Tato stránka byla automaticky přeložena a přesnost překladu není zaručena. Podívejte se prosím na anglická verze pro zdrojový text.

Mikrobiologické hodnocení účinnosti různých protokolů dekontaminace povrchu zubních implantátů

28. září 2026 aktualizováno: Igor Smojver, University of Zagreb

Mikrobiologické hodnocení účinnosti různých protokolů dekontaminace povrchu pro zubní implantáty pomocí metody polymerázové řetězové reakce

The purpose of this prospective clinical study is to evaluate and compare the effectiveness of different cleaning (decontamination) methods for dental implants affected by peri-implantitis. Peri-implantitis is an inflammatory condition caused by a bacterial biofilm on the implant surface, which can lead to bone loss and implant failure if left untreated. Because the rough surface and threads of implants make them difficult to clean, finding the most effective decontamination method is critical for saving the implant.

This study will include 90 healthy, non-smoking participants who have a bone-level dental implant affected by peri-implantitis without vertical bone loss. Participants will be randomly assigned to one of three treatment groups (30 implants per group) to undergo a specific decontamination procedure during their surgical treatment:

Group 1 (Laser PDT): Decontamination using photodynamic therapy with a blue laser and riboflavin, followed by a sterile saline rinse.

Group 2 (GalvoSurge): Decontamination using an electrolytic cleaning device, followed by a sterile saline rinse.

Group 3 (Active Control): Decontamination using a 0.2% chlorhexidine gluconate rinse, which is the current standard of care.

To measure the effectiveness of these treatments, researchers will take sterile swabs from the implant surface immediately before and after the decontamination process. These swabs will be analyzed using PCR to detect changes in the microbiological load of five specific bacteria known to cause gum and implant disease (Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia, Treponema denticola, and Tannerella forsythia).

Following the decontamination and swabbing, all participants will receive a standard Guided Bone Regeneration (GBR) procedure using autogenous bone, a xenograft, and a collagen membrane to help rebuild the bone around the implant.

By comparing the microbiological results before and after treatment, the study aims to determine whether the newer methods (Laser PDT or electrolytic cleaning) are more effective at removing harmful bacteria than the traditional chlorhexidine rinse prior to bone regeneration.

Přehled studie

Postavení

Nábor

Podmínky

Intervence / Léčba

Detailní popis

Background and Rationale Contemporary dental implantology represents a reliable and predictable treatment method for partial or complete tooth loss. However, despite high success rates, complications such as peri-implantitis can lead to implant loss, significantly impacting patients functionally, emotionally, and financially. Peri-implantitis is an inflammatory condition affecting the soft and hard tissues surrounding an osseointegrated dental implant, with a prevalence of approximately 20% among patients undergoing implant therapy.

The primary etiological factor for peri-implantitis is the formation of a bacterial biofilm on the exposed surface of the implant. Biofilm formation is a complex, multi-step process involving the colonization of bacteria from around the implants, natural teeth, and other areas of the oral cavity. The oral biofilm associated with peri-implantitis is characterized by high microbial diversity. While no single specific bacterium has been identified as exclusively present in peri-implantitis biofilms, the long-term presence of this biofilm stimulates a host immune response, leading to chronic inflammation and subsequent tissue destruction.

The Clinical Challenge One of the most demanding and critical tasks in the treatment of peri-implantitis is the complete removal of the biofilm and the prevention of its recurrence. The presence of deep peri-implant pockets, restricted access to all implant surfaces, and the inherently rough, threaded topography of dental implants make mechanical and chemical decontamination exceptionally challenging.

Traditionally, mechanical tools such as curettes, sonic and ultrasonic instruments, air-polishing devices, and rotating titanium or chitosan brushes have been utilized to remove hard and soft deposits. A key clinical requirement is to achieve this with minimal damage or alteration to the implant surface. To address this, chemical agents (e.g., sterile saline, hydrogen peroxide, citric acid, EDTA, phosphoric acid, and chlorhexidine gluconate) are often employed alongside mechanical methods.

Recently, novel modalities have emerged to minimize surface damage while maximizing antimicrobial efficacy:

Antimicrobial Photodynamic Therapy (aPDT): Based on a photochemical reaction between a photosensitizer, oxygen, and a specific light wavelength, this therapy generates reactive oxygen species that induce bacterial cell death.

Electrolytic Cleaning (GalvoSurge): This method utilizes an electrolytic process to actively lift and eliminate bacterial biofilms from rough titanium surfaces, demonstrating promising in vitro results.

Study Objectives This prospective clinical trial is designed to evaluate and compare the antimicrobial efficacy of two novel implant decontamination protocols-Laser PDT and Electrolytic Cleaning (GalvoSurge)-against the widely accepted gold standard of 0.2% chlorhexidine gluconate rinsing. The primary focus is assessing the reduction of the microbiological load on the implant surface immediately following decontamination and prior to regenerative bone surgery.

Methodology and Clinical Protocol The study will be conducted at the School of Dental Medicine, University of Zagreb, within the Department of Oral Surgery. All surgical procedures will be performed by the same specialist in oral surgery to ensure procedural consistency.

The trial will enroll 90 bone-level dental implants affected by peri-implantitis but deemed viable for retention in the dental arch. Implants with vertical bone loss are excluded from this study. Eligible participants are restricted to healthy, non-smoking individuals classified as ASA I or II, with no systemic comorbidities. Pre-operative assessment will include Cone Beam Computed Tomography (CBCT) imaging.

The clinical workflow for each implant is as follows:

Flap Elevation: A mucoperiosteal flap is raised to expose the contaminated implant surface.

Baseline Sampling (Sample 1): A sterile swab is taken directly from the implant surface for initial PCR analysis to establish the baseline microbiological load.

Randomization and Intervention: Implants are randomly assigned to one of three treatment arms (n=30 per arm):

Group 1: Decontamination using Laser PDT (riboflavin photosensitizer + blue laser) followed by a sterile saline rinse.

Group 2: Decontamination using the GalvoSurge electrolytic system followed by a sterile saline rinse.

Group 3 (Active Control): Decontamination using a 0.2% chlorhexidine gluconate rinse.

Post-Treatment Sampling (Sample 2): Immediately following the decontamination protocol, a second sterile swab is taken for PCR analysis.

Regenerative Procedure: The surgery concludes with a classic Guided Bone Regeneration (GBR) procedure, utilizing autologous bone particles, a xenograft, and a collagen membrane fixed in place with titanium pins.

Microbiological Analysis

Samples will be analyzed using a validated real-time Polymerase Chain Reaction (RT-PCR) method targeting five specific periodontopathogenic bacteria:

Aggregatibacter actinomycetemcomitans

Porphyromonas gingivalis

Prevotella intermedia

Treponema denticola

Tannerella forsythia

The primary outcome is the change in the microbiological load. Results will be expressed as a semi-quantitative score (-, +, ++, +++), which will be numerically coded for statistical evaluation. The change is calculated as the difference between the post-treatment and pre-treatment values for each specific implant.

Sample Size and Statistical Analysis Plan The study is designed as a prospective comparative trial with repeated measures. Sample size estimations were based on available in vitro studies demonstrating a large effect size for electrolytic decontamination compared to standard methods.

Power Calculation: Assuming a conservative large standardized effect size (Cohen's d ≈ 0.9), a two-sided significance level of α = 0.05, and a test power of 80%, a minimum of 25 implants per group is required to detect statistically significant differences between the test groups and the control group. To account for potential sample loss or unusable swabs, the enrollment target was increased to 30 implants per group (90 implants total).

Data Analysis: Statistical significance is set at 95% (p < 0.05). Normal distribution of the data will be assessed descriptively and via formal tests.

For normally distributed data, a one-way Analysis of Variance (ANOVA) will be utilized, followed by post-hoc comparisons of each test group against the control group.

If assumptions for parametric testing are not met, appropriate non-parametric alternatives will be applied.

Differences between baseline and post-treatment values within individual groups will be analyzed using tests for dependent samples.

Qualitative outcomes (e.g., the positive or negative presence of the target pathogens) will be evaluated using categorical data methodologies.

Hypothesis: Based on preliminary in vitro findings, the investigators anticipate a more pronounced therapeutic and antimicrobial effect in the GalvoSurge electrolytic cleaning group compared to the control.

Typ studie

Intervenční

Zápis (Odhadovaný)

90

Fáze

  • Nelze použít

Kontakty a umístění

Tato část poskytuje kontaktní údaje pro ty, kteří studii provádějí, a informace o tom, kde se tato studie provádí.

Studijní kontakt

  • Jméno: Igor Smojver, DMD;PhD
  • Telefonní číslo: 385981651932
  • E-mail: ismojver@sfzg.hr

Studijní místa

      • Zagreb, Chorvatsko, 10000
        • Nábor
        • School of Dental Medicine
        • Kontakt:
          • Igor Smojver, DMD,PhD
          • Telefonní číslo: +385981651932
          • E-mail: ismojver@sfzg.hr

Kritéria účasti

Výzkumníci hledají lidi, kteří odpovídají určitému popisu, kterému se říká kritéria způsobilosti. Některé příklady těchto kritérií jsou celkový zdravotní stav osoby nebo předchozí léčba.

Kritéria způsobilosti

Věk způsobilý ke studiu

  • Dítě
  • Dospělý
  • Starší dospělý

Přijímá zdravé dobrovolníky

Ne

Pohlaví způsobilá ke studiu

Všechno

Popis

Inclusion Criteria:

  • Systemically healthy patients classified as ASA I (no systemic comorbidities).
  • Patients who are non-smokers.
  • Clinical diagnosis of peri-implantitis on a single dental implant per patient.
  • Implant morphology classified as Monje Class Ia (buccal dehiscence with <1mm horizontal bone loss) or Monje Class Ib (2-to-3-wall infrabony defect).
  • Dental implants of either "bone-level" or "tissue-level" design , featuring an exclusively SLA (Sandblasted, Large-grit, Acid-etched) surface in the subcrestal area requiring decontamination.
  • Implants deemed viable with a favorable perspective for long-term preservation in the dental arch.

Exclusion Criteria :

  • Patients with any systemic comorbidities or those not classified as ASA I.
  • Patients who are currently smokers.
  • Presence of more than one implant affected by peri-implantitis in the same patient.
  • Implants featuring any surface morphology other than SLA (e.g., machined, hydroxyapatite-coated) in the treated subcrestal area.
  • Bone defect morphology that does not correspond to Monje Class Ia or Ib (e.g., severe horizontal or vertical bone loss outside these parameters).
  • Implants with a poor prognosis where extraction is indicated.

Studijní plán

Tato část poskytuje podrobnosti o studijním plánu, včetně toho, jak je studie navržena a co studie měří.

Jak je studie koncipována?

Detaily designu

  • Primární účel: Léčba
  • Přidělení: Randomizované
  • Intervenční model: Paralelní přiřazení
  • Maskování: Žádné (otevřený štítek)

Zbraně a zásahy

Skupina účastníků / Arm
Intervence / Léčba
Experimentální: Laser PDT + Saline Rinse

Implants in this group will undergo surface decontamination using Photodynamic Therapy (PDT). This involves the application of a riboflavin photosensitizer activated by a blue laser, followed by a rinse with sterile normal saline solution. The decontamination is performed immediately after the baseline microbiological swab (Sample 1) and before the post-treatment swab (Sample 2). All implants will subsequently receive a standard Guided Bone Regeneration (GBR) procedure.

Interventions:

Device / Procedure: Laser Photodynamic Therapy (PDT)

Procedure: Guided Bone Regeneration (GBR)

Antimicrobial photodynamic therapy applied to the contaminated implant surface. This involves the application of a riboflavin photosensitizer which is then activated by a blue laser to generate reactive oxygen species and eliminate bacterial biofilm. The procedure is concluded with a sterile normal saline rinse.

Arm Group(s): Laser PDT + Saline Rinse

A classic surgical bone grafting procedure performed on all implants immediately following their assigned decontamination protocol. The procedure involves placing a mixture of autologous bone particles and a xenograft around the implant, which is then covered by a collagen membrane fixed in place using titanium pins.

Arm Group(s): Laser PDT + Saline Rinse; GalvoSurge + Saline Rinse; Chlorhexidine Rinse (Control)

Experimentální: GalvoSurge + Saline Rinse

Implants in this group will undergo surface decontamination using the GalvoSurge electrolytic cleaning system, followed by a rinse with sterile normal saline solution. The decontamination is performed immediately after the baseline microbiological swab (Sample 1) and before the post-treatment swab (Sample 2). All implants will subsequently receive a standard Guided Bone Regeneration (GBR) procedure.

Interventions:

Device / Procedure: GalvoSurge Electrolytic Cleaning

Procedure: Guided Bone Regeneration (GBR)

A classic surgical bone grafting procedure performed on all implants immediately following their assigned decontamination protocol. The procedure involves placing a mixture of autologous bone particles and a xenograft around the implant, which is then covered by a collagen membrane fixed in place using titanium pins.

Arm Group(s): Laser PDT + Saline Rinse; GalvoSurge + Saline Rinse; Chlorhexidine Rinse (Control)

Decontamination of the implant surface using the GalvoSurge dental device. This system utilizes an electrolytic process with a specific cleaning solution to actively lift and detach the bacterial biofilm from the rough titanium surface. The procedure is concluded with a sterile normal saline rinse.

Arm Group(s): GalvoSurge + Saline Rinse

Aktivní komparátor: Chlorhexidine Rinse (Control)

Implants in this control group will undergo surface decontamination using the current clinical gold standard, which is a 0.2% chlorhexidine gluconate rinse. The decontamination is performed immediately after the baseline microbiological swab (Sample 1) and before the post-treatment swab (Sample 2). All implants will subsequently receive a standard Guided Bone Regeneration (GBR) procedure.

Interventions:

Drug / Procedure: 0.2% Chlorhexidine Gluconate Rinse

Procedure: Guided Bone Regeneration (GBR)

A classic surgical bone grafting procedure performed on all implants immediately following their assigned decontamination protocol. The procedure involves placing a mixture of autologous bone particles and a xenograft around the implant, which is then covered by a collagen membrane fixed in place using titanium pins.

Arm Group(s): Laser PDT + Saline Rinse; GalvoSurge + Saline Rinse; Chlorhexidine Rinse (Control)

Chemical decontamination of the implant surface by rinsing it thoroughly with a 0.2% chlorhexidine gluconate solution, which serves as the active control/gold standard for antimicrobial reduction.

Arm Group(s): Chlorhexidine Rinse (Control)

Co je měření studie?

Primární výstupní opatření

Měření výsledku
Popis opatření
Časové okno
Change in Microbiological Load of Periodontopathogenic Bacteria
Časové okno: Intraoperatively: Measured immediately before the decontamination procedure (baseline) and immediately after the completion of the decontamination procedure (prior to bone regeneration).

The primary outcome evaluates the effectiveness of the decontamination protocols by measuring the change in the bacterial load on the implant surface. Sterile swabs taken before and after the intervention are analyzed using a validated real-time Polymerase Chain Reaction (RT-PCR) method to detect five specific periodontopathogenic bacteria (Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia, Treponema denticola, and Tannerella forsythia). The microbiological load is expressed as a semi-quantitative score (-, +, ++, +++), which is then numerically coded for statistical analysis. The primary measure is the calculated difference (change) between the post-treatment and baseline pre-treatment scores for each individual implant.

Intraoperatively: Measured immediately before the decontamination procedure (baseline) and immediately after the completion of the decontamination procedure (prior to bone regeneration).

Spolupracovníci a vyšetřovatelé

Zde najdete lidi a organizace zapojené do této studie.

Sponzor

Publikace a užitečné odkazy

Osoba odpovědná za zadávání informací o studiu tyto publikace poskytuje dobrovolně. Mohou se týkat čehokoli, co souvisí se studiem.

Obecné publikace

Termíny studijních záznamů

Tato data sledují průběh záznamů studie a předkládání souhrnných výsledků na ClinicalTrials.gov. Záznamy ze studií a hlášené výsledky jsou před zveřejněním na veřejné webové stránce přezkoumány Národní lékařskou knihovnou (NLM), aby se ujistily, že splňují specifické standardy kontroly kvality.

Hlavní termíny studia

Začátek studia (Aktuální)

1. března 2026

Primární dokončení (Odhadovaný)

1. března 2027

Dokončení studie (Odhadovaný)

1. června 2027

Termíny zápisu do studia

První předloženo

7. dubna 2026

První předloženo, které splnilo kritéria kontroly kvality

7. dubna 2026

První zveřejněno (Aktuální)

14. dubna 2026

Aktualizace studijních záznamů

Poslední zveřejněná aktualizace (Aktuální)

2. října 2026

Odeslaná poslední aktualizace, která splnila kritéria kontroly kvality

28. září 2026

Naposledy ověřeno

1. září 2026

Více informací

Termíny související s touto studií

Další identifikační čísla studie

  • 123456789

Plán pro data jednotlivých účastníků (IPD)

Plánujete sdílet data jednotlivých účastníků (IPD)?

NE

Informace o lécích a zařízeních, studijní dokumenty

Studuje lékový produkt regulovaný americkým FDA

Ne

Studuje produkt zařízení regulovaný americkým úřadem FDA

Ne

Tyto informace byly beze změn načteny přímo z webu clinicaltrials.gov. Máte-li jakékoli požadavky na změnu, odstranění nebo aktualizaci podrobností studie, kontaktujte prosím register@clinicaltrials.gov. Jakmile bude změna implementována na clinicaltrials.gov, bude automaticky aktualizována i na našem webu .