Clinical Evaluation of 3D-Printed Versus Semi-Direct Composite Resin Restorations
연구 개요
상태
상태
정황
정황
개입 / 치료
개입 / 치료
상세 설명
Dental restorations are commonly used to restore teeth affected by caries or structural defects. Advances in digital dentistry have introduced three-dimensional (3D) printing technologies that enable the fabrication of indirect composite resin restorations with improved precision, efficiency, and reproducibility. Semi-direct composite resin restorations represent another conservative restorative approach that combines the advantages of direct and indirect techniques while reducing polymerization shrinkage and improving anatomical form.
Although both techniques are increasingly used in clinical practice, evidence regarding their long-term clinical performance remains limited. Therefore, this randomized controlled clinical trial aims to compare the clinical performance of 3D-printed composite resin restorations and semi-direct composite resin restorations in posterior teeth requiring Class II inlay or onlay restorations.
Sixty patients aged 25 to 40 years who require two Class II inlay or onlay restorations will be enrolled by invitation from patients attending the Faculty of Dentistry, Tanta University. Participants will be randomly allocated into two groups according to the restorative material and fabrication technique used. Group I will receive 3D-printed composite resin restorations, while Group II will receive semi-direct composite resin restorations.
All cavity preparations and restorative procedures will be performed according to standardized clinical protocols and manufacturers' instructions. Clinical evaluations will be conducted at baseline, 6 months, 9 months, and 12 months after restoration placement using the modified FDI World Dental Federation criteria.
The primary objective is to evaluate the overall clinical performance and survival of the restorations over a 12-month follow-up period. Secondary outcomes include assessment of retention, marginal integrity, surface roughness, anatomical form, postoperative sensitivity, and the occurrence of secondary caries.
The findings of this study will contribute to the evidence regarding the effectiveness and clinical reliability of 3D-printed composite resin restorations compared with semi-direct composite resin restorations and may support clinical decision-making in restorative dentistry.
연구 유형
연구 유형
등록 (추정된)
등록
단계
단계
- 해당 없음
연락처 및 위치
연구 장소
-
-
Tanta
-
Tanta, Tanta, 이집트, 31527
- Restorative Department, Faculty of Dentistry, Tanta University
-
-
참여기준
자격 기준
자격 기준
공부할 수 있는 나이
- 성인
건강한 자원 봉사자를 받아들입니다
설명
Inclusion Criteria:
- Patients aged 25-40 years.
- Patients requiring two Class II inlay or onlay restorations.
- Teeth with carious lesions or defective restorations requiring indirect restorative treatment.
- Teeth with sufficient structure to receive an inlay/onlay restoration.
Exclusion Criteria:
- Patients with systemic diseases or medical conditions that may affect oral health or healing.
- Pregnant or lactating patients.
- Patients with poor oral hygiene or uncontrolled periodontal disease.
공부 계획
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 치료
- 할당: 무작위
- 중재 모델: 병렬 할당
- 마스킹: 더블
팔의 수
무기와 개입
참가자 그룹 / 팔참가자 그룹 / 팔 |
개입 / 치료개입 / 치료 |
|---|---|
|
실험적: 3D-Printed Composite Resin Restorations
Participants will receive Class II inlay or onlay restorations fabricated using 3D-printed composite resin.
Restorations will be placed following standardized cavity preparation and manufacturer instructions.
Clinical performance will be evaluated at baseline, 6, 9, and 12 months using modified FDI criteria
|
Fabrication and placement of Class II inlay or onlay restorations using 3D-printed composite resin material.
|
|
실험적: Semi-Direct Composite Resin Restorations
Participants will receive Class II inlay or onlay restorations fabricated using the semi-direct composite resin technique.
Restorations will be placed following standardized cavity preparation and manufacturer instructions.
Clinical performance will be evaluated at baseline, 6, 9, and 12 months using modified FDI criteria
|
Fabrication and placement of Class II inlay or onlay restorations using the semi-direct composite resin technique
|
연구는 무엇을 측정합니까?
주요 결과 측정
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Fracture of restorations
기간: 12 months
|
Clinical evaluation of restoration fracture or bulk failure after placement of 3D-printed composite resin and semi-direct composite resin restorations.
at baseline, 6 months, 9 months, and 12 months after restoration placement.
using a modified FDI criteria score.
All restorations will be evaluated and categorized based on their clinical performance according to the assigned criteria: score 1 indicates a clinically excellent restoration, scores 2 and 3 represent clinically acceptable restorations, while scores 4 and 5 are considered clinically unacceptable.
Clinical success will be defined as restorations receiving scores of 1, 2, or 3, whereas scores of 4 or 5 will be considered clinical failures.
|
12 months
|
공동 작업자 및 조사자
간행물 및 유용한 링크
일반 간행물
- Nguyen-Thi TL, Tran TM, Tran-Thi HP, Nguyen-Ho PM, Do TT, Dang MH. Effect of preparation design on the fracture behavior of 3D-printed restorations in an in-vitro tooth wear model. BMC Oral Health. 2026 Mar 12;26(1):704. doi: 10.1186/s12903-026-08031-0.
- Tribst JPM, Veerman A, Pereira GKR, Kleverlaan CJ, Dal Piva AMO. Comparative Strength Study of Indirect Permanent Restorations: 3D-Printed, Milled, and Conventional Dental Composites. Clin Pract. 2024 Sep 20;14(5):1940-1952. doi: 10.3390/clinpract14050154.
- Kaffaf MB, Sesen P, Tokac SO. Comparison of the intaglio surface accuracy of occlusal veneers fabricated using two different techniques to restore severe occlusal tooth wear: An in vitro study. J Prosthet Dent. 2026 Jun;135(6):e97-e105. doi: 10.1016/j.prosdent.2025.12.027. Epub 2026 Jan 6.
- Peskersoy C, Acar G. In Vitro Evaluation of the Mechanical Properties of Posterior Adhesive Restorations Fabricated Using Three Different Techniques. Polymers (Basel). 2025 May 14;17(10):1340. doi: 10.3390/polym17101340.
연구 기록 날짜
연구 주요 날짜
연구 시작 (실제)
연구 시작
기본 완료 (추정된)
기본 완료
연구 완료 (추정된)
연구 완료
연구 등록 날짜
최초 제출
최초 제출
QC 기준을 충족하는 최초 제출
QC 기준을 충족하는 최초 제출
처음 게시됨 (실제)
처음 게시됨
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
마지막 업데이트 게시됨
QC 기준을 충족하는 마지막 업데이트 제출
QC 기준을 충족하는 마지막 업데이트 제출
마지막으로 확인됨
마지막으로 확인됨
추가 정보
이 연구와 관련된 용어
기타 연구 ID 번호
기타 연구 ID 번호
- 3D-Printed Composite
개별 참가자 데이터(IPD) 계획
개별 참가자 데이터(IPD)를 공유할 계획입니까?
약물 및 장치 정보, 연구 문서
미국 FDA 규제 의약품 연구
미국 FDA 규제 기기 제품 연구
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .