Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Evaluation of Orthodontic Bands Coated With Nano-silver Fluoride

4 novembre 2026 mis à jour par: Ebrahim N Abbas

Evaluation of Antibacterial and Remineralization Effect of Orthodontic Bands Coated With Nano-silver Fluoride: A Randomized Controlled Clinical Trial

  1. Aim of the Study To evaluate the antibacterial and enamel remineralization effects of nano-silver fluoride-coated orthodontic bands compared with conventional non-coated bands in orthodontic patients over 6 months.

  2. What Will I Do in This Study?

    • Conduct a randomized split-mouth clinical trial involving 25 patients.
    • Place orthodontic bands on the maxillary first molars, with one band coated and the contralateral band left uncoated as the control.
    • Randomize the right or left side receiving the coated band.
    • Collect dental plaque samples after 24 hours, 3 months, and 6 months to measure bacterial counts, particularly Streptococcus mutans, using colony-forming unit (CFU) counting.
    • Assess enamel demineralization and remineralization using DIAGNOdent measurements before band placement and after band removal.
  3. Materials Used

    • Orthodontic bands: Stainless steel molar bands.
    • Silver nanoparticles (AgNPs): Concentration of 5 µg/mL, with an average particle size of 40 nm.
    • Fluoride: Concentration of 5 ppm.
    • Coating technique: Dip coating, followed by air-drying and incubator drying.

Aperçu de l'étude

Statut

Actif, ne recrute pas

Les conditions

Intervention / Traitement

Description détaillée

  1. Background Fixed orthodontic appliances, particularly orthodontic molar bands, contribute significantly to increased plaque retention and bacterial accumulation around the teeth. This heightens the risk of enamel demineralization and the formation of white spot lesions (WSLs). Streptococcus mutans is considered one of the primary etiologic agents in this process, owing to its ability to produce acids that lower plaque pH and initiate enamel demineralization.

    Because conventional preventive measures rely heavily on patient compliance and optimal oral hygiene, research has shifted toward developing orthodontic materials with intrinsic antibacterial properties. Nano-Silver Fluoride (NSF)-which combines silver nanoparticles with fluoride-presents a promising agent, as it is expected to reduce bacterial colonization while promoting enamel remineralization. However, clinical evidence evaluating its direct application as a coating on orthodontic molar bands remains limited.

  2. Aim of the Study This split-mouth clinical trial aims to evaluate the antibacterial efficacy and enamel remineralization potential of stainless steel orthodontic molar bands coated with Nano-Silver Fluoride compared to uncoated bands during active orthodontic treatment.

  3. Interventions This study will be conducted on 25 patients using a split-mouth design, where each patient will receive a coated molar band on one maxillary first molar and an uncoated band on the contralateral maxillary first molar, with side allocation determined through randomization.

    Experimental Group: Stainless steel molar bands coated with a Nano-Silver Fluoride solution containing silver nanoparticles (5 µg/mL concentration, 40 nm particle size) and fluoride (5 ppm concentration).

    Control Group: Conventional, uncoated stainless steel molar bands.

    Coating Method: Dip-coating technique, where the bands are thoroughly cleaned, submerged in the NSF solution for a specified duration, air-dried, and subsequently oven-dried to ensure a stable coating layer.

    Assessment of Antibacterial Effect: Plaque samples will be collected from the area surrounding the bands to quantify Streptococcus mutans levels using Colony-Forming Units (CFU) at 24 hours, 3 months, and 6 months.

    Assessment of Enamel Remineralization: Changes in white spot lesions and enamel demineralization levels will be measured using DIAGNOdent before band placement and after band removal according to the study's follow-up schedule.

  4. Summary / Conclusion This study investigates the feasibility of transforming orthodontic molar bands from passive mechanical retention devices into active preventive components that combine antibacterial activity with the preservation of enamel integrity during orthodontic therapy.

Type d'étude

Interventionnel

Inscription (Réel)

25

Phase

  • N'est pas applicable

Contacts et emplacements

Cette section fournit les coordonnées de ceux qui mènent l'étude et des informations sur le lieu où cette étude est menée.

Lieux d'étude

      • Al Mansurah, Egypte
        • Mansoura university

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

  • Enfant
  • Adulte
  • Adulte plus âgé

Accepte les volontaires sains

Oui

Sexes éligibles pour l'étude

Tout

La description

Inclusion Criteria:

  • • Patients presenting with malocclusion, including crowding, spacing, increased overjet or overbite, crossbite, or open bite.

    • Presence of a sufficient number of erupted permanent teeth to allow effective placement and retention of orthodontic appliances.
    • Good oral and periodontal health, with no active caries or untreated periodontal disease.
    • Systemically healthy patients, or those with controlled medical conditions that do not contraindicate orthodontic tooth movement.
    • Patients demonstrating adequate motivation and willingness to cooperate, including maintaining oral hygiene and attending regular follow-up visits.

Exclusion Criteria:

  • • Presence of active dental caries or Poor oral hygiene.

    • Active periodontal disease, including gingivitis or periodontitis with attachment loss.
    • Patients with uncontrolled systemic diseases that may affect bone metabolism or healing (e.g., uncontrolled diabetes, metabolic bone disorders).
    • Use of medications that adversely affect orthodontic tooth movement and cannot be medically managed.
    • Insufficient erupted teeth to support orthodontic appliances.
    • Low motivation or poor compliance, including failure to attend appointments or follow treatment instructions.

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: La prévention
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation croisée
  • Masquage: Double

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: Nano-silver Fluoride Coated Orthodontic Bands

Participants receiving orthodontic bands coated with Nano-silver Fluoride (NSF).

Orthodontic bands coated with Nano-silver Fluoride (NSF) solution applied to cementation to evaluate antibacterial and remineralization effects.

Autre: Uncoated Orthodontic Bands

Participants receiving conventional uncoated orthodontic bands.

Standard uncoated orthodontic bands were used as a control group.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Change from baseline in Streptococcus mutans count in plaque around the band
Délai: Baseline, 3 months, and 6 months post-placement.

Plaque samples will be collected from around the orthodontic band to quantify Streptococcus mutans levels using Colony Forming Units (CFU/mL) count.

Baseline, 3 months, and 6 months post-placement.

Mesures de résultats secondaires

Mesure des résultats
Description de la mesure
Délai
Remineralization Effect
Délai: Baseline, 3 months, and 6 months post-placement.

The incidence and severity of white spot lesions on the first molars will be assessed using laser fluorescence (DIAGNOdent).

Baseline, 3 months, and 6 months post-placement.

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Parrainer

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude (Réel)

8 août 2026

Achèvement primaire (Estimé)

8 février 2027

Achèvement de l'étude (Estimé)

8 mars 2027

Dates d'inscription aux études

Première soumission

22 octobre 2026

Première soumission répondant aux critères de contrôle qualité

4 novembre 2026

Première publication (Réel)

10 novembre 2026

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

10 novembre 2026

Dernière mise à jour soumise répondant aux critères de contrôle qualité

4 novembre 2026

Dernière vérification

1 octobre 2026

Plus d'information

Termes liés à cette étude

Autres numéros d'identification d'étude

  • MS.26.02.236

Plan pour les données individuelles des participants (IPD)

Prévoyez-vous de partager les données individuelles des participants (DPI) ?

NON

Informations sur les médicaments et les dispositifs, documents d'étude

Étudie un produit pharmaceutique réglementé par la FDA américaine

Non

Étudie un produit d'appareil réglementé par la FDA américaine

Non

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .