Effectiveness of Carbon Filters to Reduce the Anesthetic Gas Concentration in an Anesthetized Patient

September 9, 2014 updated by: Robert Greenberg, MD, Johns Hopkins University
Malignant hyperthermia is a potentially fatal inherited disorder triggered by exposure to volatile anesthetic gases, most commonly recognized in children during anesthesia. Carbon filters have been used to scavenge various gases. A new carbon filter (Vapor Clean, Dynasthetics, LLC, Salt Lake City, Utah) with a 510(k) clearance specifically for scavenging anesthetic gases is being marketed, though the filter itself has never been studied in vivo. Bench studies conducted by the manufacturer of the product demonstrate it is extremely effective in reducing the volatile gas output from an anesthesia machine within 2 minutes. This pilot study will measure the effect on volatile gas concentration in non-malignant hyperthermia susceptible patients. Twelve (12) patients will undergo standard anesthetic induction using inhalational anesthetic (Sevoflurane®) and maintained on 3% for 30 minutes to attain steady state concentrations.1 At that time, a total intravenous anesthetic technique will be started and maintained throughout the case. Simultaneously a Vapor Clean filterset will be placed in the breathing circuit (inspiratory and expiratory limbs). Volatile gas concentration will be measured and recorded. This research will determine the feasibility of using this carbon filter to quickly reduce the breathing circuit gas concentration of volatile anesthetic in the clinical setting. This is fundamental in establishing this as a key life saving measure in eliminating the stimulus in a malignant hyperthermia event.

Study Overview

Status

Status

Indicates the current recruitment status or the expanded access status.
Withdrawn

Conditions

Conditions

The disease, disorder, syndrome, illness, or injury that is being studied. On ClinicalTrials.gov, conditions may also include other health-related issues, such as lifespan, quality of life, and health risks.

Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.

Detailed Description

see above.

Study Type

Study Type

Describes the nature of a clinical study. Study types include interventional studies (also called clinical trials), observational studies (including patient registries), and expanded access.
Interventional

Phase

Phase

The stage of a clinical trial studying a drug or biological product, based on definitions developed by the U.S. Food and Drug Administration (FDA). The phase is based on the study's objective, the number of participants, and other characteristics. There are five phases: Early Phase 1 (formerly listed as Phase 0), Phase 1, Phase 2, Phase 3, and Phase 4. Not Applicable is used to describe trials without FDA-defined phases, including trials of devices or behavioral interventions.
  • Not Applicable

Participation Criteria

Researchers look for people who fit a certain description, called eligibility criteria. Some examples of these criteria are a person's general health condition or prior treatments.

Eligibility Criteria

Eligibility Criteria

The key requirements that people who want to participate in a clinical study must meet or the characteristics they must have. Eligibility criteria consist of both inclusion criteria (which are required for a person to participate in the study) and exclusion criteria (which prevent a person from participating). Types of eligibility criteria include whether a study accepts healthy volunteers, has age or age group requirements, or is limited by sex.

Ages Eligible for Study

2 years to 16 years (CHILD)

Accepts Healthy Volunteers

Yes

Genders Eligible for Study

All

Description

Inclusion Criteria:

  • healthy ASA PS I or II children 2 years to 16 years old
  • having general anesthesia for approximately 1 hour or more

Exclusion Criteria:

  • malignant hyperthermia susceptible patients (personal or family history)
  • patients with known neuromuscular disorders at high risk of malignant hyperthermia (e.g., muscular dystrophy)
  • egg or soy allergy
  • patient or parent refusal
  • pregnant patients

Study Plan

This section provides details of the study plan, including how the study is designed and what the study is measuring.

How is the study designed?

Design Details

  • Primary Purpose: TREATMENT
  • Allocation: RANDOMIZED
  • Interventional Model: PARALLEL
  • Masking: SINGLE

Arms and Interventions

Participant Group / Arm

Participant Group / Arm

A group or subgroup of participants in a clinical trial that receives a specific intervention/treatment, or no intervention, according to the trial's protocol.
Intervention / Treatment

Intervention / Treatment

A process or action that is the focus of a clinical study. Interventions include drugs, medical devices, procedures, vaccines, and other products that are either investigational or already available. Interventions can also include noninvasive approaches, such as education or modifying diet and exercise.
EXPERIMENTAL: Treatment (filter in circuit)
After baseline use of volatile anesthetic, this group will have carbon filter placed in-line.
Device: In-line Carbon filter (Vapor-Clean)
Carbon filter placed in anesthesia breathing circuit.
Other Names:
  • Vapor-Clean Brand Carbon Filter (Dynasthetics, LLC)
NO_INTERVENTION: No Intervention Control
After baseline use of volatile anesthetic, this group will NOT have carbon filter placed in-line.

What is the study measuring?

Primary Outcome Measures

Primary Outcome Measures

In a clinical study's protocol, the planned outcome measure that is the most important for evaluating the effect of an intervention/treatment. Most clinical studies have one primary outcome measure, but some have more than one.
Outcome Measure
Measure Description
Time Frame
Time to reduce Concentration of Volatile Anesthetic to <5ppm
Time Frame: every two minutes after filter applied until concentration is <5ppm or 30 minutes
At regular intervals (2 minutes) after application of the filters, the concentration of the volatile anesthetic will be measured. Primary outcome value will be the time to reduce breathing circuit volatile anesthetic concentration to <5ppm. If at 30 min the concentration is not <5ppm, then collection will be stopped.
every two minutes after filter applied until concentration is <5ppm or 30 minutes

Collaborators and Investigators

This is where you will find people and organizations involved with this study.

Sponsor

Sponsor

The organization or person who initiates the study and who has authority and control over the study.
Johns Hopkins University

Investigators

Investigators

A researcher involved in a clinical study. Related terms include site principal investigator, site sub-investigator, study chair, study director, and study principal investigator.
  • Principal Investigator: Robert S Greenberg, MD, Johns Hopkins University

Study record dates

These dates track the progress of study record and summary results submissions to ClinicalTrials.gov. Study records and reported results are reviewed by the National Library of Medicine (NLM) to make sure they meet specific quality control standards before being posted on the public website.

Study Major Dates

Study Start

Study Start

The actual date on which the first participant was enrolled in a clinical study. The "anticipated" study start date is the date that the researchers think will be the study start date.
July 1, 2012

Primary Completion (ANTICIPATED)

Primary Completion

The date on which the last participant in a clinical study was examined or received an intervention to collect final data for the primary outcome measure. Whether the clinical study ended according to the protocol or was terminated does not affect this date. For clinical studies with more than one primary outcome measure with different completion dates, this term refers to the date on which data collection is completed for all the primary outcome measures. The "anticipated" primary completion date is the date that the researchers think will be the primary completion date for the study.
June 1, 2013

Study Completion (ANTICIPATED)

Study Completion

The date on which the last participant in a clinical study was examined or received an intervention/treatment to collect final data for the primary outcome measures, secondary outcome measures, and adverse events (that is, the last participant's last visit). The "anticipated" study completion date is the date that the researchers think will be the study completion date.
June 1, 2013

Study Registration Dates

First Submitted

First Submitted

The date on which the study sponsor or investigator first submitted a study record to ClinicalTrials.gov. There is typically a delay of a few days between the first submitted date and the record's availability on ClinicalTrials.gov (the first posted date).
June 11, 2012

First Submitted That Met QC Criteria

First Submitted That Met QC Criteria

The date on which the study sponsor or investigator first submits a study record that is consistent with National Library of Medicine (NLM) quality control (QC) review criteria. The sponsor or investigator may need to revise and submit a study record one or more times before NLM's QC review criteria are met. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
June 19, 2012

First Posted (ESTIMATE)

First Posted

The date on which the study record was first available on ClinicalTrials.gov after National Library of Medicine (NLM) quality control (QC) review has concluded. There is typically a delay of a few days between the date the study sponsor or investigator submitted the study record and the first posted date.
June 20, 2012

Study Record Updates

Last Update Posted (ESTIMATE)

Last Update Posted

The most recent date on which changes to a study record were made available on ClinicalTrials.gov. There may be a delay between when the changes were submitted to ClinicalTrials.gov by the study's sponsor or investigator (the last update submitted date) and the last update posted date.
September 11, 2014

Last Update Submitted That Met QC Criteria

Last Update Submitted That Met QC Criteria

The most recent date on which the study sponsor or investigator submitted changes to a study record that are consistent with National Library of Medicine (NLM) quality control (QC) review criteria. It is the responsibility of the sponsor or investigator to ensure that the study record is consistent with the NLM QC review criteria.
September 9, 2014

Last Verified

Last Verified

The most recent date on which the study sponsor or investigator confirmed the information about a clinical study on ClinicalTrials.gov as accurate and current. If a study with a recruitment status of recruiting; not yet recruiting; or active, not recruiting has not been confirmed within the past 2 years, the study's recruitment status is shown as unknown.
September 1, 2014

More Information

Terms related to this study

Keywords

Additional Relevant MeSH Terms

Other Study ID Numbers

Other Study ID Numbers

Identifiers or ID numbers other than the NCT number that are assigned to a clinical study by the study's sponsor, funders, or others. These numbers may include unique identifiers from other trial registries and National Institutes of Health grant numbers.
  • NA_00049358

This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.

Cookie Settings

We use cookies to ensure that we give you the best experience on our website. For more details carefully read our Privacy and Cookies Policy. ...>>>You can change your preferences or withdraw your consent at any time by deleting the cookies from your website or computer as described in the policy. Please accept it and choose your preferences by ticking the corresponding boxes in the "Manage Settings" section below. Please carefully read our Terms of Service before you proceed with using any part of this website.
«Manage Settings