Effect of Staining and Bleaching on Color stability and Surface Roughness of Three Resin Composites: An in vitro study
Abha Telang, Indiresha H Narayana, K S Madhu, Dinesh Kalasaiah, Poornima Ramesh, Shruthi Nagaraja, Abha Telang, Indiresha H Narayana, K S Madhu, Dinesh Kalasaiah, Poornima Ramesh, Shruthi Nagaraja
Abstract
Aim: This study evaluated the effect of staining and subsequent bleaching on the color stability and surface roughness of three resin composites.
Materials and methods: One hundred and eight customized plastic disks from a plastic mold with an outer diameter of 10 mm and thickness of 1.02 mm were fabricated. Samples were divided into three groups of 36 specimens each - Group I (Estelite® α - Supranano), Group II (Filtek™ Z250 XT - Nanohybrid), and Group III (Filtek™ P90-Silorane). Subsequently, baseline surface color and roughness values were tabulated using spectrophotometer and profilometer, respectively. The specimens were then subjected to staining with coffee and turmeric for a period of 3 h/day for 40 days and following this, bleaching of the samples was done using a bleaching agent carbamide peroxide gel 15% for 8 h/day for 14 consecutive days.
Results: Estelite® α performed better by maintaining color stability with minimal roughness compared to Filtek™ P90 and Filtek™Z250 XT. Turmeric had a greater potential to stain composites compared to coffee in all the groups.
Keywords: Color stability; Supranano; nanohybrid; silorane; surface roughness.
Conflict of interest statement
There are no conflicts of interest.
Figures
References
- Hervás-García A, Martínez-Lozano MA, Cabanes-Vila J, Barjau-Escribano A, Fos-Galve P. Composite resins. A review of the materials and clinical indications. Med Oral Patol Oral Cir Bucal. 2006;11:E215–20.
- Yap AU, Sau CW, Lye KW. Effects of finishing/polishing time on surface characteristics of tooth-coloured restoratives. J Oral Rehabil. 1998;25:456–61.
- Goldstein RE, Garber DA, Schwartz CG, Goldstein CE. Patient maintenance of esthetic restorations. J Am Dent Assoc. 1992;123:61–7.
- Lee SY, Huang HM, Lin CY, Shih YH. Leached components from dental composites in oral simulating fluids and the resultant composite strengths. J Oral Rehabil. 1998;25:575–88.
- Abu-Bakr N, Han L, Okamoto A, Iwaku M. Color stability of compomer after immersion in various media. J Esthet Dent. 2000;12:258–63.
- Musanje L, Ferracane JL, Ferracane LL. Effects of resin formulation and nanofiller surface treatment on in vitro wear of experimental hybrid resin composite. J Biomed Mater Res B Appl Biomater. 2006;77:120–5.
- Joshi P, Chitinis R. Silorane composite system. Sci J. 2008;2:1–5.
- Lien W, Vandewalle KS. Physical properties of a new silorane-based restorative system. Dent Mater. 2010;26:337–44.
- Cooley RL, Burger KM. Effect of carbamide peroxide on composite resins. Quintessence Int. 1991;22:817–21.
- Bailey SJ, Swift EJ., Jr Effects of home bleaching products on composite resins. Quintessence Int. 1992;23:489–94.
- Canay S, Cehreli MC. The effect of current bleaching agents on the color of light-polymerized composites in vitro . J Prosthet Dent. 2003;89:474–8.
- Kim JH, Lee YK, Lim BS, Rhee SH, Yang HC. Effect of tooth-whitening strips and films on changes in color and surface roughness of resin composites. Clin Oral Investig. 2004;8:118–22.
- Fong H, Dickens SH, Flaim GM. Evaluation of dental restorative composites containing polyhedral oligomeric silsesquioxane methacrylate. Dent Mater. 2005;21:520–9.
- Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent. 2005;33:389–98.
- Oysaed H, Ruyter IE. Water sorption and filler characteristics of composites for use in posterior teeth. J Dent Res. 1986;65:1315–8.
- Um CM, Ruyter IE. Staining of resin-based veneering materials with coffee and tea. Quintessence Int. 1991;22:377–86.
- Madhyastha PS, Naik DG, Kotian R, Srikant N, Bhat KM. Effect of staining solutions on color stability of silorane & methacrylate restorative material. Int J Biomed Sci. 2015;11:29–34.
- da Silva MA, Fardin AB, de Vasconcellos RC, Santos Lde M, Tonholo J, da Silva JG, Jr, et al. Analysis of roughness and surface hardness of a dental composite using atomic force microscopy and microhardness testing. Microsc Microanal. 2011;17:446–51.
- Pires-de-Souza Fde C, Garcia Lda F, Hamida HM, Casemiro LA. Color stability of composites subjected to accelerated aging after curing using either a halogen or a light emitting diode source. Braz Dent J. 2007;18:119–23.
- Ertaş E, Güler AU, Yücel AC, Köprülü H, Güler E. Color stability of resin composites after immersion in different drinks. Dent Mater J. 2006;25:371–6.
- Bahannan SA. Effects of different bleaching agent concentrations on surface roughness and microhardness of esthetic restorative materials. Saudi J Dent Res. 2015;6:124–8.
- Türkün LS, Türkün M. Effect of bleaching and repolishing procedures on coffee and tea stain removal from three anterior composite veneering materials. J Esthet Restor Dent. 2004;16:290–301.
- Atali PI, Topbasi FB. The effect of different bleaching methods on the surface roughness and hardness of resin composites. J Dent Oral Hyg. 2011;3:10–7.
Source: PubMed