Cette page a été traduite automatiquement et l'exactitude de la traduction n'est pas garantie. Veuillez vous référer au version anglaise pour un texte source.

Influence of Low-level Laser Therapy on Stability and Displacement of Orthodontic Miniscrew Implants

17 janvier 2018 mis à jour par: Guido Artemio Marañón Vásquez, University of Sao Paulo

Effect of Low-level Laser Therapy on Stability and Displacement of Orthodontic Miniscrew Implants With Mediate and Immediate Force Application

The purpose of this study is to evaluate the effect of Low level laser therapy on stability and displacement of orthodontic miniscrew implants using two different force application protocols.

Aperçu de l'étude

Description détaillée

The aim of this study is to evaluate the effect of Low level laser therapy (LLLT) on stability and displacement of orthodontic miniscrew implants with mediate and immediate force application. They will be assessed 48 miniscrew implants placed in patients in orthodontic treatment at the postgraduate clinical in Orthodontics, at School of Dentistry of Ribeirão Preto, University of São Paulo. They will be randomly divided into 4 groups: 1- LLLT and immediate force application; 2- LLLT and force application 4 weeks after implantation; 3- immediate force application without LLLT and 4- force application 4 weeks after implantation without LLLT. Orthodontic force of 150 gF will be applied for 3 months. A low power laser device Therapy XT with a wavelength of 660 nm and output of 100 mW immediately after implantation (energy density: 4J/cm2), and 808 nm with 100 mW (energy density: 8J/cm2), every 48 hours for two weeks in the following applications will be used. The stability will be assessed using Resonance Frequency Analysis (RFA) at three times: the implantation day (T1), one month (T2) and after 3 months of force application (T3). Stability measures will be evaluated in Implant Stability Quotient (ISQ). To assess the amount of miniscrew implant displacement, it will be used Cone Beam Computed Tomography (CBCT) at the beginning (CT1) and final of the application of orthodontic force (CT2). Three-dimensional models will be created in specific programs and superimpositions of CT1 and CT2 will be used to measure the distance in millimeters between inicial and final position. The evaluation will be carried out in three points: head of miniscrew implant (point C), thread (point R) and apex of miniscrew implant (point A). The results will be statistically analyzed according to nature of the data and the significance level to be adopted will be 5%.

Type d'étude

Interventionnel

Inscription (Réel)

29

Phase

  • N'est pas applicable

Critères de participation

Les chercheurs recherchent des personnes qui correspondent à une certaine description, appelée critères d'éligibilité. Certains exemples de ces critères sont l'état de santé général d'une personne ou des traitements antérieurs.

Critère d'éligibilité

Âges éligibles pour étudier

11 ans et plus (Enfant, Adulte, Adulte plus âgé)

Accepte les volontaires sains

Oui

Sexes éligibles pour l'étude

Tout

La description

Inclusion Criteria:

  • Patient with permanent teeth.
  • Use of miniscrews in orthodontic planning.
  • Miniscrews placed in the labial upper and lower posterior regions.
  • Patient who agree to participate (Informed consent)

Exclusion Criteria:

  • Patient with systemic disease.
  • Patient with periodontal disease and/or inadequate oral hygiene.
  • Use of drugs chronically.
  • Patients that consume alcohol or tobacco.
  • Use of fixed palatal or lingual orthodontic devices.

Plan d'étude

Cette section fournit des détails sur le plan d'étude, y compris la façon dont l'étude est conçue et ce que l'étude mesure.

Comment l'étude est-elle conçue ?

Détails de conception

  • Objectif principal: Soins de soutien
  • Répartition: Randomisé
  • Modèle interventionnel: Affectation parallèle
  • Masquage: Seul

Armes et Interventions

Groupe de participants / Bras
Intervention / Traitement
Expérimental: LLLT + immediate force
Use of Low-level laser therapy and not mediate orthodontic force application (150 gF the day of the implantation).
  1. Immediate post-operative period (implantation day) Red emission (660 nm) Energy density: 4 J/cm2 Power: 0.1W Irradiation area: 0,5 cm2 One application, 10 seconds of non-contact irradiation (01 point at the area surrounding the miniscrew) at a distance of 15,5 mm.
  2. Mediate post-operative period (after implantation day) Infrared emission (808 nm) Energy density: 8 J/cm2 Power: 0.1W Irradiation area: 0,5 cm2 6 applications every 48 hours after the day of implantation, 20 seconds of non-contact irradiation (01 point on the area surrounding the miniscrew) at a distance of 15,5 mm.
Expérimental: LLLT + mediate force
Use of Low-level laser therapy and mediate orthodontic force application (150 gF 4 weeks after the day of the implantation).
  1. Immediate post-operative period (implantation day) Red emission (660 nm) Energy density: 4 J/cm2 Power: 0.1W Irradiation area: 0,5 cm2 One application, 10 seconds of non-contact irradiation (01 point at the area surrounding the miniscrew) at a distance of 15,5 mm.
  2. Mediate post-operative period (after implantation day) Infrared emission (808 nm) Energy density: 8 J/cm2 Power: 0.1W Irradiation area: 0,5 cm2 6 applications every 48 hours after the day of implantation, 20 seconds of non-contact irradiation (01 point on the area surrounding the miniscrew) at a distance of 15,5 mm.
Mediate force application protocol: orthodontic force application (150 gF) 4 weeks after the day of the implantation.
Aucune intervention: Immediate force application
Not mediate orthodontic force application (150 gF the day of the implantation), without use of Low-level laser therapy.
Expérimental: Mediate force application
Mediate orthodontic force application (150 gF 4 weeks after the day of the implantation), without use of Low-level laser therapy.
Mediate force application protocol: orthodontic force application (150 gF) 4 weeks after the day of the implantation.

Que mesure l'étude ?

Principaux critères de jugement

Mesure des résultats
Description de la mesure
Délai
Change from baseline miniscrew implant stability at 1 and 3 months of force application.
Délai: T1: Implantation day; T2: after 1 month; and, T3: after 3 months of force application.
It will be used a Resonance frequency analysis (RFA) equipment. Stability measures will be evaluated using a unique unit of measure: Implant stability quotient (ISQ). All groups will be evaluated the day of the implantation (T1) and after 1 month (T2).The last stability measure (T3) will be done 3 months after the implantation day in the groups without mediate force application, and 4 months after the implantation day in the groups with mediate force application.
T1: Implantation day; T2: after 1 month; and, T3: after 3 months of force application.
Change from baseline miniscrew implant position at 3 months of force application.
Délai: CT1: Implantation day; and, CT2: 3 months of orthodontic force application.
It will be used Cone Beam Computed tomography (CBCT). Three-dimensional models will be created in specific programs and superimpositions of CT1 and CT2 will be used to measure the distance in millimeters between initial and final position.
CT1: Implantation day; and, CT2: 3 months of orthodontic force application.

Collaborateurs et enquêteurs

C'est ici que vous trouverez les personnes et les organisations impliquées dans cette étude.

Les enquêteurs

  • Chercheur principal: Guido A Marañón Vásquez, DDS, University of Sao Paulo

Dates d'enregistrement des études

Ces dates suivent la progression des dossiers d'étude et des soumissions de résultats sommaires à ClinicalTrials.gov. Les dossiers d'étude et les résultats rapportés sont examinés par la Bibliothèque nationale de médecine (NLM) pour s'assurer qu'ils répondent à des normes de contrôle de qualité spécifiques avant d'être publiés sur le site Web public.

Dates principales de l'étude

Début de l'étude

1 mars 2016

Achèvement primaire (Réel)

1 février 2017

Achèvement de l'étude (Réel)

1 août 2017

Dates d'inscription aux études

Première soumission

23 août 2016

Première soumission répondant aux critères de contrôle qualité

31 août 2016

Première publication (Estimation)

7 septembre 2016

Mises à jour des dossiers d'étude

Dernière mise à jour publiée (Réel)

18 janvier 2018

Dernière mise à jour soumise répondant aux critères de contrôle qualité

17 janvier 2018

Dernière vérification

1 janvier 2018

Plus d'information

Ces informations ont été extraites directement du site Web clinicaltrials.gov sans aucune modification. Si vous avez des demandes de modification, de suppression ou de mise à jour des détails de votre étude, veuillez contacter register@clinicaltrials.gov. Dès qu'un changement est mis en œuvre sur clinicaltrials.gov, il sera également mis à jour automatiquement sur notre site Web .

S'abonner