Developing a Non-invasive Cardiac Functional Health Status Measurement Device
Developing a Non-invasive Cardiac Functional Health Status Measurement Device to be Used in a Critical Population of Adults and Children With Heart Failure.
Study Overview
Status
Status
Conditions
Conditions
Intervention / Treatment
Intervention / Treatment
Detailed Description
Study Type
Study Type
Enrollment (Actual)
Enrollment
Phase
Phase
- Not Applicable
Contacts and Locations
Study Locations
-
-
Florida
-
Gainesville, Florida, United States, 32610
- University of Florida
-
-
Participation Criteria
Eligibility Criteria
Eligibility Criteria
Ages Eligible for Study
Accepts Healthy Volunteers
Genders Eligible for Study
Description
Inclusion Criteria:
- Heart failure patient eligibility shall consist of the following:
Group 1a: 5 adult heart transplant patients
- Age ≥ 21 years old and <74 years old
- Speaks and understands English
- Provides Informed Consent
Group 1b: 5 pediatric heart transplant patients
- Age ≥ 7 years old and < 21 years old
- Speaks and understands English
- Provides Informed Consent
Group 2: 5 adult heart failure patients
- Age ≥ 21 years old and <74 years old
- Speaks and understands English
- Provides Informed Consent
Group 3: 5 adult aged Fontan patients
- Age ≥ 21 years old and <74 years old
- Speaks and understands English
- Provides Informed Consent
Group 4: 5 pediatric Fontan patients
- Age ≥ 7 years old and < 21 years old
- Speaks and understands English
- Provides Informed Consent
Group 5: 5 pediatric patients limited to heart murmurs
- Age ≥ 7 years old and < 21 years old
- Speaks and understands English
- Provides Informed Consent
Group 6: 5 normal adult patients
- Age ≥ 21 years old and <74 years old
- Speaks and understands English
- Provides Informed Consent
Exclusion Criteria:
• Unstable patients per judgment of the clinician prior to the start of the treatment
- Patients unable to have blood pressure cuff measured on the upper arm
- Inability to wear monitor on forehead
- Patients will be excluded from the study if they have eaten, consume caffeinated beverages, or taken hypertensive medications within 2 hours of testing
Study Plan
How is the study designed?
Design Details
- Primary Purpose: Diagnostic
- Allocation: N/A
- Interventional Model: Single Group Assignment
- Masking: None (Open Label)
Number of Arms
Arms and Interventions
Participant Group / ArmParticipant Group / Arm |
Intervention / TreatmentIntervention / Treatment |
|---|---|
|
Experimental: CVInsight (TM)
Patient will be placed on a tilt table and pulse oximetry (Nonin Medical)and blood pressure will be measured at different table positions (different angles).
A hemodynamic monitor called CVInsight(TM) will be used to monitor the pulse oximeter readings.
|
Patient will be placed on a tilt table and pulse oximetry (Nonin Medical) and blood pressure will be measured at different table positions (different angles).
Four positions will be explored.
A hemodynamic monitor called CVInsight(TM) will be used to monitor the pulse oximeter readings.
|
What is the study measuring?
Primary Outcome Measures
Primary Outcome Measures
Outcome Measure |
Measure Description |
Time Frame |
|---|---|---|
|
Pulse Rate
Time Frame: Average pulse rate from baseline to 30 minutes
|
Continuous change of pulse rate from baseline through the end of the study will be followed.
Changes in pulse rate will be plotted against the four tilt table positions.
Four positions will be explored, Mounting position, baseline, passive leg raise (cardiac preload dependent) and orthostasis head raise (cardiac afterload dependent).
Patients go from mounting position, to baseline, to the corresponding position (passive leg raise or orthostasis head raise) and back to baseline.
The assessment will take 30 minutes.
From the graph, average pulse rate is calculated.
|
Average pulse rate from baseline to 30 minutes
|
|
Pulse Strength
Time Frame: Average pulse strength from baseline to 30 minutes
|
Continuous change of pulse strength from baseline through the end of the study.
Pulse strength is measured as volts by the system.
Changes in pulse strength will be plotted against the four tilt table positions.
Four positions will be explored, Mounting position, baseline, passive leg raise (cardiac preload dependent) and orthostasis head raise (cardiac afterload dependent).
Patients go from mounting position, to baseline, to the corresponding position (passive leg raise or orthostasis head raise) and back to baseline.
The assessment will take 30 minutes.
Cardiac function curves will be constructed with the data collected and average pulse strength from baseline to 30 minutes will be reported.
|
Average pulse strength from baseline to 30 minutes
|
Collaborators and Investigators
Sponsor
Sponsor
Study record dates
Study Major Dates
Study Start
Study Start
Primary Completion (Actual)
Primary Completion
Study Completion (Actual)
Study Completion
Study Registration Dates
First Submitted
First Submitted
First Submitted That Met QC Criteria
First Submitted That Met QC Criteria
First Posted (Estimate)
First Posted
Study Record Updates
Last Update Posted (Estimate)
Last Update Posted
Last Update Submitted That Met QC Criteria
Last Update Submitted That Met QC Criteria
Last Verified
Last Verified
More Information
Terms related to this study
Additional Relevant MeSH Terms
Other Study ID Numbers
Other Study ID Numbers
- IRB201300055
This information was retrieved directly from the website clinicaltrials.gov without any changes. If you have any requests to change, remove or update your study details, please contact register@clinicaltrials.gov. As soon as a change is implemented on clinicaltrials.gov, this will be updated automatically on our website as well.