering information about the study voluntarily provides these publications. These may be about anything related to the study.

General Publications

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start (Actual)

February 28, 2022

Primary Completion (Actual)

October 15, 2022

Study Completion (Actual)

October 15, 2022

Study Registration Dates

First Submitted

May 16, 2022

First Submitted That Met QC Criteria

May 20, 2022

First Posted (Actual)

May 26, 2022

Study Record Updates

Last Update Posted (Estimate)

May 11, 2023

Last Update Submitted That Met QC Criteria

May 10, 2023

Last Verified

May 1, 2023

More Information

Terms related to this study

Other Study ID Numbers

  • 599422

Plan for Individual participant data (IPD)

Plan to Share Individual Participant Data (IPD)?

NO

Drug and device information, study documents

Studies a U.S. FDA-regulated drug product

No

Studies a U.S. FDA-regulated device product

No

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Subscribe