Effect of Foot Orthoses on Kneecap Position in Adults With Flexible Flatfoot
2026년 7월 27일 업데이트: Regionshospital Nordjylland
Does Correction of Pronated Foot Posture Alter Patellofemoral Alignment? A Weight-Bearing Cone Beam CT Proof-of-Concept Study in Individuals With Flexible Flatfoot
This study will look at whether correcting a flat foot position with foot orthoses, also called shoe inserts, can change the position of the kneecap during standing.
Some people with flexible flatfoot have a foot position that may affect how the lower leg and knee are aligned. This may influence the way the kneecap sits or tilts in relation to the thigh bone. Foot orthoses are often used for knee and foot problems, but it is not clear whether they directly change kneecap position when a person is standing and bearing weight.
The study will include adults with flexible flatfoot. Each participant will have low-dose, three-dimensional weight-bearing cone beam CT scans while standing in different foot positions: their natural foot position, with foot orthoses, and with foot orthoses inside a neutral running shoe. Scans will be performed with the knees straight and slightly bent.
The main hypothesis is that correcting a pronated flat foot position with foot orthoses will reduce sideways tilt and outward shift of the kneecap compared with the participant's natural foot position. The study will also examine whether changes in foot position are accompanied by changes in lower-limb rotation.
This study does not test whether foot orthoses reduce pain. Instead, it is designed to understand the immediate mechanical effect of foot correction on kneecap position.
연구 개요
상태
상태
아직 모집하지 않음
정황
정황
개입 / 치료
개입 / 치료
연구 유형
연구 유형
중재적
등록 (추정된)
등록
10
단계
단계
- 해당 없음
연락처 및 위치
이 섹션에서는 연구를 수행하는 사람들의 연락처 정보와 이 연구가 수행되는 장소에 대한 정보를 제공합니다.
연구 연락처
연구 연락처
- 이름: Mads K Hilligsøe, Doctor
- 전화번호: +4542210433
- 이메일: m.hilligsoee@rn.dk
연구 장소
-
-
-
Frederikshavn, 덴마크, 9900
- Sportsmedicinsk Center, Frederikshavn Sygehus
-
연락하다:
- Mads K Hilligsøe, Doctor
- 전화번호: +4542210433
- 이메일: m.hilligsoee@rn.dk
-
-
참여기준
연구원은 적격성 기준이라는 특정 설명에 맞는 사람을 찾습니다. 이러한 기준의 몇 가지 예는 개인의 일반적인 건강 상태 또는 이전 치료입니다.
자격 기준
자격 기준
공부할 수 있는 나이
- 성인
건강한 자원 봉사자를 받아들입니다
아니
설명
Inclusion criteria
- Age 18-35 years
Pronated foot posture, defined as a Foot Posture Index (FPI) score of ≥ +6, including a calcaneal frontal plane position sub-score of +2. 25,26
○ A trained examiner will assess FPI; inclusion is based on the right foot.
- Flexible flatfoot deformity, defined as restoration of the medial longitudinal arch during lift of the first toe.
Exclusion criteria
- Knee pain during standing or at 20° knee flexion
- Clinical signs of tibiofemoral instability
- Previous knee or foot surgery
- History of patellar dislocation
- Neuromuscular disease
- Pregnancy
- Inability to perform full weight bearing during scans
공부 계획
이 섹션에서는 연구 설계 방법과 연구가 측정하는 내용을 포함하여 연구 계획에 대한 세부 정보를 제공합니다.
연구는 어떻게 설계됩니까?
디자인 세부사항
- 주 목적: 기초 과학
- 할당: 해당 없음
- 중재 모델: 단일 그룹 할당
- 마스킹: 없음(오픈 라벨)
팔의 수
1
무기와 개입
참가자 그룹 / 팔참가자 그룹 / 팔 |
개입 / 치료개입 / 치료 |
|---|---|
|
실험적: Foot Posture Conditions
Participants will undergo standardized weight-bearing cone beam CT scans under three foot posture conditions: natural foot posture, barefoot correction with foot orthoses, and correction with foot orthoses inside a standardized neutral running shoe. Each condition will be assessed with the knees fully extended and at 20 degrees of knee flexion. The foot orthosis will be selected for each participant to correct the rearfoot toward neutral alignment. If needed, an additional forefoot wedge may be used to achieve neutral alignment. The same orthotic correction will be maintained across the relevant scan conditions. |
Standardized prefabricated foot orthoses will be used to correct a pronated foot posture toward neutral rearfoot alignment during weight-bearing. Three orthosis configurations will be available, differing in medial arch height and degree of lateral calcaneal tilt. For each participant, the orthosis that best achieves neutral rearfoot alignment will be selected. If forefoot varus prevents neutral rearfoot alignment, an additional medial forefoot wedge may be applied under the first metatarsal. The selected orthotic configuration, including any forefoot wedge, will be kept unchanged during the relevant scan conditions. The intervention will be tested both barefoot and inside a standardized neutral running shoe. |
연구는 무엇을 측정합니까?
주요 결과 측정
주요 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Change in Lateral Patellar Tilt
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Lateral patellar tilt will be measured in degrees on standardized weight-bearing cone beam CT images.
The measure describes the sideways tilt of the kneecap in relation to the thigh bone.
It is defined as the angle between the transverse axis of the patella and the posterior condylar axis of the femur.
Measurements will be performed for each foot posture condition: natural foot posture, barefoot correction with foot orthoses, and correction with foot orthoses inside a neutral running shoe.
Measurements will be assessed at both 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Change in Bisect Offset
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Bisect offset will be measured as a percentage on standardized weight-bearing cone beam CT images.
The measure describes the sideways position of the kneecap in relation to the groove of the thigh bone.
It is defined as the percentage of lateral displacement of the midpoint of the patella from the midpoint of the trochlear groove.
Higher percentages indicate greater lateral displacement of the kneecap.
Measurements will be performed for each foot posture condition: natural foot posture, barefoot correction with foot orthoses, and correction with foot orthoses inside a neutral running shoe.
Measurements will be assessed at both 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
2차 결과 측정
2차 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Change in Tibial Tuberosity-Trochlear Groove Distance
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Tibial tuberosity-trochlear groove distance will be measured on standardized weight-bearing cone beam CT images and reported in millimeters.
The measure describes the side-to-side distance between the tibial tuberosity, where the patellar tendon attaches on the shin bone, and the center of the trochlear groove of the thigh bone, where the kneecap moves.
Measurements will be performed for each foot posture condition: natural foot posture, barefoot correction with foot orthoses, and correction with foot orthoses inside a neutral running shoe.
Measurements will be assessed at both 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Change in Transmalleolar Rotation Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Transmalleolar rotation will be measured in degrees on standardized weight-bearing cone beam CT images.
The measure describes the rotation of the ankle axis in relation to the long axis of the foot.
The ankle axis is defined as a line through the medial and lateral malleoli.
The foot axis is defined by an adjusted sagittal foot reference plane derived from calcaneal and metatarsal head landmarks on cone beam CT.
Transmalleolar rotation is calculated as the angle between the malleolar line and this foot axis.
Positive values indicate external rotation relative to the foot axis, and negative values indicate internal rotation.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Change in Tibial Rotation Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Tibial rotation will be measured in degrees on standardized weight-bearing cone beam CT images.
The measure describes the rotation of the shin bone in relation to the long axis of the foot.
It is defined as the angle between a line tangent to the posterior surface of the proximal tibia and the foot axial rotation reference.
The foot axial rotation reference is an adjusted sagittal foot plane derived from calcaneal and metatarsal head landmarks on cone beam CT.
Positive values indicate external rotation relative to the foot axis, and negative values indicate internal rotation.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Change in Femoral Rotation Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Femoral rotation will be measured in degrees on standardized weight-bearing cone beam CT images.
The measure describes the rotation of the thigh bone in relation to the long axis of the foot.
It is defined as the angle between a line tangent to the posterior femoral condyles and the foot axial rotation reference.
The foot axial rotation reference is an adjusted sagittal foot plane derived from calcaneal and metatarsal head landmarks on cone beam CT.
Positive values indicate external rotation relative to the foot axis, and negative values indicate internal rotation.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Change in Patellar Rotation Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Patellar rotation will be measured in degrees on standardized weight-bearing cone beam CT images.
The measure describes the rotation of the kneecap in relation to the long axis of the foot.
It is defined as the angle between the transverse axis of the patella and the foot axial rotation reference.
The foot axial rotation reference is an adjusted sagittal foot plane derived from calcaneal and metatarsal head landmarks on cone beam CT.
Positive values indicate external rotation relative to the foot axis, and negative values indicate internal rotation.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
기타 결과 측정
기타 결과 측정
결과 측정 |
측정값 설명 |
기간 |
|---|---|---|
|
Change in Navicular Plantar Position Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Navicular plantar position will be measured in millimeters on standardized weight-bearing cone beam CT images.
The measure describes the vertical position of the navicular bone, which is a bone on the inner side of the midfoot and an indicator of medial arch position.
It is defined as the perpendicular distance between the lowest point of the navicular bone and the tripod-adjusted axial foot plane.
This reference plane is based on the plantar support points of the foot.
Greater values indicate that the navicular bone is positioned farther from the plantar reference plane.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Change in Navicular Medial Displacement Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion.
|
Navicular medial displacement will be measured in millimeters on standardized weight-bearing cone beam CT images.
The measure describes the side-to-side position of the navicular bone, which is a bone on the inner side of the midfoot and an indicator of foot pronation and medial arch position.
It is defined as the perpendicular distance from the most medial point of the navicular bone to the adjusted sagittal foot reference plane.
This reference plane is derived from calcaneal and metatarsal head landmarks on cone beam CT and approximates the long axis of the foot.
Greater values indicate that the navicular bone is positioned farther medially relative to the foot reference plane.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion.
|
|
Change in Foot Axial Rotation Across Foot Posture Conditions
기간: During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
Foot axial rotation will be measured in degrees on standardized weight-bearing cone beam CT images.
The measure describes the toe-in or toe-out orientation of the foot.
It is defined as the angle between the adjusted sagittal foot reference plane and the global sagittal plane.
The adjusted sagittal foot reference plane is derived from calcaneal and metatarsal head landmarks and approximates the long axis of the foot.
Positive values indicate external rotation, or toe-out, and negative values indicate internal rotation, or toe-in.
Measurements will be performed for each foot posture condition at 0 and 20 degrees of knee flexion.
Change will be reported as the within-participant difference between foot posture conditions.
|
During one imaging visit: natural foot posture, immediately after barefoot orthotic correction, and immediately after orthotic correction in a neutral running shoe, at 0 and 20 degrees of knee flexion
|
|
Baseline Femoral Anteversion
기간: Baseline, during the first weight-bearing cone beam CT scan
|
Femoral anteversion will be measured in degrees on the baseline weight-bearing cone beam CT scan.
The measure describes the forward rotation of the femoral neck in relation to the distal femur.
It is defined as the angle between the femoral neck axis and the posterior condylar axis of the distal femur.
The femoral neck axis is defined as a line connecting the center of the femoral head and the center of the femoral neck.
The posterior condylar axis is defined as a line tangential to the most posterior aspects of the medial and lateral femoral condyles.
Positive values indicate increased femoral anteversion.
This measure will be used to describe baseline femoral morphology and to account for anatomical variation that may influence lower-limb rotational alignment.
|
Baseline, during the first weight-bearing cone beam CT scan
|
|
Baseline Foot Posture Index
기간: Baseline, during the screening assessment before the imaging visit
|
Foot Posture Index will be assessed at baseline by a trained examiner during standing.
The measure describes the participant's static foot posture, including the degree of pronation or supination.
The Foot Posture Index is a clinical scoring tool with six items, each scored from -2 to +2, giving a total score from -12 to +12.
Lower scores indicate a more supinated foot posture, and higher scores indicate a more pronated foot posture.
In this study, baseline pronated foot posture is defined as a Foot Posture Index score of +6 or higher, including a calcaneal frontal-plane position sub-score of +2.
Inclusion is based on the right foot.
|
Baseline, during the screening assessment before the imaging visit
|
|
Baseline Calcaneal Frontal-Plane Angle
기간: Baseline, during standing assessment before foot posture correction
|
Calcaneal frontal-plane angle will be measured in degrees at baseline during standing.
The measure describes the frontal-plane position of the heel bone in relation to the lower leg and reflects the degree of rearfoot valgus or varus.
It is defined as the angle between a posterior calcaneal bisection line and a vertical tibial reference line.
The posterior calcaneal bisection line is established using markers on the proximal and distal thirds of the posterior calcaneus.
The tibial reference line is defined by the vertical midline of the distal third of the tibia.
If used in the dataset coding, positive values will indicate calcaneal valgus and negative values will indicate calcaneal varus.
|
Baseline, during standing assessment before foot posture correction
|
|
Age
기간: At inclusion
|
At inclusion
|
|
|
BMI
기간: At inclusion
|
At inclusion
|
|
|
Sex
기간: At inclusion
|
At inclusion
|
|
|
Perceived Comfort of the Selected Foot Orthosis Assessed by a 10-Point Numeric Rating Scale
기간: Immediately after completion of the imaging protocol during the imaging visit
|
Perceived comfort of the selected foot orthosis will be assessed immediately after completion of the imaging protocol using a 10-point numeric rating scale.
Participants will be asked to rate how comfortable the selected foot orthosis felt during the scan conditions.
The scale ranges from 1 to 10, where 1 indicates "not comfortable at all" and 10 indicates "maximally comfortable."
Higher scores indicate greater perceived comfort of the orthosis.
|
Immediately after completion of the imaging protocol during the imaging visit
|
|
Baseline Patellar Height Assessed by Patellar Articular Overlap
기간: Baseline, during the first weight-bearing cone beam CT scan before foot posture correction
|
Patellar height will be assessed at baseline using patellar articular overlap on weight-bearing cone beam CT images.
Patellar articular overlap describes the proportion of the kneecap joint surface that overlaps with, or is positioned within, the trochlear groove of the thigh bone.
It will be expressed as a percentage.
Higher percentages indicate greater overlap between the patellar articular surface and the trochlear groove, while lower percentages indicate less overlap.
This measure will be used to describe baseline patellofemoral morphology and alignment.
|
Baseline, during the first weight-bearing cone beam CT scan before foot posture correction
|
|
Baseline Lateral Trochlear Inclination
기간: Baseline, during the first weight-bearing cone beam CT scan before foot posture correction
|
Lateral trochlear inclination will be measured in degrees on the baseline weight-bearing cone beam CT scan.
The measure describes the slope of the outer part of the trochlear groove, which is the groove of the thigh bone where the kneecap moves.
It is defined as the angle of the lateral trochlear facet in relation to the posterior condylar line of the femur.
This measure will be used to describe baseline trochlear morphology and patellofemoral anatomy.
|
Baseline, during the first weight-bearing cone beam CT scan before foot posture correction
|
|
Baseline Sulcus Angle
기간: Baseline, during the first weight-bearing cone beam CT scan before foot posture correction
|
Sulcus angle will be measured in degrees on the baseline weight-bearing cone beam CT scan.
The measure describes the shape and depth of the trochlear groove, which is the groove of the thigh bone where the kneecap moves.
It is defined as the angle formed by three points: the highest point of the medial trochlear facet, the deepest point of the trochlear groove, and the highest point of the lateral trochlear facet.
A larger sulcus angle generally indicates a flatter or shallower trochlear groove, while a smaller angle indicates a deeper groove.
This measure will be used to describe baseline trochlear morphology and patellofemoral anatomy.
|
Baseline, during the first weight-bearing cone beam CT scan before foot posture correction
|
공동 작업자 및 조사자
여기에서 이 연구와 관련된 사람과 조직을 찾을 수 있습니다.
협력자
협력자
연구 기록 날짜
이 날짜는 ClinicalTrials.gov에 대한 연구 기록 및 요약 결과 제출의 진행 상황을 추적합니다. 연구 기록 및 보고된 결과는 공개 웹사이트에 게시되기 전에 특정 품질 관리 기준을 충족하는지 확인하기 위해 국립 의학 도서관(NLM)에서 검토합니다.
연구 주요 날짜
연구 시작 (추정된)
연구 시작
2026년 7월 1일
기본 완료 (추정된)
기본 완료
2026년 12월 1일
연구 완료 (추정된)
연구 완료
2026년 12월 1일
연구 등록 날짜
최초 제출
최초 제출
2026년 6월 25일
QC 기준을 충족하는 최초 제출
QC 기준을 충족하는 최초 제출
2026년 6월 25일
처음 게시됨 (실제)
처음 게시됨
2026년 7월 1일
연구 기록 업데이트
마지막 업데이트 게시됨 (실제)
마지막 업데이트 게시됨
2026년 7월 28일
QC 기준을 충족하는 마지막 업데이트 제출
QC 기준을 충족하는 마지막 업데이트 제출
2026년 7월 27일
마지막으로 확인됨
마지막으로 확인됨
2026년 7월 1일
추가 정보
이 연구와 관련된 용어
키워드
추가 관련 MeSH 약관
기타 연구 ID 번호
기타 연구 ID 번호
- N-20260014
개별 참가자 데이터(IPD) 계획
개별 참가자 데이터(IPD)를 공유할 계획입니까?
아니요
IPD 계획 설명
Individual participant data will not be shared publicly.
The study includes a small sample and weight-bearing cone beam CT imaging data, which may carry a risk of participant re-identification even after pseudonymization.
Study data will be stored on secure, access-controlled servers in accordance with GDPR and regional data protection requirements.
Results will be reported only in aggregate form.
약물 및 장치 정보, 연구 문서
미국 FDA 규제 의약품 연구
아니
미국 FDA 규제 기기 제품 연구
아니
이 정보는 변경 없이 clinicaltrials.gov 웹사이트에서 직접 가져온 것입니다. 귀하의 연구 세부 정보를 변경, 제거 또는 업데이트하도록 요청하는 경우 register@clinicaltrials.gov. 문의하십시오. 변경 사항이 clinicaltrials.gov에 구현되는 즉시 저희 웹사이트에도 자동으로 업데이트됩니다. .